Anyone considering doing this should understand that this writes to your NTFS partition with Knoppix. Some people think this is safe. Other people report problems with it, including completely destroying their data.
Heres a small script I wrote that auto detects if Vista or XP is in Use. It then mounts the partition
and runs chntpw in interactive mode. If dual boot i.e. Vista and XP are in use, it detects both OS's
giving the option to reset or quit.
You can copy the lines inssert the file onto a usb drive. Next time you use knoppix 5.11 or 5.31
install chntpw first:
apt-get update
apt-get install chntpw
Use the script at your own risk, theres always an element of piracy hence the warning message.
#!/bin/sh
#password reset for XP/Vista run as sudo or kdesu
#
#
clear
echo -e "\E[32m Reset Password Utility for XP and Vista"
echo
echo
echo
for i in hda1 hda2 hda3 hda4 hdb1 hdb2 hdb3 hdb4 sda1 sda2 sda3 sda4 sdb1 sdb2 sdb3 sdb4
do
mkdir /media/$i 2>/dev/null
mount /dev/$i /media/$i 2>/dev/null
# Detect WinXP
if [ -e /media/$i/boot.ini ]; then
echo -e "\E[37m Windows XP detected on /dev/$i"
echo
echo -e "\E[33m Warning:";echo -e "\E[31m Please ensure you have a reasonable guarantee from the customer that
this computer is owned by them before proceeding."
echo -e "\E[32m "
echo
sleep 6
chntpw -i /media/$i/WINDOWS/system32/config/SAM
umount /media/$i
fi
# Detect Vista
clear
if [ -e /media/$i/Users ]; then
echo -e "\E[36m Windows Vista detected on /dev/$i"
echo
echo -e "\E[33m Warning:";echo -e "\E[31m Please ensure you have a reasonable guarantee from the customer that
this computer is owned by them before proceeding."
echo -e "\E[36m "
echo
echo
sleep 6
chntpw -i /media/$i/Windows/System32/config/SAM
umount /media/$i
fi
if [ $i == sdb4 ] && [ -e /media/$i/Users -o -e /media/$i/boot.ini ]; then
echo -e "\E[36m No Operating System detected"
sleep 4
fi
done
Anyone considering doing this should understand that this writes to your NTFS partition with Knoppix. Some people think this is safe. Other people report problems with it, including completely destroying their data.
---
Verifying of md5 checksum and burning a CD at slow speed are important.
Yes, good point. With knoppix 5.1.1 which uses kernel 2.4.19 a warning does appear about upgrading to a kernel 2.6.20 or higher when using ntfsprogs. Personally I've never lost data on an NTFS partition using linux, even with the earlier Captive program on a 2.4.xx kernel, but have lost plenty of data with windows. Knoppix 5.3.1 uses kernel 2.4.24 but there is always a small element of risk.Originally Posted by Harry Kuhman
Even the chntpw program suggests not changing a password but just blanking it. The above script should therefore be used at your own risk, as stated previously.
I'm among those lucky one which never lost any data when writing to ntfs.
I double check on my knoppix 5.1.1, it runs kernel 2.6.19.
Just curious, on your shell script, the /dev/$i is mounted as read-only. So does that mean that the program chntpw still be able to write to the mount point /media/$i?
Rgds,
Chip
Hi Chip,Originally Posted by chip.ling
Sorry wrote this using knoppix 5.3.1 which uses ntfs-3g as default and therefore mouting ntfs partitions are rw.
Forr knoppix 5.1.1 install ntfs-3g
and change the following line
mount /dev/$i /media/$i 2>/dev/null
to read
mount -rw /dev$i /media$i 2>dev/null
this should mount all partitions with rw access.
HP ProLiant DL380 Gen9 8SFF Server - E5-2698 v3 - 32Cores - 128GB Ram - 1TB HDD
$299.00
Dell R730xd 26 Port SFF 2x E5-2697v4 36-Cores H730 128GB Server 2x SFP 10G ENT
$490.00
Dell Poweredge R620 2x E5-2680 2.7ghz 16-Cores / 128gb / H710 / 2x Trays / 750w
$199.99
HP ProLiant DL380 Gen9 Server 1x Xeon E5-2620V3 2.40 GHz 32 GB RAM No OS No HDD
$129.95
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 32GB RAM No HDD
$289.99
Dell R630 Server 2x E5-2620 V4 2.1GHz =16 Cores 128GB DDR4 1x 960GB 2x 1G 2x 10G
$345.00
Chenbro NR12000 1U 1x 8m QUAD CORE E3-1230v2 3.3GHz 8GB RAM NO HDD
$239.00
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
DELL PowerEdge R730 Server 2x E5-2697v4 2.3GHz =36 Cores 128GB H730 4xRJ45
$478.00
Lenovo SR530 Server (Intel Xeon Silver 4110) (3x 800GB SSD) (NO OS) (48GB RAM)
$599.00