-
how do i get screen resolution 1024x768 to stick on an hd install?
Just a silly question, I've got knoppix installed to the hard drive and it works quite nicely. However, every time I boot, the resolution is auto-detected at 1600x1200 and I am used to 1024x768. On each boot, I have to manually change the resolution which is easy to do, but after the 100th time... How do you get the resolution to "stick" after a reboot. Thanks, Don
-
Originally Posted by
don999
Just a silly question, I've got knoppix installed to the hard drive and it works quite nicely. However, every time I boot, the resolution is auto-detected at 1600x1200 and I am used to 1024x768. On each boot, I have to manually change the resolution which is easy to do, but after the 100th time... How do you get the resolution to "stick" after a reboot. Thanks, Don
Hey-
Good to hear you're using Knoppix! Just need some details to know which way to steer you. Did you use the hdinstall script, or do a "poor mans' install", i.e this:
Code:
knoppix tohd=/dev/sda1
from the Knoppix boot command line? If the latter, did you create a "persistent store file" when prompted? That would allow changes to 'stick'. Or perhaps you mis-spoke, and meant that you're booting into the LiveCD environment each time - that would not allow changes to stick. There are some useful tips in the Knoppix cheatcodes file, which you can get from the KNOPPIX folder on the CD even in Windows, or here, for instance.
Let us know!
Cheers!
Krishna
-
Hi Krishna, Yes I'm still using knoppix! When I heard about the 6.3 linuxmagazine DVD I had to rush out and buy it. I used the 0wn installer (in Preferences/Knoppix HD install) and most settings will stick (like turning off the compiz corner actions, it took me forever to figure out out to do that heh heh). I suppose I could try editing the bootup cheatcodes in grub... Don
Originally Posted by
krishna.murphy
Hey-
Good to hear you're using Knoppix! Just need some details to know which way to steer you. Did you use the hdinstall script, or do a "poor mans' install", i.e this:
Code:
knoppix tohd=/dev/sda1
from the Knoppix boot command line? If the latter, did you create a "persistent store file" when prompted? That would allow changes to 'stick'. Or perhaps you mis-spoke, and meant that you're booting into the LiveCD environment each time - that would not allow changes to stick. There are some useful tips in the Knoppix cheatcodes file, which you can get from the KNOPPIX folder on the CD even in Windows, or
here, for instance.
Let us know!
Cheers!
Krishna
-
success! I edited /boot/grub/menu.lst and added screen=1024x768 onto the knoppix command line. SWEET!!!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$179.99
ORICO 5 Bay Raid Hard Drive Enclosure USB C, 3.5” SATA HDD, Up To 80TB, NS500RC3
$139.99
Dell EMC 092GD6 Broadcom 9305-16i LSI Quad Port 4 Port SAS RAID Controller
$84.99
G-TECHNOLOGY G-RAID GR4 2000 2TB EXTERNAL HARD DRIVE USBFIREWIREeSATA *LOW USE*
$37.99
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 4Y5H1 High Profile
$13.99
G-Technology G-SPEED Shuttle XL 80TB (8x 10TB HDD) Thunderbolt 3 RAID Array
$3500.00
9207-8i PCIE3.0 6Gbps HBA LSI FW:P20 IT Mode ZFS FreeNAS unRAID 2* SFF-8087 US
$32.88
Yottamaster 5 Bay RAID Hard Drive Enclosure Type-C B For 2.5" 3.5" SATA HDD SSDs
$140.99
ORICO 5Bay Raid Hard Drive Enclosure USB3.0 to SATA for 3.5'' HDD SSD 150W Power
$115.99