-
Dell Inspiron Laptop - No suitable X-Server found
Okay... As I go through the standard boot up sequence for Knoppix I get this...
Starting X11.....
Retrying with Server XFree86(vesa) .
Retrying with Server XFree86(fbdev) .
Error: No Suitable X-Server found for your card.
I am at a complete loss, as I know the cd works (It works in my desktop PC), and the failsafe command does not work.
at the command line I use
knoppix lang=us screen=800x600 noscsi failsafe
(stalls if I do not include noscsi)
Any suggestions would be greatly appreciated!
-
Senior Member
registered user
take away the screen= line and see if you can start with the vesa driver at 640x480.
you didn't tell what graphic chipset you have.
I have an inspiron 2500 which use i810 and had minor problem with XFree 4.21 and the XF86Config-4 shipped in early version of KNOPPIX. XFree 4.3 however works fine out of the box.
-
Senior Member
registered user
Yeah there's at least a dozen inspiron models. Like saying "My GM doesn't start"
-
Senior Member
registered user
Originally Posted by
stonent
Yeah there's at least a dozen inspiron models. Like saying "My GM doesn't start"
That is easier to answer, get a Toyota or Honda
-
Senior Member
registered user
Aside from the NSX, Japanese cars don't do much for me.
-
1) Inspiron 2600 using that very finicky I810 chipset from Intel for the video.
(Apologize for forgetting that - I shouldnt have posted at 2 in the morning lol)
2) I'll go ahead and try that vesa driver at 640.
Tried now.. It didn't go - same problem - no suitable X-Server. =/
I got Knoppix to go ahead and load completely with the following command line
knoppix lang=us xserver=XF86_SVGA xmodule=vesa noscsi noagp
however the screen resolution is so small as to prevent any real use.
(If I miss something really obvious, don't leave it out... I'm almost a complete Knoppix/Linux noob. =/)
Also, I don't know if it's useful, but every time I boot, I get the message
You passed an undefined mode number.
Press <RETURN> to see video modes available. <SPACE> to continue or wait 30 secs.
I'm not sure what to do here =/
-
Senior Member
registered user
As far as I know, 2600 is almost the same as my 2500 and it should work with i810 which KNOPPIX detected out of the box. You may try the following :
KNOPPIX 2
to get into runlevel 2 and "startx", much easier to debug as you can play around with the /etc/X11/XF86Config-4 settings without reboot.
-
What should I go about editing in this XF86Config-4 file?
Nevermind that I found some good stuff by other users on this =P
-
Senior Member
registered user
Originally Posted by
MSantangelo
1)
knoppix lang=us xserver=XF86_SVGA xmodule=vesa noscsi noagp
however the screen resolution is so small as to prevent any real use.
(If I miss something really obvious, don't leave it out... I'm almost a complete Knoppix/Linux noob. =/)
Also, I don't know if it's useful, but every time I boot, I get the message
You passed an undefined mode number.
Press <RETURN> to see video modes available. <SPACE> to continue or wait 30 secs.
I'm not sure what to do here =/
Have you tried putting vga=normal in the cheat code?
-
For all the editing I do, whenever I try to start the modified X-Server config (i got this error BEFORE I tried editing it as well)
(EE) I810(0): No Video BIOS modes for chosen depth.
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error: no screens found.
XIO: Fatal IO error 104 (Connection reset by peer) on X server ":0.0' after 0 requests (0 known processed) with 0 events remaining
Similar Threads
-
By jefwic in forum Hardware & Booting
Replies: 3
Last Post: 06-07-2005, 01:45 AM
-
By monkuncle in forum Laptops
Replies: 0
Last Post: 01-08-2005, 10:00 PM
-
By jimeee in forum General Support
Replies: 0
Last Post: 11-03-2004, 10:04 PM
-
By Stig in forum Hardware & Booting
Replies: 5
Last Post: 07-07-2003, 01:34 AM
-
By Rudeboy in forum Hardware & Booting
Replies: 4
Last Post: 03-31-2003, 07:05 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports
$149.00
Australia Linux Server- 32 GB RAM + 500 HDD + 6 Core processor
$66.40
1U 10 SFF Bay Supermicro Server X10DRW-iT 2x Xeon E5-2690 V4 128GB DDR4 RAM
$428.00
Canonical Ubuntu Linux - DVD / USB Drive - 24.04 LTS / 23.10 / 22.04 / 18 / 16
$9.99
PFSENSE 15" Depth Server Supermicro X11SSH-F E3-1240 V5 V6 - 128GB NVME 32GB RAM
$359.00
PFSENSE 15" Depth Server Router Firewall Supermicro X11SSH-F E3-1240 V5 32GB RAM
$382.00
IBM 9006-22C 12 Bay LFF SAS3 12G Dual 22 Core 2.6GHz Power9 P9 Linux Server
$2799.99
Many Linux or BSD Versions on Live Boot 16GB Key USB Disk Stick You Choose One
$12.95
POGO Linux WEBWARE 1150 Rack-Mount Server Pentium 4 2.8GHz 512MB - No Drives
$179.99
IBM System X 3250 M5 Single Xeon Quad Core E3-1220 v3 @3.1GHz,8GB RAM,Linux SUSE
$159.00