While using knoppix 7.0.2, after going into "suspend" mode my system is back as it was before except for the network connectiion to the router. This is the error message I am getting when I try to get a new (or activate my old?) DHCP connection:
~Code:$ sudo netcardconfig eth0 Sending DHCP broadcast from device eth0Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0/00:23:8b:98:6a:64 Sending on LPF/eth0/00:23:8b:98:6a:64 Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 19 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 No DHCPOFFERS received. Unable to obtain a lease on first try. Exiting. Failed to bring up eth0.
How can I fix that?
~
thanks
lbrtchx
Last edited by Albretch; 08-01-2012 at 04:09 PM.
Vintage MATROX 856-02 REV.A AGP Video Graphics Card 8MB VGA
$15.00
Genuine Vintage Intel A80386-20 20MHz Ceramic Processor - Double Sigma (ΣΣ)
$22.00
Apple Macintosh IIci Cache Card 820-0351-A Vintage Computing
$75.00
1994 Word Perfect 🖋️ for WINDOWS V6.1 Vintage
$9.99
Vintage Jetway J-656C Motherboard
$75.00
PCChips M396 V1.1 motherboard vintage
$75.00
Vintage- Toshiba Satellite Pro 430CDT/1.3 System Unit Model-PA1230U XCD *Powers
$49.99
Vintage Toshiba T3100 System Unit Model PA7037U Powers ON
$49.99
Vintage Commodore Monitor Model 1802 Made Korea *Read Description*
$69.99
Lot of Vtg. IBM/Intel PC Motherboard / RAM Parts + VGA Card Socket 7 - UNTESTED
$45.00