How big are your files for Fat32?
....strange behavior.....using my new USB HDD 500GB instead of the broken internal 60GB SDD.
For Knoppix Live Usb I create:
- 1° partition FAT32 about 50GB with Syslinux Boot folder
- 2° partition NTFS about 300GB with my 7GB presisten image and 1GB extra personal data and future VirtualBox HDD image
- 3° partirion EXT2 about 150GB for temporary store to try to use recombine script (see the Werner P. Schulz recombine script at http://www.wp-schulz.de/knoppix/recombine.html)
Usually this 3° partition is un-allocated and all work fine.
But after activating the 3° Ext2 partition using GParted, exit and reboot....the system break in kernel panic with an error about the mount of mnt-system...
I think the problem is the Init script in minirt.gz
It seems that the EXT2 partition is the favorite to be mounted as mnt-system/knoppix instead the NTFS (where knoppix-data.img is real located).
Any suggestion ? There is a bug ?
Thanks
Bye
How big are your files for Fat32?
Sure there is either a bug or some file or hardware error. But you give too little information to tell what it is. I like to keep things as simple as possible, which means that I keep KNOPPIX and the persistent image at the same place (the default setup), and I use legacy grub for booting. In your case, I would have created a smaller ext2 partition in addition to the other, installed grub to that, made it active, and then created different menu items for KNOPPIX. After copying the contents of the syslinux boot directory to a subdirectory knx671 on the boot partition, I would have forgotten about it.
Here are my grub entries for Knoppix 6.7.0, incidentally I have this version of KNOPPIX on the boot partiton - that's just because all the other partitions were in use for other versions, the norm is that the boot partition is not mounted during normal use.
Code:title Knoppix 6.7.0 all arch (sda5) kernel (hd0,4)/boot/knx670/linux ramdisk_size=100000 lang=no keyboard=no fromhd=/dev/sda5 nosound vt.default_utf8=0 apm=power-off initrd=minirt.gz nomce libata.force=noncq loglevel=1 tz=localtime initrd (hd0,4)/boot/knx670/minirt.gz title Knoppix 6.7.0 64 bits kernel (sda5) kernel (hd0,4)/boot/knx670/linux64 ramdisk_size=100000 lang=no keyboard=no fromhd=/dev/sda5 nosound vt.default_utf8=0 apm=power-off initrd=minirt.gz nomce libata.force=noncq loglevel=1 tz=localtime initrd (hd0,4)/boot/knx670/minirt.gz
Did you use my script or not? If so, tell us step by step what you've done. In case of error, what messages? Otherwise what else is on partition#3?- 3° partirion EXT2 about 150GB for temporary store to try to use recombine script (see the Werner P. Schulz recombine script
Greetings Werner * http://www.wp-schulz.de/knoppix/summary.html
Own Rescue-CD (Knoppix V6.7.1 remaster)
I use the recombine script and works well. Thanks Werner P. Schulz !!
The strange behavior happen before using the script, when I created tree partitions and normally boot the first time.
With 3° EXT2 partition active system halted in kernel panic with an error about the impossibility of mounting Knopppix in mnt-system
With 3° partition removed (un-allocated) all works fine
I'll try again
partially solved using at boot the cheat KNOPPIX FROMHD=/dev/sda2 instead the auto search
I'll try to change the 3° partition in NTFS or other and try again
I want understand
Why should NTFS vs ext2 make any difference here?
And when you make a partition active, you tell the system to boot from there, right?
I think that whenever we experiment with alternative setups from the default, leaving it to then Knoppix init to find and mount a Knoppix image may be relatively bad practice. Always specify fromhd= in such situations. (For me, init may find 5-7 Knoppixes, small probability it will auto-pick the correct one )
probably nothing.....
sure best to use cheats fromhd=
experience leads to knowledge ))
HP Z820 Workstation 2x Xeon E5-2690 2.9ghz 16-Cores / 128gb Ram / 1Tb HD / Win10
$419.99
Matched Pair __ Intel Xeon Gold 6152 2.1Ghz 22-Core 140W CPU SR3B4
$209.95
Dell Precision 5810 Workstation Xeon E5-1650 6C 3.5GHz 16GB 500GB Win10 K2200
$124.67
HP Z420 Workstation Xeon E5-2690 2.9ghz 8-Cores / 32gb / 1TB / DVD / Win10
$119.99
Intel Xeon E5-2697 V4 2.30 GHz 18C 2011-3 2400MHz 45MB 145W SR2JV CPU Processor
$49.99
SR1XP Intel Xeon E5-2680 v3 12 Core 30MB 2.5GHz LGA 2011-3 Grade A Processor
$3.97
Intel Xeon E5-2697A v4 SR2K1 2.60GHz 40MB 16-Core LGA2011-3 CPU Processor
$39.99
Xeon E5-2699v4 CPU, SR2JS, have 16 total
$150.00
Intel Xeon E5-2697A V4 2.6GHz 16-Core Processor CPU LGA2011 SR2K1
$47.99
Intel Xeon E3-1285 V3 3.6 GHz 8M Quad-Core SR14W CPU Processor
$49.50