So I am considering the purchase of a banged up macbook as a fixer-upper. It has a broken monitor and there currently is not an operating system installed. I need to test it to make sure that it can boot up before handing over any money for it. My plan was to use the Knoppix live boot cd and a mini-dvi to rca adapter that connects to a small portable television. I have a macbook of my own so I am using that to test if my approach will work. Upon boot up Knoppix starts up just fine and the dvi adapter is auto-detected so it is getting a signal. But my little television displays three rows, each containing scrambled copies of the proper screen, without color, that slide almost like a vhs tape that is tracking incorrectly. Occasionally a "No Signal" message appears and then a second later it flashes back to the sliding rows. I am assuming that there is some setting I must change in the "Monitior Settings" to get the proper appearance. But I have no idea what that setting might be. Any thoughts / suggestions would be appreciated. Thanks.
Matt
Open Eye OE-MTX08 8TB Micro Server With Linux (Boots To Login) No Accessories
$282.92
Australia Linux Server- 32 GB RAM + 500 HDD + 6 Core processor
$66.06
Red Hat Enterprise Linux 5 Server - New and Sealed
$19.99
LattePanda Sigma - x86 Windows / Linux Single Board Computer Server (32GB RAM)
$550.00
IBM Power8 S822L 20-Core 3.42GHz 256Gb 1.2Tb 40G Elastic Storage Server 5148-22L
$599.95
1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports
$149.00
IBM E850 Power8 2x 12C 3.02GHz 512Gb 1.8Tb SAS 10GbE 16Gb Linux Server 8408-E8E
$899.95
PFSENSE 15" Depth Server Router Firewall Supermicro X11SSH-F E3-1240 V5 32GB RAM
$382.00
POGO Linux WEBWARE 1150 Rack-Mount Server Pentium 4 2.8GHz 512MB - No Drives
$179.99
1U Open Source Router Firewall X10SLH-N6-ST031 E3-1270 V3 6x 10GB Ethernet 16GB
$419.00