1) How can I make knoppix64 the Default boot option?
I tried editing the first Default in /KNOPPIX/boot/syslinux/syslinux.cfg but it didn't work!
2) I can't figure out how to activate my Desktop webcam, connected via usb port:
Am I missing something?lsusb: Bus 001 Device 007: ID 046d:0825 Logitech, Inc. Webcam C270
3) What is the Password for Knoppix User? I was asked for it when I tried to setup my printer.
It works when I enter 'knoppix64' at boot and I know how to access and edit syslinux.cfg.
When I change the first line to "Default knoppix64" I wreck the system, not bootable anymore, black screen with messageI attached the edited syslinux.cfg file. I hope somebody can help.No DEFAULT or UI configuration directive found! boot:
@ Karibou
I was surprised that the default knoppix64 does what it does in my 702.
It goes ahead and comes up with the 'linux' kernel (32-bit) rather than
'linux64' (64-bit).
When you say the cheat code 'knoppix64' worked, did you do a 'uname -s' to see
what kernel you got? If 'uname -s' says 'linux64', it worked; if it says
'linux', you still have a 32-bit kernel.
The 'fine print' in Klaus K's 702 write-up says:
"Optional 64-bit Kernel via boot option 'knoppix64', supporting systems with more than
4GB of RAM and chroot to 64-bit installations for system rescue tasks (DVD version only)."
I have a bit shy of 4 Gb in my 64-bit system, so I (now) know I don't qualify for
a 64-bit default selection.
Last edited by utu; 06-06-2012 at 08:23 PM.
One reason may be illustrated here: Avoid misleading people to think tht Iey can get real 64 bit system by choosing knoppix64. But I think 64-bits may do a better job in several cases, also with less memory. At least I have got the impression with an Asus ULV30.
@ Capricorny
I was surprised to see this restriction.
I thought there was some utility for near-but-less-than 4 Gb 64-bit computers to use 64-bit processing.
Say, in re-mastering, to speed things up.
And, I thought we had that capability in 6.7.1.
Is my memory receding faster than I'm aware?
@ Capricorny
I was surprised to see this restriction. I thought there was some utility for near-but-less-than 4 Gb 64-bit computers to use 64-bit processing.
Say, in re-mastering, to speed things up.
And, I thought we had that capability in 6.7.1.
Is my memory going faster than I'm aware?
Also I would qualify from the memory point of view (15+GB) I get Linux too:
. I thought I had the 64bit version. As this is not the case, then my new THREAD is irrelevant!knoppix@Microknoppix:~$ uname -s
Linux
I guess this restriction may be rather easily patched, as it is (or rather would normally be) only a question of choosing between two kernel images. But that doesn't make plain Knoppix more of a 64-bits system. For something more purely 64bits: Has anyone tried the advertised option to chroot into a 64 bits install? If that technique works, it may be possible to get somewhere faster..
See Klaus K's comments at Post #42 here:
http://knoppix.net/forum/threads/298...comments/page5
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$179.99
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$55.45
Dell 7H4CN PERC H730P Raid Controller Mini Mono12GBPS 2GB NV Cache
$44.99
Yottamaster 2 Bay RAID Hard Drive Enclosure USB3.1 Type B For 3.5" inch SATA HDD
$75.99
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
DELL PERC H310 RAID Controller with Cables, OHV52W, 6Gb/s SAS SATA PCIe x8
$19.95
Inspur LSI YZCA-00424-101 Raid Card 12Gbps HBA Controller Low Profile 9300-8i IT
$15.98
Dell PERC V10 Z0017A SAS-SATA RAID Controller Card No Bracket N4C2D 5R10N
$52.97
Yottamaster 2 Bay USB 3.1 RAID Hard Drive Enclosure For 2.5" SATA HDD SSD UASP
$59.99