I got the knoppix latest version. Booted with knoppix64 from DVD. uname shows
that it is using the 64 bit version. Cool. Installed to hard drive, but it installs 32 bit?
I installed it to an SSD drive which makes it very fast, but not all of the memory is
recognized.
Another thing is that version 7 doesn't allow the Browse for smb printers. Version 6
works perfectly and finds my XP host and printer. Everything is good with that.
Wireless detected perfectly in knoppix 7. How do I get rid of the exploding windows
when they close. I cannot find out how to change that. It should be an easy right?
Thanks - you guys are all great. Gals too.
Thank you so much. Could not find it!!
I tried to boot with a DVD and knoppix64 fromhd=/dev/sda. It is looking for a usb. sda is the hard drive. How would I
get it to see the hard drive. It also says my SSD is not partitioned. I thought I did that when installed it to the hard drive.
Hmmm. I think if I tried to use gpart I would lose all my data. No big deal, since I can start over if needed.
What happens if you tryWhat is the output fromCode:knoppix fromhd=/dev/sda1andCode:blkidCode:fdisk -l
Thanks Werner!
root@Microknoppix:/home/knoppix# blkid:
/dev/zram0: UUID="3e104d0a-d92e-44bb-b375-02cbb0259263" TYPE="swap"
/dev/sda1: UUID="0d71ae1b-0b47-4a51-b158-c5911839c787" TYPE="swap"
/dev/sda2: UUID="b65f0041-e743-41f4-94a2-6496dfbcae97" TYPE="reiserfs"
/dev/sr0: LABEL="KNOPPIX" TYPE="iso9660"
root@Microknoppix:/home/knoppix# fdisk -l
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sda1 1 2104514 1052257 82 Linux swap / Solaris
/dev/sda2 * 2104515 234436544 116166015 83 Linux
knoppix fromhd=/dev/sda2 looks for usb??
If I put knoppix64 on a usb it works. Not so much a hard drive.
Go to /boot and copy vmlinuz-3.6.11-64 into vmlinuz and it will default to the 64 bit kernel on boot.
No, it looks for a Poor man's install - no matter whether this install is on an internal harddrive, external USB drive or USB stick. You only have to know the right partition name and number at boot time.looks for usb??Code:knoppix fromhd=/dev/sda2
Last edited by Werner P. Schulz; 05-01-2013 at 10:36 AM.
Thanks so much Werner. Works. So easy!
root@Microknoppix:/home/knoppix# uname -r
3.4.9-64
DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 64GB H730 4xRJ45
$314.00
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$89.99
Dell R630 Server 2x E5-2620 V4 2.1GHz =16 Cores 128GB DDR4 1x 960GB 2x 1G 2x 10G
$210.00
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB
$510.00
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
Dell Poweredge T430 8 Bay Server Dual Xeon E5-2683 V4 32 Cores 64GB DDR4 2X SSD
$799.00
Dell Poweredge R730xd 2.5in 2x E5-2690 v3 2.6ghz 24-Cores 64gb H730 2x 750w
$189.99
DELL PowerEdge R630 8SFF Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$264.00
Dell PowerEdge R430 1U Server 2x E5-2660 v3 2.6ghz 20Cores 32gb 4Trays H730 2PSU
$249.99