Results 1 to 2 of 2

Thread: Howto: Laptop/PC + "Internet via ADSL/PPPOE/DHCP" as "router via WAN" to Tablet

  1. #1
    Senior Member registered user
    Join Date
    Dec 2008
    Location
    Mysore, India
    Posts
    272

    Howto: Laptop/PC + "Internet via ADSL/PPPOE/DHCP" as "router via WAN" to Tablet

    I have a Huawei MediaPad 7 Youth 2 with Android 4.3. I have a 2G SIM from BSNL, karnataka, and charged it with 2G data plan. The transmission is very slow and I can't install apps. The data network gets disconnected frequently.
    Is there a way to use the PC's broadband internet connection via some way? There is a tethered USB option in my tablet. Can it be used?
    Is there a way to use the PC's wireless networking? To make the PC/Laptop as a wireless router and the tablet use that WAN network?
    There is a post: How to Debian linux act as a router
    Also, there is a debian article, NetworkManager
    Also, another post Debian / Ubuntu Linux: Setup Wireless Access Point (WAP) with Hostapd
    The matter appears beyond my present abilities.
    The articles are conflicting. Moreover, I wish to use the Network Manager applet and to make the PC/Laptop as a wireless router and the tablet use that WAN network.
    Or, any other simple way possible...
    Please note that my internet service provider, BSNL, provides a dynamic IP for my connection plan. Hence, I don't wish to overwrite the files /etc/network/interfaces and sysctl.conf
    Please advise.
    Last edited by rajibando; 02-11-2015 at 05:16 AM.

  2. #2
    Senior Member registered user
    Join Date
    Dec 2008
    Location
    Mysore, India
    Posts
    272
    The tab is Huawei Mediapad 7 Youth 2, with Android 4.3. The tab can be connected to a computer using its mini USB port and a USB cable.
    the code:
    Code:
    ip addr show
    yields:
    5: usb0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 1000
    link/ether 02:3c:6d:51:04:05 brd ff:ff:ff:ff:ff:ff
    inet6 fe80::3c:6dff:fe51:405/64 scope link
    valid_lft forever preferred_lft forever
    This article is of interest: Bridging Network Connections, particularly,
    Code:
     # brctl addbr br0
    and
    Code:
    brctl addif br0 usb0 usb1
    i.e., or something similar, i.e., the usb0 of the first (server) to the second (Huawei).
    I need some guidance.
    Last edited by rajibando; 02-11-2015 at 06:26 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W picture

Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W

$399.00



Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric picture

Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric

$139.99



DELL PEM640 POWEREDGE M640 BLADE SERVER picture

DELL PEM640 POWEREDGE M640 BLADE SERVER

$539.95



Dell PowerEdge M640 Barebone Server Blade No Hard Drive Trays picture

Dell PowerEdge M640 Barebone Server Blade No Hard Drive Trays

$499.00



Dell PowerEdge M520 Blade Server Xeon E5-2403 NO HDD NO RAM picture

Dell PowerEdge M520 Blade Server Xeon E5-2403 NO HDD NO RAM

$45.00



HP Proliant BL460C Gen8 Blade Server 2x 8C E5-2690 192GB Ram picture

HP Proliant BL460C Gen8 Blade Server 2x 8C E5-2690 192GB Ram

$58.23



Cisco B200 M4 Blade Server-No Ram picture

Cisco B200 M4 Blade Server-No Ram

$50.00



Dell PowerEdge M820 4x Xeon E5-4600 Blade Barebone Server NO CPU RAM HDD CADDY picture

Dell PowerEdge M820 4x Xeon E5-4600 Blade Barebone Server NO CPU RAM HDD CADDY

$199.89



Cisco UCSB-MLOM-40G-04 UCS VIC 1440 modular LOM for Blade Servers *Cisco Excess* picture

Cisco UCSB-MLOM-40G-04 UCS VIC 1440 modular LOM for Blade Servers *Cisco Excess*

$690.00



HP ProLiant BL460c Gen9 Blade 2x E5-2650v4 2.2GHz =24 Cores 128GB P246 650FLB picture

HP ProLiant BL460c Gen9 Blade 2x E5-2650v4 2.2GHz =24 Cores 128GB P246 650FLB

$261.00