-
Junior Member
registered user
Booting knoppix via RS232 terminal
Hello,
My CPU (Intel's ATOM) does not have a VGA, only RS232.
Is it possible to boot knoppix from RS232 ?
Thank you,
Z.V
-
Senior Member
registered user
I think you have to provide more information - but if it basically means that you have only text mode available, that should in principle work fine - just use the appropriate init level. But even basic RS232 support may be scarce nowadays, not to mention using it for display??? I suggest you ask on the Debian-knoppix mailing list.
-
Senior Member
registered user
Hello,
I think you have to configure the bootloader to communicate via serial port. I would also suggest you add a line to /etc/inittab which enables you to login via serial port.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
HP ProLiant DL380 Gen9 8SFF Server - E5-2698 v3 - 32Cores - 128GB Ram - 1TB HDD
$299.00
Dell Poweredge R730xd 3.5 2x E5-2690 v3 2.6ghz 64gb H730 14x Trays 2x 1100w
$489.99
Dell PowerEdge R710 2.5" 2U Server 2x X5670 2.93GHZ 12-Core 128gb 2x 1TB SAS
$214.99
Dell Poweredge R520 2x Xeon E5-2470 v2 2.4GHz 20-Core 192gb 8xTray H710 2x750w
$344.99
Dell PowerEdge R620 Server 2x E5-2660 v2 2.2GHz 20 Cores 256GB RAM 1x 480GB SSD
$139.99
24 Cores 2.6Ghz 32GB DDR4 Dell PowerEdge R730 Server H730 Raid Card 2x 1GB RJ45
$274.00
HPE Proliant DL360 Gen9 1x Xeon E5-2620 V4 2.10GHZ 32GB DDR4-2133MHZ 2x 500W PSU
$100.95
Dell Poweredge R210 II Server Xeon E3-1220 v2 3.1ghz Quad Core / NoRam / 1x Tray
$69.99
HP ProLiant DL360p G8 Server 2x E5-2690 2.9GHz 16-Cores / 192GB / P420 / 2x 750w
$189.99
Lenovo SR530 Server (Intel Xeon Silver 4110) (3x 800GB SSD) (NO OS) (48GB RAM)
$599.00