-
knoppix-install only gives me 2 options?!
Hello Everyone,
I've tried knoppix-install on a few different machine, but it only seems to work on one. In must case I only get the two options.
1.partition
2.quit
On the one where it does work, I get all the options, partition, install, load, save and quit. The oddity is on the systems where it doesn't work, I have to kill the installer to get out of it.
Any ideas?!
cesman
-
Senior Member
registered user
I'm not sure what the cause of this is, but I recently experienced the same thing. Knoppix-installer worked fine as I was working through it the first time, but during this same first time through I had to kill the install. When I restarted it with the knoppix-installer script - the only options for me were to partition and to quit. I was in a hurry so I ended up using the old knx-hdinstall to install.
-
I think it is a hardware issue on one of my test systems. I've since tried on a laptop and my main workstation and all appears normal.
cesman
-
Yes maybe its a hardware issue, but there´s a workaround (worked for me anyway) Do the partitioning in cfdisk and quit, start knx-hdinstall and format your swap partition, quit and start knoppix-installer and you should see all options.
Regards
Mike
-
Senior Member
registered user
Sounds good. Thanks Mike.
-
Junior Member
registered user
Don't think it can be a hardware issue. First time I did the install on my laptop, I got the four options. Second time I did it, same machine , I got only two options.
With regard to the swap partition, perhaps it's worth pointing out that it's a good idea to fix the size you want before hard disc installing from the cdrom. Knoppix will use any swap partition it finds and while it is being used the size can't be altered.
-
Senior Member
registered user
I also fot the 2 options while using BOTH knoppix-installer and knx-hdinstall the reason is that "the disk does not contain a valid partition table"(see my related post on this). this does not happen on version 0606.
I think it is the new kernel.
Similar Threads
-
By kernco in forum Customising & Remastering
Replies: 4
Last Post: 04-05-2005, 08:35 AM
-
By kgw in forum Hdd Install / Debian / Apt
Replies: 3
Last Post: 03-05-2004, 02:37 AM
-
By miazmaticdotcom in forum Customising & Remastering
Replies: 2
Last Post: 01-29-2004, 04:25 PM
-
By Journey44 in forum General Support
Replies: 3
Last Post: 01-27-2004, 05:56 AM
-
By sireasoning in forum Ideas
Replies: 6
Last Post: 10-26-2003, 05:45 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$179.99
Dell EMC 092GD6 Broadcom 9305-16i LSI Quad Port 4 Port SAS RAID Controller
$84.99
OWC Guardian Maximus Raid Enclosure SATA Hard Drive FireWire
$36.99
Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 4Y5H1 High Profile
$15.99
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
9207-8i PCIE3.0 6Gbps HBA LSI FW:P20 IT Mode ZFS FreeNAS unRAID 2* SFF-8087 US
$32.88
Inspur LSI YZCA-00424-101 Raid Card 12Gbps HBA Controller Low Profile 9300-8i IT
$15.98
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$55.45
Yottamaster 2 Bay RAID Hard Drive Enclosure USB 3.1 For 2.5" SATA HDD SSD UASP
$56.25
Yottamaster 2 Bay RAID Hard Drive Enclosure USB 3.1 Type B For 3.5" SATA HDDs
$69.91