-
Lost my Admin password Help!
Help
I installed a new vid card and drive in my computer. I had Knoppix 9/5/03 but it would not boot to the new vid card (GForce 4) So I installed Knoppix 9/22/03 to the new hd and left the old Knoppix alone hoping to be able to transfer docs and files. All is well except I aparently mistyped my Administrators password! Now I can't do anything except user priv.
Is it possible to copy the old password file from the old install onto the new install to correct this? Or am I looking at a reinstall?
Please help
Thanks
-
Senior Member
registered user
Bummer- I guess you better reinstall......er wait- no that's wondoze. Sorry for the scare.
Hold the TAB key before lilo comes up, it will give you a prompt. Enter this:
linux single
It will boot to run level 1. You will be root. Enter this:
passwd
Reboot
*However.......this may not work. In that case...
Boot Knoppix cd.
Mount your /root partition:
sudo mount /dev/hdx? /mnt/hdx?
sudo chroot /mnt/hdx?
passwd
Exit chroot:
CTRL+D
Enjoy
-
The strange part is I do not get the log on screen now. I installed with "Like CD" option. Is there a way to reactivate that log in?
Thanks
Oh and Thank you for your help!
-
Senior Member
registered user
Originally Posted by
dave52355
The strange part is I do not get the log on screen now. I installed with "Like CD" option. Is there a way to reactivate that log in?
Thanks
Oh and Thank you for your help!
If you installed it Knoppix style or as the cd, then all you have to do is this:
Then you will be root and you can do "passwd"
This is kind of scary isn't it. I don't think it's a good idea for an install to be setup like this, but I think it's inevitalbe on the Knoppix style install. You can probably change this if you loot at /etc/profile and do a little editing.
-
Well its not Windows, but I opted for the reinstall. KDM was not loading and when I changed inittab from id:5 to id:4 only one user could log in from text mode. Than startx would bring up a really ugly gui in German. It was time to pull the plug!
This time I'm going with the Debian style install.
Now once it is up, I need to figure out the Nvidia driver thing for my Gforce4 MMX card.
Thanks
-
Senior Member
registered user
Originally Posted by
dave52355
Now once it is up, I need to figure out the Nvidia driver thing for my Gforce4 MMX card.
Thanks
This thread may help.
Similar Threads
-
By mediaparty in forum General Support
Replies: 0
Last Post: 02-14-2004, 11:36 PM
-
By lello107 in forum General Support
Replies: 4
Last Post: 11-25-2003, 01:26 AM
-
By dennison_b in forum Hdd Install / Debian / Apt
Replies: 2
Last Post: 11-07-2003, 05:04 AM
-
By TheCyberDude in forum General Support
Replies: 0
Last Post: 06-19-2003, 10:43 PM
-
By Dave_Bechtel in forum General Support
Replies: 1
Last Post: 02-13-2003, 06:45 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Cisco UCS 5108 Blade Server Chassis Enclosure 8x B200 M4 16x E5-2640v3 128gb
$599.99
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
Google Search Appliance - Dell PowerEdge R710 x2 Xeon X5690 192GB Memory 6TB HDD
$529.99
HP Proliant BL460C Gen8 Blade Server 2x 8C E5-2690 192GB Ram
$58.54
727021-B21 HP ProLiant BL460c G9(Gen9) E5 10Gb FlexibleLOM CTO Blade Server
$66.00
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
HP ProLiant BL460c G9(Gen9) 2x 10 CORE E5-2660v3 2.6GHz 128GB RAM No SSD
$222.00
DELL PowerEdge M630 Blade 2x E5-2683v3 2.0GHz =28 Cores 128GB H330 2x10Gb X520
$290.00