I had a 256M swap partition on /dev/hda1, but wanted to change it to 1G so that I can start working with remastering Knoppix.
I used cfdisk to blow away the old partition, created a new 1G (type 82) swap partition, ran "mkswap /dev/hda1" and then "swapon /dev/hda1". All worked well. The free command showed swap is active and in use.
However, now when I reboot using LiveCD, I always have to do a swapon command to get swap to start up.
Any suggestions on how to get this to be automatically started when booting Knoppix?
Thanks in advance,
Paul
WD HDD Ultrastar DC HC520 HUH721212AL4205 12TB 3.5" SAS Server Hard Disk Drive
$45.47
Western Digital WD4000FYYZ RE 4TB 7200 RPM 64MB Cache SATA 6Gb/s 3.5" Hard Drive
$28.60
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$41.80
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$44.73
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$89.99
1TB HDD/SSD 2.5" SATA Hard Drive for Laptop with Win 10/Win 11 Pro Pre-installed
$19.99
Western Digital Purple Surveillance Hard Drive 4 TB
$57.00
Seagate Exos X14 12TB SATA6Gb/s 7200RPM 3.5" Enterprise Hard Drive ST12000NM0558
$99.95
WD 16TB Elements Desktop, Certified Refurbished Hard Drive - RWDBWLG0160HBK-NESN
$209.99
HDD 3.5" SATA Hard Drive with Windows 7/Win 10 Installed Legacy
$34.19