Any clues how to get wlan-ng (prism2_cs) working in 3.3 11/19/03? I modified symlinked copies of /etc/modules.conf (to alias wlan0 prism2_cs), /etc/pcmcia/config.opts (to bind my card to prism2_cs), and /etc/pcmcia/wlan-ng.opts, so prism2_cs loads automatically. It creates wlan0, but cannot bring it up. I can assign an IP to wlan0, but its HWaddr ends up all zeros (wlan0 shows up in 'ifconfig -a', but not just plain 'ifconfig').
Everything looks good with the default orinoco_cs, except that does not support WEP on my SMC 2632W. So I am trying to get wlan-ng working, which works with WEP in SuSE 8.0 (using external pcmcia with i82365 instead of yenta_socket).
I cannot tell if the yenta_socket is the problem because if I start knoppix with nopcmcia and configure it to use i82365 instead, that fails and it uses yenta anyway. Or manually bringing up the modules in the same order as /etc/init.d/pcmcia fails when I try to modprobe or insmod i82365 (device not found).
root@tty2[knoppix]# cardmgr[1007]: socket 1: SMC 2632W 11mbps 801.11b WLAN Card
cardmgr[1007]: executing: 'modprobe prism2_cs'
cardmgr[1007]: + Note: /etc/modules.conf is more recent than /lib/modules/2.4.22
-xfs/modules.dep
init_module: prism2_cs.o: 0.2.0 Loaded
init_module: dev_info is: prism2_cs
cardmgr[1007]: executing: './wlan-ng start wlan0'
cardmgr[1007]: + /sbin/ifconfig wlan0 up
cardmgr[1007]: + SIOCSIFFLAGS: No such device
cardmgr[1007]: + /sbin/pump -i wlan0 > /dev/null
cardmgr[1007]: + Operation failed.
root@tty2[knoppix]# ifconfig -a
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:6 errors:0 dropped:0 overruns:0 frame:0
TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:300 (300.0 b) TX bytes:300 (300.0 b)
wlan0 Link encap:Ethernet HWaddr 00:00:00:00:00:00
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:3 Base address:0x100
root@tty2[knoppix]# iwconfig
lo no wireless extensions.
Warning: Driver for device wlan0 has been compiled with version 15
of Wireless Extension, while this program is using version 16.
Some things may be broken...
wlan0 IEEE 802.11-b Mode:Auto Access Point: 00:00:00:00:00:00
Encryption keyff
ASUS H110M-R Motherboard Intel 6th/7th Gen LGA1151 DDR4 Micro-ATX i/o shield
$35.69
Motherboard AM4 A520m WIFI 4 slots Ryzen Gigabyte D3SH BEST PRICE
$50.00
ASUS H170M-PLUS Motherboard M-ATX Intel H170 LGA1151 DDR4 SATA3 HDMI DVI-D VGA
$47.99
Asus H81M-C Intel LGA1150 DDR3 Desktop Motherboard MicroATX Socket H3
$23.99
MSI H81M-P33 Desktop Motherboard Intel MicroATX Socket LGA1150 USB 3.0 W/IO
$26.99
ASRock B550M Pro SE AM4 DDR4 SATA 6Gb/s 1 PCIe 4.0 x16 Micro ATX Motherboard
$84.99
Asrock Z390 Phantom Gaming 4S/AC Wifi 8th/9th Gen Intel 1151 Motherboard Bulk
$33.47
GIGABYTE GA-X99-UD4P MOTHERBOARD, M.2 SATA3, LGA2011-3, DDR4, & I/O Shield
$69.99
MSI PRO B650-P WiFi AMD AM5 DDR5 WiFi 6E ProSeries Motherboard
$112.95
Supermicro MotherBoard X11SPi-TF Xeon Single CPU Socket LGA3647 w/Heatsink
$314.99