-
Serial Kernel
I have build a 2.4.24 kernel with the serial console built-in, and have remastered my KNOPPIX CD to use isolinux. I have added "serial 1 9600" to my isolinux.cfg, and have added "console=ttyS1,9600n8" to the append line of all kernels. Also I have modified the inittab to put a serial console on ttyS0 and ttyS1. Isolinux on boot will output to serial, once the kernel is loaded I get no more output until getty is started by init and I am able to log in.
I need to be able to see what is going on during boot. Any ideas??
Thanks
Tim
Similar Threads
-
By smitstain in forum Hardware & Booting
Replies: 4
Last Post: 06-16-2005, 09:39 PM
-
By ariels in forum Hardware & Booting
Replies: 1
Last Post: 03-15-2005, 08:44 AM
-
By Aleu in forum Hardware & Booting
Replies: 4
Last Post: 12-17-2004, 05:32 AM
-
By lee in forum General Support
Replies: 0
Last Post: 11-16-2004, 10:51 AM
-
By Joe999 in forum Hdd Install / Debian / Apt
Replies: 0
Last Post: 08-14-2004, 08:32 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
DELL PowerEdge R730XD Server 2x E5-2697v4 2.3GHz =36 Cores 64GB H730 4xRJ45
$407.00
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$273.00
Colfax CX75432 4U Server 2x Xeon E5-2660 v3 NO RAM NO HDD NO GPU
$699.00
Dell Poweredge R720 2x Xeon E5-2670 v2 2.5GHz 20-Cores / 128gb / 600gb / H710
$249.99
Dell PowerEdge R420 Dual Intel Xeon E5-2440 v2 @1.90GHz 32GB RAM No HDD H710
$74.50
Dell PowerEdge R630 Server 2x E5-2650v3 2.30Ghz 20-Core 96GB 2x 300GB H330
$240.10
Dell PowerEdge R620 Server 2x E5-2660 v2 2.2GHz 20 Cores 256GB RAM 1x 480GB SSD
$139.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports
$149.00
DELL PowerEdge R930 4x E7-8880v4 2.2GHz =88 Cores 128GB H730p PCIe 2xSFP+ RJ45
$764.00