If you can boot with the regular knoppix cd, just use "dmesg"!
I have build a 2.4.24 kernel with the serial console built-in, and have remastered my KNOPPIX CD to use isolinux. I have added "serial 1 9600" to my isolinux.cfg, and have added "console=ttyS1,9600n8" to the append line of all kernels. Also I have modified the inittab to put a serial console on ttyS0 and ttyS1. Isolinux on boot will output to serial, once the kernel is loaded I get no more output until getty is started by init and I am able to log in.
I need to be able to see what is going on during boot. Any ideas??
Thanks
Tim
If you can boot with the regular knoppix cd, just use "dmesg"!
Yes I could use dmesg, but I need the capability of seeing the boot processes through the serial port. The machine that will be using this remastered version will be headless and w/o a video card.
1TB/2TB USB 3.0 Flash Drive Thumb U Disk Memory Stick Pen PC Laptop Storage lot
$580.99
Type C USB 3.0 Flash Drive Thumb Drive Memory Stick for PC Laptop 1TB 2TB lot
$73.29
512GB 1TB 2tb 4tb 256g M.2 2280 SSD SATA3 Internal Solid State Drive Lot Dogfish
$271.99
1TB HDD/SSD 2.5" SATA Hard Drive for Laptop with Win 10/Win 11 Pro Pre-installed
$28.99
WD - Blue SN580 1TB Internal SSD PCIe Gen 4 x4 NVMe
$64.99
CISCO A03-D1TBSATA 1TB 7.2K 6G 2.5INCH SATA HDD
$9.00
1/2/4TB External Hard Disk Drives High-speed Transmission Large Capacity Storage
$16.38
Samsung - 870 EVO 1TB Internal SSD SATA
$99.99
Western Digital 1TB WD Blue SA510 SATA SSD Internal 2.5ā€¯/7mm Cased - WDS100T3B0A
$79.99
1TB/2TB Lenovo USB Flash Drive Metal Memory Stick Pen Thumb Disk Storage
$16.99