Try setting the bios to "non plug and play OS".
If that doesn't work, come back.
Knoppix version 2003-06-17
P3 866MHZ
128 MB Ram
15GB HD
On board intergrated Video/Sound/NIC
Compaq DeskPro EN
Initially I completed the entire installation and then recieved the KNOPPIX HALTED meesage, remove cd and then power down. Now Im getting errors such as invalid IO or IRQ input, or cannot start KMSERVER etc, I can run this cd or the one burned at slower speeds x4 etc and install fine on other machines, just curious if there is anything I am missing here to run on this box?
Also at Initiating shutdown sequence wav I see:
*Error* Cannot initialize the agpgart module
Cannot allocate memory
INSmod i810 failed etcetc
Grazie~
Warawara
Try setting the bios to "non plug and play OS".
If that doesn't work, come back.
Thanks, I appreciate the response, I'm getting the 3.3 version atm, will attempt install again here shortly.
Vintage Altec Lansing Multimedia Computer Speakers ACS500
$78.00
Vintage IBM Model M (PN 1391401) Dated April 4, 1991 ,Bolt- Modded and restored
$145.00
Vintage NVIDIA P73 AGP 64M VGA/S-Video Graphics Card,
$15.00
Vintage IBM Thinkpad X31 Laptop 12.1" 512 MB RAM IBM Type 2884 Cord For Parts
$45.00
Vintage The Walt Disney World Explorer 25th Anniversary 1996 PC Very Clean
$14.99
Vintage 1980s Data Systems Mauals and Guides X-170 PC Microsoft MS-DOS
$34.99
Vintage ISA Adaptec AHA-1535 SCSI Controller Card
$20.00
Vintage Intel Preliminary MCS-86 User's Manual - July 1978
$29.99
Intel PODP5V83 Overdrive 486 Sealed With Manual And Tool Vintage Rare SU014 83
$149.99
Hewlett Packard HP 82240A Infrared Printer for 48GX 48SX Calculators Vintage #2
$59.99