-
So I reloaded the USB stick with a fresh install of Knoppix , reinstalled the new Wifi driver, and now Wifi IS working with no cheat code??
I haven't tested if the Wifi still works with a reboot though.
Whats happened now is the old comp I have been testing this on had a moment and wiped the USB stick.
So I reloaded the stick again but now it won't boot? Reformatted a second time and reloaded but still no go?? Boot order is still set for USB 1st.
Tried on another comp with boot order USB 1st and it didn't work on that either??
-
Ok, I have got this thing going again, but after reboot the Wifi stops working, so I need to get this cheat code working.
So im back to this step,
When I open "sudo leafpad /mnt-system/boot/syslinux/syslinux.cfg" there is nothing in there, its just an empty file??
-
Senior Member
registered user
How did you create your bootable USB stick?
What happens if you issue
Code:
find /mnt-system -iname syslinux.cfg
and
Code:
find /mnt-system -iname menu.lst
-
Those two commands didn't do anything.
Im using unetbootin to create.
-
Senior Member
registered user
You will find a file called syslinux.cfg in the root directory of your bootable USB stick. If you use Windows open this file with wordpad. If you are running Knopix use Leafpad text editor.
Search for a section with 'menu label knoppix' like the following:
Code:
label ubnentry2
menu label knoppix
kernel /boot/isolinux/linux
append initrd=/boot/isolinux/minirt.gz ramdisk_size=100000 lang=de apm=power-off nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1 tz=localtime
Move the cursor to end of the line starting with 'append' and add your cheat code there. In my case the new line looks like
Code:
append initrd=/boot/isolinux/minirt.gz ramdisk_size=100000 lang=de apm=power-off nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1 tz=localtime modprobe.blacklist=rtl8192cu
Save the file and reboot.
-
Tried that but still no go?
Code:
label ubnentry2
menu label knoppix
kernel /boot/isolinux/linux
append initrd=/boot/isolinux/minirt.gz ramdisk_size=100000 lang=en apm=power-off nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1 tz=localtime modprobe.blacklist=rtl8192cu
-
Senior Member
registered user
I thought you would choose the menu entry 'knoppix' from the menu at boot time, but if you want to use 'Default' (the first entry in the boot menu) you have to edit the 'append' line of the 'Default' section. On my system I have got
Code:
label unetbootindefault
menu label Default
kernel /ubnkern
append initrd=/ubninit ramdisk_size=100000 lang=de apm=power-off nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1 tz=localtime modprobe.blacklist=rtl8192cu
-
Yes that's got it going now.
I just use 'default' so I only have to hit enter to boot.
Ahh now I see now how it works, so if I want to use Knoppix64 in the 'boot menu' at start up with Wifi, I would have to add it to that line as well.
Thanks so much klaus2008 for your help to get this working.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Cisco UCS B200 M4 Blade Module 2x Xeon E5-2680 v3 12-Core NO RAM NO HDD
$39.99
Sun Microsystems Blade 100 Workstation UltraSPARC-IIe 500MHz 256MB Server No HDD
$95.00
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
HP Proliant BL460C Gen8 Blade Server 2x 8C E5-2690 192GB Ram
$58.15
Dell PowerEdge FC630 Xeon E5-2660 v4 256 GB DDR4 1U Server No Drives/No OS B9
$424.99
Dell PowerEdge M620 Blade Server 2x 10C E5-2690v2 64GB Ram 2x 600GB 10k HDD
$125.00
🔥 World Of Warcraft Server Blade 🔥
$944.86
HP P17342-B21 M750 E2286M CTO BLADE SERVER
$269.95
DELL PowerEdge M630 Blade 2x E5-2687Wv3 3.1GHz =20 Cores 32GB H330 2x10Gb X520
$193.00