Try some cheatcodes.
Example at the Boot prompt: knoppix screen=1280x1024 xmodule=ati vsync=60
You have to choose the cheatcodes according to your hardware.
I downloaded knoppix, burned but when I boot up, it shows the command prompt and the thing that says press enter to load knoppix, I press that and the screen goes blank did I do something wrong (btw I'm on a desktop)
Try some cheatcodes.
Example at the Boot prompt: knoppix screen=1280x1024 xmodule=ati vsync=60
You have to choose the cheatcodes according to your hardware.
So if i have the nvidia GeForce2 MX 200, I would type knoppix screen=800x600 xmodule=nvidia vsync=60 ???
I think it's called xmodule=nv. BTW it was just an example, you probably don't need vsync=60.
You could start with: knoppix failsafe just to see if it'll boot. Then start experimenting with the right cheatcodes for your computer. Could be that you need framebuffering which would then be: fb1280x1024 or fb1024x768 or fb800x600, or try vga=normal.
I tried : knoppix failsafe , it didn't work, what should I do ?
Hmm, you could have a bad burn. Try knoppix testcd to see if it reports any errors.
If you still have the iso file you could check the md5sum http://www.linuxiso.org/viewdoc.php/verifyiso.html
the thing is I did knoppix testcd, and ithe screen turned blank, does this mean I burned or downloaded it bad ?
Not necessarily, but it might so you could also check the md5sum and burn at a slowish speed, say 4x.
You still need to find the right set of cheatcodes if it isn't the cd, though it might take a while trying out different combinations.
how would you do the thing with the md5sum?
How about following the link for md5sum I posted earlier.
I hope you also noticed that the word "cheatcodes" in my first post is a link.
Cisco Catalyst C9300-24UX-A 24 Port 10G/mGig UPOE Network Switch + NM-8X Module
$579.97
Cisco Nexus N9K-C93180YC-FX 48 Port Network Switch
$910.00
Cisco Meraki MX250-HW Cloud Managed Security Appliance - UNCLAIMED
$350.00
Cisco FPR1010-NGFW-K9 FirePOWER Security Appliance **CISCO EXCESS**
$339.00
Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850
$30.99
CISCO SFP-10G-LR SFP TRANSCEIVER MODULE GBIC 10G 10GB SFP - 1 Year Warranty
$39.99
Cisco C3850-NM-4-10G 4 Port Network Exp.Module for 3850
$134.90
Genuine Cisco SFP-10G-SR Transceiver Module (10-2415-03)
$5.85
Cisco Catalyst 3850 48-Port PoE+ Gigabyte Ethernet Network Switch C3850-NM-4-1G
$119.99
Cisco SG300-52-Port Gigabit Managed Rack Mountable Network Switch
$44.95