Results 1 to 2 of 2

Thread: Stepmania on Knoppix 5.01 DVD (CONFIG_X86_CMPXCHG in kernel)

  1. #1
    Junior Member
    Join Date
    Jun 2006
    Posts
    2

    Stepmania on Knoppix 5.01 DVD (CONFIG_X86_CMPXCHG in kernel)

    Okay... Okay... Okay.... I'm forced to make an account.

    I figured out where to get the drivers I need to enable "Direct Rendering"....but..... everytime I try to install them(dripkg), the makefiles complain that CONFIG_X86_CMPXCHG is not enabled in the kernel.

    How do I patch/upgrade my kernel to enable CONFIG_X86_CMPXCHG???

    I tried this --> http://www.ussg.iu.edu/hypermail/lin...10.3/1505.html

    Even after changing all "linux-2.6" to "linux-2.6.17" that Knoppix 5.01 DVD comes with..... doing...

    cd /usr/src
    patch -p0 < MyCutAndPasteFromURLKernelPatch.txt

    I get a bunch of malformed errors. Now, I don't think that patch is correct and I don't wanna mess up my knoppix install(though, it's pretty standard... so I could just wipe it out and start over I guess). I've read a bunch of tutorials online about patching/upgrading kernels, but I'm thinking Knoppix's kernel is too customized for me to download a generic kernel and just install it. Also, I question if I even need to upgrade/patch the kernel... because make menuconfig --> search... shows me that there are CONFIG_X86_CMPXCHG & CONFIG_X86_CMPXCHG64 already present...somewhere, in some file...marked as "=n". How do I change them to "=y"?
    At the end of the day, I want glxinfo to tell me "Direct rendering: Yes". And I'm sure I'll get that once I get this dripkg makefile to complete successfully. I already suspect that my patching attempts have made a bunch of unfinished changes that'll end up forcing me to re-install knoppix from scratch before this is all over.

    BTW, This is a Toshiba Satellite A105-S4004 notebook.
    The command "dmesg | grep agp" shows Intel 945GM Chipset.

    Thanks,

    UPDATE:

    I see Intel 945GM graphics driver for Linux here:
    http://downloadfinder.intel.com/scri...9&submit=Go%21

    I see DRI's home page listing Intel's i945GM compatibility as "supported" here:
    http://dri.freedesktop.org/wiki/Inte...HardwareVendor

    ....but, still haven't figured out what to do with all this....

  2. #2
    Junior Member
    Join Date
    Jun 2006
    Posts
    2
    SOLVED!!!

    1) Using the fresh install of Knoppix 5.01,
    2) edit /etc/X11/xorg.conf to use i810 driver
    3)install the following enabled Direct Rendering. (glxinfo | grep render)

    mesa-common-dev (= 6.5.0.cvs.20060524-1)
    libgl1-mesa-glx (= 6.5.0.cvs.20060524-1)
    libgl1-mesa-dri (= 6.5.0.cvs.20060524-1)
    libgl1-mesa-dev (6.5.0.cvs.20060524-1)

    EDIT#1: Turns out this brakes XMMS with BadMatch Invalid Parameter.... but whatever, there are other Media players for linux that work fine.
    EDIT#2 In terminal type "export XLIB_SKIP_ARGB_VISUALS=1" then type "xmms" and it'll start up. Same thing for Audacity.
    EDIT#3 add this to the bottom of /etc/profile and you won't have to type it everytime you need it.

Similar Threads

  1. Trouble with knoppix-kernel.patch <-> any Kernel
    By -Hawkeye- in forum Customising & Remastering
    Replies: 1
    Last Post: 12-07-2005, 11:50 AM
  2. knoppix 3.8.1 (kernel 2.6.11):new custom kernel without ub ?
    By theh in forum Hdd Install / Debian / Apt
    Replies: 5
    Last Post: 10-31-2005, 11:03 AM
  3. How do I install kernel source and config/compile kernel??
    By cfish in forum Hdd Install / Debian / Apt
    Replies: 0
    Last Post: 04-25-2005, 07:31 AM
  4. Kernel compile problem - first Knoppix kernel compile
    By Nigel_Tufnel in forum Hdd Install / Debian / Apt
    Replies: 2
    Last Post: 10-20-2003, 01:09 PM
  5. Modified kernel results in Kernel Panic - No init found.
    By tji in forum Customising & Remastering
    Replies: 4
    Last Post: 06-12-2003, 06:40 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


HP ProLiant MicroServer Gen8 G8 G2020T 8GB RAM 4x 1TB HDD 4x 3.5

HP ProLiant MicroServer Gen8 G8 G2020T 8GB RAM 4x 1TB HDD 4x 3.5" 712318-421

$269.99



1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE picture

1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE

$273.00



1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports picture

1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports

$149.00



Supermicro 1U Server X9DRW-3LN4F+ 2x E5-2680 2.7ghz / 128gb / 8xTrays / 2x 700w picture

Supermicro 1U Server X9DRW-3LN4F+ 2x E5-2680 2.7ghz / 128gb / 8xTrays / 2x 700w

$229.99



HP ProLiant MicroServer Gen8 | Intel XEON E3-1220L V2 | 8GB RAM | NO HDD | 4 BAY picture

HP ProLiant MicroServer Gen8 | Intel XEON E3-1220L V2 | 8GB RAM | NO HDD | 4 BAY

$249.99



SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount picture

SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount

$202.49



DATTO-1000 Mini PC Micro Server 8GB RAM picture

DATTO-1000 Mini PC Micro Server 8GB RAM

$67.48



HP HPE Microserver Gen 7 8 9 iLO 2/3/4/5Advanced License Lifetime Key| FAST SHIP picture

HP HPE Microserver Gen 7 8 9 iLO 2/3/4/5Advanced License Lifetime Key| FAST SHIP

$10.00



2U 12 Bay SAS3 SuperMicro Server 6028U-TR4T+ W/ X10DRU-i+ Barebone 12 Caddy RAIL picture

2U 12 Bay SAS3 SuperMicro Server 6028U-TR4T+ W/ X10DRU-i+ Barebone 12 Caddy RAIL

$299.00



1U 20

1U 20" Short Depth Server Firewall PFSense X11SSH-F Xeon 3.5Ghz 32GB RAM NVME

$247.00