Hi there,
I recently installed 3.4 (tried beginner and debian style) on my HD (Dell Inspiron 8100) and have some problems:
1) With kernel 2.6.5, I get two network adaptors, eth0 and eth1 but with kernel 2.4 just eth0. With kernel 2.6 I *sometimes* get eth1 working. With 2.4, eth0 just works fine. BTW, I did not know that I have two adaptors Knoppix from CD gives me just eth0.
2) On reboot with kernel 2.6.5, my machine hangs after "Preparing for reboot..." but kernel 2.4 reboots without problems.
3) I have an external firewire HD, which always seems to be recognized, but on most boots I have to do a modprobe sbp2 and mount myself. Again, with kernel 2.4 there does not seem to be any problems.
Any further information needed?
Thanks,
Ingo
HP ProLiant DL380 Gen9 8SFF Server - E5-2698 v3 - 32Cores - 128GB Ram - 1TB HDD
$299.00
HP ProLiant DL380 Gen9 Server 1x Xeon E5-2620V3 2.40 GHz 16 GB RAM No OS No HDD
$114.95
IBM Power S822 8284-22A 12SFF Power8 3.89GHz 6Core 64GB RAM No HDD Server System
$359.99
Lenovo SR530 Server (Intel Xeon Silver 4110) (3x 800GB SSD) (NO OS) (48GB RAM)
$599.00
Dell PowerEdge R620 Dual Intel Xeon E5-2697 v2 @2.70GHz 128GB RAM No HDD S110
$144.50
Dell PowerEdge R620 Server 2x E5-2660 v2 2.2GHz 20 Cores 256GB RAM 1x 480GB SSD
$144.99
Dell PowerEdge R430 - E5-2640 v3 2.60GHz 16GB RAM - NO HDDs
$112.49
HYVE ZEUS V1 1U BAREBONE SERVER W/ X9DRD-LF-TW008 2x HS 1x PSU NO RAM HDD RISER
$114.00
CTO Dell PowerEdge R630 Server, 2x Xeon E5-2620V4, 64GB- 512GB RAM, 480GB SSDs
$380.00
Lenovo ThinkSystem ST50 V2 Tower Server Intel Xeon E-2324G 3.10 GHz 16 GB RAM
$774.99