-
new Kanotix version 06-2004
Hi all:
A new version of Kanotix is out.
DL at:
ftp://debian.tu-bs.de/kanotix/KANOTI...ER-06-2004.iso
".. improved hardware detection Many new WLAN drivers including ACX100 (PCMCIA), Centrino, and Ndiswrapper to use Windows drivers. Hard disk install now uses GRUB bootloader as default. Latest Debian/Sid for the rest as usual. . ."
Bob
-
Junior Member
registered user
KANOTIX: Captive NTFS, GRUB, 10-minute DEBIAN HD Install
Apart from having Kernel 2.6.6 and Captive NTFS support, and a full Knoppix desktop, and more besides, KANOTIX also provides a ten-minute HD installation of clean DEBIAN.
To summarize KANOTIX info:
KANOTIX BUG HUNTER 06/2004 RELEASE: This is a Linux Live CD based on KNOPPIX technology using mostly pure Debian/sid, which includes Kernel 2.6.6, ACPI and DMA enabled by default (can be disabled with acpi=off respectively nodma), i586 optimization, AVM Fritz!Card DSL support, Eagle USB DSL support, KDE 3.2.2, OpenOffice 1.1.1, Captive 1.1.5 (NTFS Read-Write), ALSA (included in kernel), GRUB boot loader for CD start - ideal for rescue in command line mode, Memtest86+ - Advanced Memory Diagnostic Tool in the extra menu of the boot loader. Note the Captuve-NTFS and GRUB boot loader features. By using GRUB, I experience no live boot problems with otherwise difficult or impossible DVD/CD-ROM drives.
KANOTIX notes: "Don't try to write to NTFS partitions using the standard NTFS driver included with the kernel, as its support for writing is very lacking, thus it could destroy the partition and the data in it. There is a new Captive NTFS driver that does a better job at writing to NTFS, so use it instead. For FAT partitions you can enable write-access with the context menu (right mouse button). You may not have the rights to modify Linux partitions, use the root mode in konsole if needed. Some links are not working in the menu - that is not my fault - the packages from Debian/sid are very new and may have some little bugs, but you can always use new releases. If you find other bugs feel free to post them in the forum."
Information: http://kanotix.com/info/index.php
download: ftp://debian.tu-bs.de/kanotix/
download: http://debian.tu-bs.de/kanotix/
download: ftp://ftp.fbihome.de/linux/kanotix/KANOTIX-current/
-
Senior Member
registered user
It is also worthy to note that Kanotix Bug Hunter 6 does NOT have an SMP kernel.
The GRUB menu can also be used to boot existing Linux hdd installs.
-
Senior Member
registered user
Anyone have experience with grub? I've been using lilo in the mbr for my KNOPPIX hdinstall dual-boot PCs lately. How's using grub in KANOTIX different?
TIA,
AJG
-
Senior Member
registered user
![Quote](images/misc/quote_icon.png)
Originally Posted by
A. Jorge Garcia
Anyone have experience with grub? I've been using lilo in the mbr for my KNOPPIX hdinstall dual-boot PCs lately. How's using grub in KANOTIX different?
TIA,
AJG
grub kicks butt man!
Wanna try it out for yourself?
apt-get install grub
update-grub
reboot (just to see it in action)
You'll just have to use it a bit to see why it's better. You won't go back to lilo.
-
Senior Member
registered user
im a lilo oldschool myself but the way grub has been used in kanotix is exceptional.... you can choose resolution..language and 1001 other cheatcodes straight from a GUI type ....
you gotta see it.... IMHO to appreciate it.
-
Senior Member
registered user
I am a LILOlady myself...fear grub as fear of unknown. Lilo is the only boot manager I have ever used. Would like to triple boot BH6 with my existing (and much much much LOVED main install of BH4) and the much needed W98SE for graphics for work. Anybody want to give a grub newbie pointers on how not to blow it on a harddrive install of BH6 (while keeping BH4 as default) and 98. The 98 and fat32 covers 3 partitions on primary disk. Knoppix and BH4 cover 3 partitions on secondary hard disk, each have own partition and they share the linux swap partition of that disk. I would overwrite the Knoppix with BH6. Currently Lilo manages BH4 and 98SE, knoppix I access with a floppy (as my attempts as to adding it to the boot choices were an abysmal failure
)
-
Senior Member
registered user
Go ahead and install Kanotix. GRUB will automatically add all kernels (and windows partitions) it finds to /boot/grub/menu.lst.
In the unlikely event that you can't get GRUB to work corerectly you can use the Kanotix cd to boot any of your partitions too. ![Smile](images/smilies/icon_smile.gif)
Please join us in #kanotix
Here is my menu.lst
Code:
## ## End Default Options ##
title Debian GNU/Linux, kernel
root (hd0,0)
kernel /boot/vmlinuz root=/dev/hda1 ro
savedefault
boot
title Debian GNU/Linux, kernel (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz root=/dev/hda1 ro single
savedefault
boot
title Debian GNU/Linux, kernel 2.6.7-kanotix
root (hd0,0)
kernel /boot/vmlinuz-2.6.7-kanotix root=/dev/hda1 ro
savedefault
boot
title Debian GNU/Linux, kernel 2.6.7-kanotix (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.7-kanotix root=/dev/hda1 ro single
savedefault
boot
title Debian GNU/Linux, kernel 2.6.7
root (hd0,0)
kernel /boot/vmlinuz-2.6.7 root=/dev/hda1 ro
savedefault
boot
title Debian GNU/Linux, kernel 2.6.7 (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.7 root=/dev/hda1 ro single
savedefault
boot
title Debian GNU/Linux, kernel 2.4.26-1-k7
root (hd0,0)
kernel /boot/vmlinuz-2.4.26-1-k7 root=/dev/hda1 ro
initrd /boot/initrd.img-2.4.26-1-k7
savedefault
boot
title Debian GNU/Linux, kernel 2.4.26-1-k7 (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.4.26-1-k7 root=/dev/hda1 ro single
initrd /boot/initrd.img-2.4.26-1-k7
savedefault
boot
### END DEBIAN AUTOMAGIC KERNELS LIST
title BH06
root (hd0,9)
kernel /boot/vmlinuz-2.6.6-kanotix-2 root=/dev/hda10 ro
savedefault
-
![Quote](images/misc/quote_icon.png)
Originally Posted by
mzilikazi
In the unlikely event that you can't get GRUB to work corerectly you can use the Kanotix cd to boot any of your partitions too.
With LILO, booting an installed distro from the CD is a very simple matter, and as a result I haven't made a boot floppy in a long time. At the CD boot prompt:
vmlinuz root=/dev/hda8 noinitrd ro
and it hits the CD for a couple of seconds so it can find the root directory, and then boots from the hard drive as normal. (Depending on the distro, the kernel may be named vmlinuz, linux, knoppix. Use what you need.) I can do this with GRUB, but it involves editing the menu and is much more complicated.
If there is a simple way to boot a GRUB CD, I would like to know what it is. Thanks.
-
Senior Member
registered user
Similar Threads
-
By mzilikazi in forum The Lounge
Replies: 1
Last Post: 08-06-2004, 02:10 PM
-
By hadar in forum Hardware & Booting
Replies: 3
Last Post: 06-07-2004, 06:39 AM
-
By horo in forum Customising & Remastering
Replies: 2
Last Post: 03-22-2004, 04:01 PM
-
By spade in forum Hdd Install / Debian / Apt
Replies: 0
Last Post: 02-11-2004, 12:54 AM
-
By bongski55 in forum General Support
Replies: 23
Last Post: 08-27-2003, 01:12 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
![** Intel i3 10100F CPU Processor - USED ** picture](/store/img/g/068AAOSwcrJmXyYd/s-l225/-Intel-i3-10100F-CPU-Processor-USED-.jpg)
** Intel i3 10100F CPU Processor - USED **
$47.99
![Intel - Core i9-14900K 14th Gen 24-Core 32-Thread - 4.4GHz (6.0GHz Turbo) Soc... picture](/store/img/g/YFUAAOSwTDplMDa3/s-l225/Intel-Core-i9-14900K-14th-Gen-24-Core-32-Thread-4-.jpg)
Intel - Core i9-14900K 14th Gen 24-Core 32-Thread - 4.4GHz (6.0GHz Turbo) Soc...
$548.99
![AMD Ryzen 9 7950X3D Gaming Processor - 16 Core And 32 Threads - 5.70 GHz Max Boo picture](/store/img/g/3eoAAOSwvehmVym9/s-l225/AMD-Ryzen-9-7950X3D-Gaming-Processor-16-Core-And-3.jpg)
AMD Ryzen 9 7950X3D Gaming Processor - 16 Core And 32 Threads - 5.70 GHz Max Boo
$449.99
![Intel Xeon E5-2680 v4 SR2N7 2.40GHz 35MB 14-Core LGA2011-3 CPU Processor picture](/store/img/g/bVoAAOSwsZ9lxn1h/s-l225/Intel-Xeon-E5-2680-v4-SR2N7-2-40GHz-35MB-14-Core-L.jpg)
Intel Xeon E5-2680 v4 SR2N7 2.40GHz 35MB 14-Core LGA2011-3 CPU Processor
$14.99
![Intel Core i5 6400 2.7Ghz LGA 1151 QUAD CORE PROCESSOR picture](/store/img/g/9~cAAOSwfSJmVi7G/s-l225/Intel-Core-i5-6400-2-7Ghz-LGA-1151-QUAD-CORE-PROCE.jpg)
Intel Core i5 6400 2.7Ghz LGA 1151 QUAD CORE PROCESSOR
$24.99
![Intel Core i5-2400 Processor (3.1 GHz, 4 Cores, LGA 1155) - SR00Q picture](/store/img/g/PJcAAOSwr1hmbMw-/s-l225/Intel-Core-i5-2400-Processor-3-1-GHz-4-Cores-LGA-1.jpg)
Intel Core i5-2400 Processor (3.1 GHz, 4 Cores, LGA 1155) - SR00Q
$5.00
![Intel - Core i5-14600K 14th Gen 14-Core 20-Thread - 4.0GHz (5.3GHz Turbo) Soc... picture](/store/img/g/2f8AAOSw7ltlMDW2/s-l225/Intel-Core-i5-14600K-14th-Gen-14-Core-20-Thread-4-.jpg)
Intel - Core i5-14600K 14th Gen 14-Core 20-Thread - 4.0GHz (5.3GHz Turbo) Soc...
$339.99
![Intel Core i7-7700 3.60GHz Quad-Core CPU picture](/store/img/g/vuMAAOSwCLhl-j-G/s-l225/Intel-Core-i7-7700-3-60GHz-Quad-Core-CPU.jpg)
Intel Core i7-7700 3.60GHz Quad-Core CPU
$38.52
![INTEL CORE I7-9700K PROCESSOR | 3.60GHZ | SRG15 picture](/store/img/g/QKIAAOSwrHFmadzW/s-l225/INTEL-CORE-I7-9700K-PROCESSOR-3-60GHZ-SRG15.jpg)
INTEL CORE I7-9700K PROCESSOR | 3.60GHZ | SRG15
$159.99
![Intel Xeon E5-2697 V4 2.30 GHz 18C 2011-3 2400MHz 45MB 145W SR2JV CPU Processor picture](/store/img/g/CbkAAOSwwRxmavZk/s-l225/Intel-Xeon-E5-2697-V4-2-30-GHz-18C-2011-3-2400MHz-.jpg)
Intel Xeon E5-2697 V4 2.30 GHz 18C 2011-3 2400MHz 45MB 145W SR2JV CPU Processor
$45.00