Fat32 is a fine system for PH.
Knoppix however locks a drive when it boots from it.
Hi!
I am using Knoppix 3.7. If I try to boot from hd with knoppix fromhd=/dev/hda1 and home=scan (or home=/dev/hda1/knoppix.img or home=/mnt/hda1), I cannot mount my home directory.
I get a message that /dev/hda1 is already mounted read only, a warning that fat32 is not a good file system for a home directory and the mount failed.
On a second system where /dev/hda1 is fat16 partion, I get also a message that /dev/hda1 is already mounted read only, but afterwards everything works fine.
Any solution available for that problem? Does anybody knows where to patch that stupid fat32 warning? I suspect around there is the problem.
Best regards,
Andreas
Fat32 is a fine system for PH.
Knoppix however locks a drive when it boots from it.
>Knoppix however locks a drive when it boots from it.
It seems to release the lock for the mounting of the loopback device knoppix.img, if the file system is FAT16. But it don't release the lock, if the file system is FAT32. Any clue why?
knoppix fromhd=/dev/hda1 and home=/mnt/hda1 works perfectly with FAT16 on /dev/hda1.
Regards,
Frank
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$179.99
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$55.45
OWC Guardian Maximus Raid Enclosure SATA Hard Drive FireWire
$36.99
0XYHWN Dell PERC H730P PCIe 3.0 SAS 12GB RAID CONTROLLER
$65.00
Inspur LSI YZCA-00424-101 Raid Card 12Gbps HBA Controller Low Profile 9300-8i IT
$15.98
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
Inspur LSI SAS3008 12Gbps SAS HBA RAID Controller Card P/N:YZCA-00424-101 Tested
$24.99
Dell 7H4CN PERC H730P Raid Controller Mini Mono12GBPS 2GB NV Cache
$44.99
ORICO 5 Bay Raid USB3.0 to SATA External Hard Drive Enclosure for 3.5'' HDD LOT
$175.99
Adaptec - ASR-7805 6Gbs SAS- PCI EXPRESS 3.0 X8 -1GB Cache RAID Controller Card
$34.98