-
Junior Member
registered user
Questions on setting up a Persistant Hard drive image
Now that I've gotten Knoppix to work and connect to the net I need to do a couple of other things to finish setting up for regular use. I am using Knoppix version 4.0.2. First off, I have available on my hard drive a FAT formatted 10GB partition that can be dedicated to Knoppix/Linux use. Since I would prefer to free up my CD drive I need to transfer the Knoppix image to that hard drive partition and use the boot time cheat code. Am I correct in thinking that this should be done before I set up the persistant disc image/home directory with the persistant image using only the space remaining after transferring the Knoppix image? How to best go about this? Use a single partition or divide it into two? Second, when booting the system should the cheat codes for FromHD and Home=scan be entered separately or combined and if combined what would be the correct format?
Thanks,
Alice R.
-
Senior Member
registered user
Re: Questions on setting up a Persistant Hard drive image
To create a persistant image use the 'tohd' cheatcode, and then the 'fromhd' one. To have the remaining hd space avaible for persistent home (or other data) you have to create a separate partition because knoppix mount in read_only mode the which one that contain knoppix loop image.
Cheatcodes have to be typed in a way like this **knoppix fromhd=/dev/hda1 config=scan lang=en** therefore separatly.
-
Junior Member
registered user
Persistant Image success...
Partly in the interest of keeping things simple and because a friend has given me a stand alone CD burner thus making freeing up the CD drive a moot point I've successfully run the mkimage script and am kind of glad I didn't try to divide that 10GB partition that I set aside for it - The image as it stands now is well over 4GB and will grow as I customize and add things to the basic Knoppix setup - better some growing room! Thanks to all who offered advice and answers when I needed them.
Similar Threads
-
By johnmd in forum Tips and Tricks
Replies: 3
Last Post: 12-05-2010, 04:38 PM
-
By BrianC in forum General Support
Replies: 11
Last Post: 12-13-2005, 08:28 PM
-
By rstoeck in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 09-17-2004, 05:49 AM
-
By punkass in forum General Support
Replies: 2
Last Post: 05-08-2004, 05:20 PM
-
By bruceg in forum Hardware & Booting
Replies: 2
Last Post: 05-06-2004, 03:51 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
HyperX FURY RAM DDR4 16GB 8GB 32GB 4GB 3200 2666 2400 2133 Desktop Memory DIMM
$9.64
Samsung 16GB (4x4GB) 1Rx8 PC3-12800U 1600Mhz DDR3 RAM Memory M378B5273DH0-CK0
$14.00
Team T-FORCE VULCAN Z 32GB (2 x 16GB) PC RAM DDR4 3200 (PC4 25600) Memory
$54.99
HyperX FURY DDR3 8GB 16GB 32GB 1600 MHz PC3-12800 Desktop RAM Memory DIMM 240pin
$15.90
Crucial DDR3L 16GB 1600 2x 8GB PC3-12800 Laptop SODIMM Memory RAM PC3 16G DDR3
$13.50
32GB ECC DDR3 RAM 2x16GB PC3L-12800R Desktop/Server Memory
$11.99
A-Tech 8GB PC3-12800 Desktop DDR3 1600 MHz Non ECC 240-Pin DIMM Memory RAM 1x 8G
$13.99
MTA4ATF51264HZ-2G6E1 GENUINE MICRON LAPTOP MEMORY 4GB DDR4 PC4-2666V (CA610)
$1500.00
Lot Of 10 Mixed Samsung 16GB 2Rx4 PC4-2133P RDIMM DDR4-17000 ECC Server Memory
$149.99