Results 1 to 4 of 4

Thread: ISP refuses to provide support for LINUX

  1. #1
    Junior Member
    Join Date
    Mar 2006
    Posts
    1

    ISP refuses to provide support for LINUX

    Hi

    Appreciate it if somebody could translate the below into linux insturctions for me. i have tried a few things on my own but am getting stuck as kppp requires a username and password which I don't have.


    "Your phone has been setup and the lines for your internet connection have been patched in.

    Please configure your PC as follows,


    Plug the network cable into the socket on the wall by the telephone plug.

    Plug the other end into your network card in the pc and a link light (if fitted) should come on



    Right click on ‘my network places’

    Then click on properties

    Then right click on ‘local area connection’

    Then click on properties

    Highlight ‘internet protocol(TCP/IP)

    And click on properties

    Select use the following IP address



    And add the following IP Address



    IP address: 192.168.0.41

    Subnet mask:255.255.255.0

    Gateway: 192.168.0.253

    DNS1 196.25.255.34

    DNS2 196.25.255.3


    Any problems give us a call


    Dylan"

  2. #2
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441
    See answer #3.
    ---
    Verifying of md5 checksum and burning a CD at slow speed are important.

  3. #3
    Senior Member registered user
    Join Date
    Mar 2004
    Posts
    1,516
    KPPP wont be needed on LAN.
    just go trough netcardconfig and ask again if you have trouble.

  4. #4
    Junior Member
    Join Date
    Mar 2006
    Posts
    2
    at the command line.......
    # /sbin/ifconfig eth0 192.168.0.41 netmask 255.255.255.0 broadcast 192.168.0.255
    that fixes the ip address, now route....

    # /sbin/route add default gw 192.168.0.253

    and now your dns..

    edit /etc/resolv.conf should allready have some ip addresses but should look like this...

    ########
    nameserver 196.25.255.34
    nameserver 196.25.255.3
    ########

    should be able to
    # ping yahoo.com

    if not try to ping your gateway

    # ping 192.168.0.253
    if that works you need to talk to your admin again

    by the way i think those name server addresses are wrong.. you cannot use 255 as an address
    its for broadcast only...
    there are gui's for this but the shell will sometimes tell you more.
    hope it helps.

Similar Threads

  1. Can anyone provide me some info on remastering DVD?
    By dtzxdtzx1 in forum Customising & Remastering
    Replies: 4
    Last Post: 07-20-2007, 03:45 PM
  2. Knoppix 5: Linux kernel does not support PPPoE?
    By wosto in forum Hdd Install / Debian / Apt
    Replies: 0
    Last Post: 04-04-2006, 09:23 AM
  3. Anyone know how to add linux-binary support to FreeSBIE 1.1?
    By your_breakfast in forum Customising & Remastering
    Replies: 0
    Last Post: 02-13-2005, 11:29 AM
  4. Can anyone provide me a floppy-image for V3.6?
    By qeldroma in forum General Support
    Replies: 1
    Last Post: 09-08-2004, 01:34 PM
  5. Can anyone provide me a floppy-image for V3.6?
    By qeldroma in forum Laptops
    Replies: 0
    Last Post: 09-07-2004, 10:52 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Cisco Nexus 96-Port 10G SFP+ Switch N9K-93128TX w/ 9K-M12PQ 12-Port 40G QSFP picture

Cisco Nexus 96-Port 10G SFP+ Switch N9K-93128TX w/ 9K-M12PQ 12-Port 40G QSFP

$149.99



Cisco Catalyst C9300-24UX-A 24 UPOE Switch 90 Day Warranty picture

Cisco Catalyst C9300-24UX-A 24 UPOE Switch 90 Day Warranty

$320.00



LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module picture

LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module

$95.00



Cisco IE-1000-8P2S-LM Industrial Ethernet Switch New Sealed picture

Cisco IE-1000-8P2S-LM Industrial Ethernet Switch New Sealed

$1100.57



Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03  picture

Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03

$8.00



Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850 picture

Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850

$32.90



Cisco C3850-NM-4-10G 4 Port Network Exp.Module for 3850 picture

Cisco C3850-NM-4-10G 4 Port Network Exp.Module for 3850

$148.99



C9300-NM-8X CISCO C9300 Series 8 x 10GE Network Module for Catalyst 9300 Switch picture

C9300-NM-8X CISCO C9300 Series 8 x 10GE Network Module for Catalyst 9300 Switch

$299.97



Cisco Catalyst C9300-24UX-A 24 Port 10G/mGig Copper UPOE Network Switch picture

Cisco Catalyst C9300-24UX-A 24 Port 10G/mGig Copper UPOE Network Switch

$375.00



Cisco Catalyst 3650 WS-C3650-48PS-S 48-Port Gigabit Managed PoE+ Ethernet CB-101 picture

Cisco Catalyst 3650 WS-C3650-48PS-S 48-Port Gigabit Managed PoE+ Ethernet CB-101

$62.86