nevermind, recopied at a slower burn rate as per suggestions elsewhere on the forum. allles gut.
So I've decided to take the initial plunge into Linux. Downloaded Knoppix Live CD and after some trial and error finaly got a bootable CD burned. Thing started nicely then I got messages
su: Module is unknown
INIT: ID "1" respawning too fast; disabled for 5 minutes
both lines repeat several times with the INIT: ID going through "1" - "10" although not nescessarily in numerical sequence.
I have no clue what's happening other than that the install is hanging up. Is this bad media or a hardware issue? Any ideas appreciated.
nevermind, recopied at a slower burn rate as per suggestions elsewhere on the forum. allles gut.
Kslip, great that you found answer yourself. searching this forum WILL answer most questions.
keep asking as other questions pop up and sorry I missed this yesterday
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
Cisco UCS B200 M4 Blade Module 2x Xeon E5-2680 v3 12-Core NO RAM NO HDD
$39.99
Dell PowerEdge M630 Blade Server-- No Proc- No Memory - No Drives- CTO Heatsinks
$75.00
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
HP Proliant BL460C Gen8 Blade Server 2x 8C E5-2690 192GB Ram
$58.15
Google Search Appliance - Dell PowerEdge R710 x2 Xeon X5690 192GB Memory 6TB HDD
$529.99
🔥 World Of Warcraft Server Blade 🔥
$944.86
Dell PowerEdge M520 Blade Server Xeon E5-2403 NO HDD NO RAM
$45.00
Dell PowerEdge M640 Barebone Server Blade No Hard Drive Trays
$499.00
DELL PowerEdge M630 Blade 2x E5-2697v4 2.3GHz =36 Cores 128GB H330 2x10Gb X520
$351.00