While using knoppix 7.0.2, after going into "suspend" mode my system is back as it was before except for the network connectiion to the router. This is the error message I am getting when I try to get a new (or activate my old?) DHCP connection:
~Code:$ sudo netcardconfig eth0 Sending DHCP broadcast from device eth0Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0/00:23:8b:98:6a:64 Sending on LPF/eth0/00:23:8b:98:6a:64 Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 19 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 No DHCPOFFERS received. Unable to obtain a lease on first try. Exiting. Failed to bring up eth0.
How can I fix that?
~
thanks
lbrtchx
Last edited by Albretch; 08-01-2012 at 04:09 PM.
DELL PowerEdge R730XD Server 2x E5-2697v4 2.3GHz =36 Cores 64GB H730 4xRJ45
$407.00
Dell Poweredge R630 2x Xeon E5-2680 v4 2.4ghz 28-Cores / 128gb / H330 / 2x 1TB
$334.99
DELL PowerEdge R630 8SFF Server 2x E5-2650v4 2.2GHz =24 Cores 32GB H730 4xRJ45
$240.00
DELL PowerEdge R730 Server 2x E5-2690v4 2.6GHz =28 Cores 32GB H730 4xRJ45
$333.00
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R620 Server 2x E5-2660 v2 2.2GHz 20 Cores 256GB RAM 1x 480GB SSD
$139.99
Dell PowerEdge R710 2.5" 2U Server 2x X5670 2.93GHZ 12-Core 128gb 2x 1TB SAS
$114.99
Cisco UCS C220 M3 1U 2x 6-Core Xeon E5-2620 2.0GHz / 64GB RAM / No HDD
$89.99
Dell PowerEdge R630 Server 2x E5-2680 V3 =24 Cores | 128GB | H730 | 2x 600GB SAS
$464.99
HP Proliant DL380 G9 2x E5-2650 V3 2.3Ghz 20-Cores / 32GB / P440ar / 2x 750w
$99.99