-
Junior Member
registered user
Possible 9-24 ISO size problem
Hey there, I am having trouble with the 9-24EN ISO in that I have tried burning it to 2 different CD-RW discs with no success. Some background:
-I use Linux and cdrecord to burn
-I have burned many Knoppix ISOs before
-I have been able to burn Knoppix to a CD-RW once before
When I do cdrecord it doesnt report any errors. The disc will actually boot, but will die when I try to use the network config tool. I tried to do an md5sum to both copies and after a long time got Input/Output errors, whereas a good CD returns the MD5.
My theory is that since previous releases were slightly smaller, perhaps this 700MB ISO is causing trouble. Is anyone else having trouble and if so, should we talk to Mr. Knopper about going back to 695MB ISOs?
-
Senior Member
registered user
No problems burning the 9-24 release w/ cdrecord here. I've heard lots of problems related to burning 9-24 but w/ those lamo winapps not cdrecord. You are using cdrecord in Linux right? If your md5sums don't come back then that seems a little odd to me.
-
I have had the same problem burning this release with Linux. Two out of five 700MB CDRW disks tried have failed. I also assumed that it was a size related issue. I have checked the md5sums on the files and have never had a problem in the past.
dash
-
Senior Member
registered user
Originally Posted by
dash
I have had the same problem burning this release with Linux. Two out of five 700MB CDRW disks tried have failed. I also assumed that it was a size related issue. I have checked the md5sums on the files and have never had a problem in the past.
dash
It burns fine on my cdrw's do you blank=all before you record the new ISO to the disk?
-
Junior Member
registered user
Originally Posted by
Stephen
It burns fine on my cdrw's do you blank=all before you record the new ISO to the disk?
I blanked mine with blank=disc and I'm using quality media.
It's possible people are having this problem but don't realize it since it burns without an error and will boot. It wasn't until trying to run network config that it became evident that there was a problem with the disc. I see other people on the forum who are having misc. problems running specific apps, could these be related?
Similar Threads
-
By bwathen in forum Laptops
Replies: 3
Last Post: 04-29-2005, 12:53 PM
-
By harken in forum Hardware & Booting
Replies: 2
Last Post: 02-26-2005, 03:23 AM
-
By jesselong in forum Customising & Remastering
Replies: 5
Last Post: 05-26-2004, 01:24 PM
-
By AP in forum Customising & Remastering
Replies: 0
Last Post: 04-11-2004, 03:36 AM
-
By hnt in forum General Support
Replies: 4
Last Post: 08-19-2003, 09:36 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch
$37.41
Juniper Networks EX3300 EX3300-48P PoE+ 48-Port 4x SFP Gigabyte Ethernet Switch
$59.99
Juniper EX3300-48P 48-Port 10/100/1000BASE-T (48 PoE+ ports) with 4 SFP+
$74.00
JUNIPER EX3400-48P 48x 1GB PoE+ RJ-45 4x 10GB SFP+ 2x 40GB QSFP+, DUAL AC POWER
$168.00
Juniper Networks SRX320-POE 6-Port Service Gateway Security Appliance Tested
$149.99
Juniper EX4200-48PX 48-PORT 10/100/1000BASET PoE Ethernet Switch
$50.00
Juniper EX3400-48P 48-Ports PoE+ 4x SFP+ and 2x QSFP+ Managed Switch Tested
$170.00
Juniper MPC-3D-16XGE-SFPP
$575.00
Juniper EX 4300 EX4300-48P Gigabit Network Switch JunOS 21.4R3-S7 48 Port PoE
$249.00
Juniper EX4300-48P 48 Port PoE Gigabit Network Switch - COMES WITH DUAL POWER
$179.99