Amiga VAMPIRE V4 IN ULTIMATE CASE + RII KEYBOARD MOUSE AND P.S. READY TO GO For Sale

Amiga VAMPIRE V4 IN ULTIMATE CASE + RII KEYBOARD  MOUSE AND P.S. READY TO GO
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.


Buy Now

Amiga VAMPIRE V4 IN ULTIMATE CASE + RII KEYBOARD MOUSE AND P.S. READY TO GO:
$855.06

Apollo Standalone V4+

Amiga-compatiblecomputer

CPU: Apollo 68080 AMMX with 64 - bit support

CPU can choose between 92/100 MHz

3D Support: Maggie 3D unit, truecolor hardware texturingwith Zbuffer and Shading

Memory: 512 MB DDR3 or 1024 MB DDR3 (12 MB ChipRAM)

Video: SuperAGA, RTG, Truecolor 32-bit, up to 1920x1080 /1280x1024 / 1280x720

Comes with build-in flicker fixer/deinterlacer

Audio: 8/16-bit, 56 kHz, 24-bit mixing, 16 DMA voices

FastIDE/CompactFlash controller up to 24 MB/sec

3x USB port (keyboard/mouse/joypad)

2x DB9 ports (mouse/joystick)

100Mbit Ethernet RJ45 port

plug for RTC module

3 internal Expansion ports (e.g. Seriel /2nd SDcard Module)

FastKick

Digital Audio/Video out / microSD card port

Key functions of the V4 Ultimate Expansion Board include the following:

Audio related:

16-bit high-quality analogue audio output, with separate ultralow-noise LDO power regulator. 112 dB SNR, and -93 dB THD. Playback both PAULA AND ARNE audio at high quality!

Pass-through of analogue audio out to case 3.5 mm audio jack using the standard case HD AUDIO/AC97 connector.

MIDI in/out (serial.device; using beat-buddy format connector due to space related:

Buffered serial UART in/out for FTDI cable (serial.device),3V3 only (FTDI cable provided).

RS232 in/out (RX/TX lines) control:

Integration with standard ITX front-panel case buttons andLEDs.

Full hardware cold reset from a single press of the casepower/reset button.

Full startup/shutdown from the ITX case power button (powerremoved from V4). Soft glowing LED when the V4 is powered down.

LED output selectable for single-led system (combined POWERand IDE access) or dual-led system (separate POWER and IDE access).

12V input from a wide range of inputs: a barrel jackconnector (external), ATX PSU connector (internal), or PC peripheral connector('Molex') (internal).

Separate 5V lines for powering the Apollo V4, andperipherals (e.g., USB).

Provision of SAFE +5V and +12V passthrough for poweringexternal components like drives/CD-ROMs for the V4.

Smart power meter for voltage and current measurement of the12V supply, and two 5V for legacy DB9 mice and joysticks. USB keyboardport from the V4 is accessible directly from the rear panel of the UltimateExpansion Board.

USB mouse accessible via USB header on the board, forconnection to case or expander USB ports. Both USB2 and USB3 headers areprovided to ensure maximum case compatibility.

Second USB gamepad port provided on the internal USB header,for both V4 and V4+ systems (i.e., it provides the second gamepad port fororiginal V4 board form factor, for install into any Mini-ITXcompatible case.

A 3-pin fan header for powering 12V fans.

Internal mounting of USB blaster with mini-USB socket on therear ITX panel, for easy FPGA programming. No more opening of the case to plugin the USB blaster!

Internal programming header for on-board microprocessor (3V3FTDI)

Multi-colour LED back-lit V4 logo

1.8" 160x128 pixel colour LCD, with communicationdirectly from the Apollo V4!

On-board temperature sensor for system monitoring.

A compact-flash extender to enable you to remove and changecompact-flash cards without opening the case. Usb Blaster built in.

Used for 3 hours to test complete system ready to go including Querty keyboard and mouse 2 compact flash cards 32 gig power pack immaculate you can flash without removing your v4 from case. these will be well packed and posted reg post.



Buy Now

Documentation