Atari 800 48k RAM Card with Jumper Board For Sale

Atari 800 48k RAM Card with Jumper Board


Buy Now

Atari 800 48k RAM Card with Jumper Board:
$34.95

The 48k RAM Card for the Atari 800 easily replaces your Atari's 800 memory with 48k of base memory. Unlike many other memory upgrades, this upgrade requires no soldering and/or tearing your computer apart. All that is required is for you to remove your current memory card(s), install the “Jumper Board” in memory module slot 1 and 48k RAM Card in memory module slot 2. That’s it! The 3rd slot is available for other upgrades.
Instructions:Remove the top cover on your Atari 800 by opening the cartridge cover. Then either remove the 2 screws at the rear of the cartridge cover or turn the 2 latches so that your cover can be removed. Remove the cover. The front slot will have the Operating System. The 3 slots after the Operating System will have the memory modules. Remove the memory modules if present. In the slot closest to the Operating System, install the Jumper Board. The Jumper Board is labeled as to the direction that faces the keyboard. Ensure this board is inserted in the correct direction or else your Atari may be damaged. In the next slot, install the 48k RAM Card. This board is also labeled as to the direction that faces the keyboard. Ensure this board is inserted in the correct direction or else your 48k RAM Card will suffer damage. Re-install the top cover and enjoy.
Note: Pictures show the jumper board and 48k RAM Card as well as the installation in an Atari 800. Atari 800 not included...of course.


Buy Now

Documentation