Atari FujiNet 800/XL/XE (Devkit Ver 8 MB ESP32-DevKitC-VE board) V3 FM 1.5.0 For Sale

Atari FujiNet 800/XL/XE (Devkit Ver 8 MB ESP32-DevKitC-VE board) V3 FM 1.5.0
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Buy Now

Atari FujiNet 800/XL/XE (Devkit Ver 8 MB ESP32-DevKitC-VE board) V3 FM 1.5.0:
$60.00

Version 3:
Custom built Devkit based Atari FujiNet using open source hardware and software assembled and tested by JFCRetro.
This V3 continues to use the micro SD card "Push and Lock" style and switches to a refreshed design completely enclosed gray case printed on a Bambu Labs A1 3D printer.Finally includes a modular connector to the main board for the SIO cable..Included:
  • 1 Devkit-based FujiNet assembled and fully tested
  • 8 MB based firmware installed
  • Attached original (1/2) JAE Atari SIO cable
Please NOTE:
  • This version does NOT have an additional SIO port, so it must be the last in the SIO chain or plugged directly in the computer.
  • The screen shot of the web interface is from an older firmware version 1.4, but the unit is loaded with Firmware 1.5.0.
The Devkit based FujiNet can be flashed using the FujiFlasher, but you will need to use a custom built version for the 8 MB board.
The hardware and software design are all credited to the original authors, not JFCRetro. The firmware used for this assembled unit was not modified in any way. The source code was built targeting the 8 MB ESP32-DevKitC-VE board, using commits from the master branch.
Please reach out with any questions.
Flashed with: down the middle B button when booting (until the Fujinet logo appears) the Atari to clear any saved Fujinet config and force the WIFI configure setup to run.
NOTE: Items are normally shipped WEEKLY on Saturday mornings, via US Postal Service.Shipping to US only.
Reminders:
  • These are built in small batches.
  • Tested for many hours on original Atari hardware and the Atari NUC.
  • Sold at build cost plus a small assemble fee.
  • More will be available as they are built.
  • The buyer assumes full responsibility for the product. The seller (JFCretro) is not responsible for use/misuse.
Buy Now

Documentation