Server for Home Lab 1U Micro Mini Low-Power (~30W Idle) For Sale
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Server for Home Lab 1U Micro Mini Low-Power (~30W Idle):
Server for Home Lab 1U Micro Mini Low-Power (~30W Idle)
Used. Tested. Pulled from working environment. Minor cosmetic imperfections like scratches, small dents, missing rubber feet, dust, etc., that do not affect performance.
Returns accepted. Item must be well packaged and returned in the condition received.
Approximate Dimensions & Weight: 13” x 8” x 1.75” (1U); 6 lbs
Operating System No operating system included. Buyer can install their own 64-bit or 32-bit OS that uses a text-based serial console interface (not a graphical user interface). OS installation via USB drive and PXE is possible.
Video This is a “headless” server; it does not have a built-in video gpu or video port. A serial console cable (RJ45 to USB-A, not included) and a free utility like Putty is needed to access the BIOS and compatible OS setup.
Intel 1Gb Ethernet Ports There are (6) GbE ethernet ports. The order of the ports from left to right is igb4, igb5, igb0, igb1, igb2, igb3.
Fans This server has two 1U case cooling exhaust fans at the rear. They ramp up to max rpm at startup and then slowly move down to operating rpm over several minutes. Operating acoustic is approximately 45 dBA.
Troubleshooting We cannot provide technical assistance with setup or use. Buyer assumes all responsibility for setup and use.
Only items shown in the photos and detailed in the listing will ship.
CPU: Intel 64-bit Pentium processor B925C, 2-core / 4-thread, 2.00GHz, 4MB L3 cache, 15W.
Storage: Intel 80GB SSD. There is an additional 2.5” drive slot available with mounting hardware and SATA data/power connection. No hardware RAID.
RAM: 4GB DDR3 ECC RAM DIMM, (2) x 2GB. Two additional open slots available.
Ethernet ports: (6) – Intel GbE copper ports. The GbE ports in order from left to right are (2) Intel 210I (igb4, igb5) & (4) Intel I347-AT4 (igb0, igb1, igb2, igb3).
Serial console port: (1) on the far left.
Power adapter: (1) 12v power adapter is included. Power cord included.
USB: (2) USB ports on front panel.
Motherboard: Advantech NAMB-3250MB; American Megatrends BIOS
Fans: (2) 40mmx40mmx20mm 4-pin