Describe bugs/3.4 here.
Bug reporting for Knoppix version 3.4 2004-05-03 only.
!Please also add your name in brackets after the bug!
Keep in mind that FF=Fabianx though, so I have to write less ;-). The next number below means the next "free" bug number. Please increment it, after adding a bug.
Open Bugs (next number=38)
36. Tekram 390u SCSI controller fails with NCR53c8xx.o kernel module
The autoconfiguration fails for the Tekram 390U SCSI controller. It finds the controller, finds the devices but fails with a timeout message. What I can see is that the controller is constantly reset. As far as I remember, I tried another SCSI driver for the NCR53c8xx chipset, with the same result.
This error was unexpected because the Tekram 390U normally works with this driver. No problems at all with, for example, the SuSE Live-CDs (from 7.3 up to 9.0!!!). (submitted by cyrusdreams)
35. sftp/scp fail transferring large (>200MB) files [[[Red Charlie]]] Running Knoppix 3.4 03May2004 on two machines (both using kernel2.6) from sftp: sftp> lcd KNOPPIX_V3.3-2003-09-24-EN sftp> !ls KNOPPIXV3.3-2003-09-24-EN.iso KNOPPIXV3.3-2003-09-24-EN.iso.md5.asc KNOPPIX_V3.3-2003-09-24-EN.iso.md5 sftp> put KNOPPIX_V3.3-2003-09-24-EN.iso Uploading KNOPPIXV3.3-2003-09-24-EN.iso to /stage/home/KNOPPIXV3.3-2003-09-24 -EN.iso Uploading KNOPPIXV3.3-2003-09-24-EN.iso to /stage/home/KNOPPIXV3.3-2003-09-24 -EN.iso Received disconnect from UNKNOWN: 2: Corrupted MAC on input.
I can get between 150 to 400 MB copied via either sftp or scp before it dies. I can run sshd on either machine and replicate the problem (err msg can vary, however.--sorry don't remember the other variants right now).
plain old ftp seems to work just fine, so I don't think it's my nics/switch
pertinent dmesg output (from machine running off of cd, other box is hdd install with two nics, doing NAT): Linux version 2.6.5 (root@Knoppix) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 SMP Sat May 1 22:31:22 CEST 2004 ... eth0: Realtek RTL8201 PHY transceiver found at address 1. eth0: Using transceiver found at address 1 as default eth0: SiS 900 PCI Fast Ethernet at 0xd400, IRQ 10, 00:0d:87:7a:7e:40. eth0: Media Link On 100mbps full-duplex agpgart: Unsupported SiS chipset (device id: 0635)
34. Incorrect handling of national characters in floppy (FAT) and NTFS filesystems. Knoppix version is 3.4 c't edition. To test, in windows ( 2000, XP or similar ) create file with the name "�?šžČŠŽ.txt" on a floppy and on a NTFS partition ( you can also try a FAT partition ). Then boot knoppix and list the floppy and partition. The file name will have some "random" characters instead of "�?šžČŠŽ.txt". ( Hint : if you don't have these chars on your keyboard, just copy