Filesystem problem ....

[Victis]

hi, everytime I boot knoppix from cd it starts to load and then says "cannot find knoppix file system droping to limited shell"
it will however boot properly in failsafe mode, my other computer boots in normally with no trouble , any ideas?????

[rrfish72]

You need to find out which cheat codes will work. Here is a list of them for you:

knoppix lang=cn|de|da|es|fr|it|nl specify language/keyboard
knoppix lang=pl|ru|sk|tr|tw|us specify language/keyboard
knoppix gmt Use GMT-based time
knoppix tz=Europe/Berlin Use this timezone for TZ
knoppix atapicd Do NOT use SCSI-Emulation for IDE CD-Roms
knoppix alsa (or alsa=es1938) Use ALSA sound driver (at your own risk)
knoppix desktop=fluxbox|icewm Use specified WM instead of KDE (1)
knoppix desktop=kde|larswm|twm Use specified WM instead of KDE (2)
knoppix desktop=wmaker|xfce Use specified WM instead of KDE (3)
knoppix screen=1280x1024 Use specified Screen resolution for X
knoppix xvrefresh=60 (or vsync=60) Use 60 Hz vertical refresh rate for X
knoppix xhrefresh=80 (or hsync=80) Use 80 kHz horizontal refresh rate for X
knoppix xserver=XFree86|XF86_SVGA Use specified X-Server
knoppix xmodule=ati|fbdev|i810|mga Use specified XFree4-Module (1)
knoppix xmodule=nv|radeon|savage|s3 Use specified XFree4-Module (2)
knoppix xmodule=radeon|svga|i810 Use specified XFree4-Module (3)
knoppix 2 Runlevel 2, Textmode only
knoppix floppyconfig Run "knoppix.sh" from a floppy
knoppix myconf=/dev/sda1 Run "knoppix.sh" from a partition
knoppix myconf=scan (or config=scan) Try to find "knoppix.sh" automatically
knoppix home=/dev/sda1/knoppix.img Mount loopback file as /home/knoppix
knoppix home=scan Automatic search for knoppix homedir
knoppix no{apic,agp,apm,audio,ddc} Skip parts of HW-detection (1)
knoppix no{dhcp,fstab,firewire} Skip parts of HW-detection (2)
knoppix no{pcmcia,scsi,swap,usb} Skip parts of HW-detection (3)
knoppix pnpbios=off No PnP Bios initialization
knoppix acpi=off Disable ACPI Bios completely
knoppix usb2 Try to initialize USB 2.x controller(s)
failsafe Boot with (almost) no HW-detection
knoppix pci=irqmask=0x0e98 Try this, if PS/2 mouse doesn't work *)
knoppix pci=bios Workaround for bad PCI controllers
knoppix ide2=0x180 nopcmcia Boot from PCMCIA-CD-Rom (some notebooks)
knoppix mem=128M Specify Memory size in MByte
knoppix dma Enable DMA accelleration for ALL IDE-Drives
knoppix noeject Do NOT eject CD after halt
knoppix noprompt Do NOT prompt to remove the CD
knoppix vga=normal No-framebuffer mode, but X
knoppix blind Start Braille-Terminal (no X)
knoppix brltty=type,port,table Parameters for Braille device
knoppix wheelmouse Enable IMPS/2 protocol for wheelmice
knoppix nowheelmouse Force plain PS/2 protocol for PS/2-mouse
fb1280x1024 Use fixed framebuffer graphics (1)
fb1024x768 Use fixed framebuffer graphics (2)
fb800x600 Use fixed framebuffer graphics (3)
knoppix keyboard=us xkeyboard=us Use different keyboard (text/X)
knoppix splash Boot with fancy background splashscreen
+ animations + progress bar **)
knoppix toram Copy CD to RAM and run from there
knoppix tohd=/dev/hda1 Copy CD to HD partition and run from there
knoppix fromhd Skip checking for Knoppix on CD-ROM
knoppix fromhd=/dev/hda1 Boot from previously copied CD-Image
knoppix bootfrom=/dev/hda1 Access Image then boot from previously
copied CD-Image (enables booting from
NTFS / ReiserFS) ***)
knoppix bootfrom=/dev/hda1/KNX.iso Access image, boot from ISO-Image. ***)
knoppix knoppix_dir=KNOPPIX Directory to search for on the CD.
knoppix knoppix_name=KNOPPIX Cloop-File to search for on the CD.
knoppix testcd Check CD data integrity and md5sums
expert Interactive setup for experts

NEW Kernels and Options in version 3.4:
knoppix26 [Options...] Boots with Kernel 2.6 (2.4 is default)
expert26 [Options...] Same for expert mode
knoppix26 acpi=off Disable ACPI configuration in Kernel 2.6
memtest Run memtest86 instead of Linux

I would try knoppix nodma vga=normal to start.