Orinoco problem, Have not seen any like this
Posted on Knoppix-std forums also, Using newest versions of both Knoppix-STD and regular Knoppix
Computer is a Compaq presario r3000 Laptop. I have a onboard ethernet and wireless card built in, the Realtek and the Broadcom listing I believe. The broadcom is a wireless G card so im not expecting that one to work, the ethernet port works fine on the wired router. I'm trying to get my Orinoco Gold (bought here ,top left http://stores.ebay.com/The-TechWirel...enameZl2QQtZkm ) card working in the PCMCIA slot.
No matter what distro I use (suse,knoppix,knoppix-std,mandrake) It doesn't want to work/light up at all, windows it works great.
When I boot knoppix this is the message I get
cardmgr[67]: starting, version is 3.2.2.
cardmgr[67]: socket 0: Anonymous memory
cardmgr[67]: 'modprobe memory_cs'
cardmgr[67]: can't locate module memory_cs
cardmgr[67]: modprobe exited with status 255
cardmgr[67]: module /lib/modules/2.4.21-xfs/pcmcia/memory_cs.o not available
cardmgr[67]: get dev info on socket 0 failed: resource temporarily unavailable
I ran Sisoft to find PCMCIA controller, I think this is what this is.
Cardbus/PCMCIA Controller 1+2
Texas Instruments (T.I.) PCI1620 Pc card Cardbus Controller with Ultramedia
lspci returns
00:00.0 Host bridge: nVidia Corporation: Unknown device 00d1 (rev a4)
00:01.0 ISA bridge: nVidia Corporation: Unknown device 00d0 (rev a6)
00:01.1 SMBus: nVidia Corporation: Unknown device 00d4 (rev a4)
00:02.0 USB Controller: nVidia Corporation: Unknown device 00d7 (rev a5)
00:02.1 USB Controller: nVidia Corporation: Unknown device 00d7 (rev a5)
00:02.2 USB Controller: nVidia Corporation: Unknown device 00d8 (rev a2)
00:06.0 Multimedia audio controller: nVidia Corporation: Unknown device 00da (rev a2)
00:06.1 Modem: nVidia Corporation: Unknown device 00d9 (rev a2)
00:08.0 IDE interface: nVidia Corporation: Unknown device 00d5 (rev a5)
00:0a.0 PCI bridge: nVidia Corporation: Unknown device 00dd (rev a2)
00:0b.0 PCI bridge: nVidia Corporation: Unknown device 00d2 (rev a4)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
01:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 420 Go 32M] (rev a3)
02:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
02:02.0 Network controller: Broadcom Corporation: Unknown device 4320 (rev 03)
02:04.0 CardBus bridge: Texas Instruments: Unknown device ac54 (rev 01)
02:04.1 CardBus bridge: Texas Instruments: Unknown device ac54 (rev 01)
02:04.2 System peripheral: Texas Instruments: Unknown device 8201 (rev 01)
dmesg returned
GDT: Found 0 PCI Storage RAID Controllers
megaraid: v1.18f (Release Date: Tue Dec 10 09:54:39 EST 2002)
megaraid: no BIOS enabled.
DC390: 0 adapters found
Failed initialization of WD-7000 SCSI card!
ISO 9660 Extensions: Microsoft Joliet Level 3
kmod: failed to exec /sbin/modprobe -s -k nls_iso8859-1, errno = 2
kmod: failed to exec /sbin/modprobe -s -k nls_iso8859-1, errno = 2
ISO 9660 Extensions: RRIP_1991A
cloop: Initializing cloop v1.00
cloop: /cdrom/KNOPPIX/KNOPPIX: 21054 blocks, 65536 bytes/block, largest block is 65562 bytes.
cloop: loaded (max 8 devices)
ISO 9660 Extensions: RRIP_1991A
Freeing unused kernel memory: 128k freed
Real Time Clock Driver v1.10e
apm: BIOS not found.
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
Yenta IRQ list 02f8, PCI irq11
Socket status: 30000011
Yenta IRQ list 02f8, PCI irq11
Socket status: 30000086
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0820-0x08ff: clean.
cs: IO port probe 0x0800-0x080f: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x20f 0x378-0x37f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
cs: warning: no high memory space available!
cs: memory probe 0x0d0000-0x0dffff: excluding 0xd0000-0xdffff
cs: memory probe 0x0c0000-0x0cffff: excluding 0xc0000-0xcffff
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.1 $ time 23:39:54 Sep 6 2003
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
PCI: Setting latency timer of device 00:02.0 to 64
usb-ohci.c: USB OHCI at membase 0xe149f000, IRQ 11
usb-ohci.c: usb-00:02.0, PCI device 10de:00d7 (nVidia Corporation)
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 3 ports detected
PCI: Setting latency timer of device 00:02.1 to 64
usb-ohci.c: USB OHCI at membase 0xe14a1000, IRQ 10
usb-ohci.c: usb-00:02.1, PCI device 10de:00d7 (nVidia Corporation)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
usbdevfs: remount parameter error
hub.c: new USB device 00:02.1-1, assigned address 2
usb.c: USB device 2 (vend/prod 0x46d/0xc00b) is not claimed by any active driver.
mice: PS/2 mouse device common for all mice
usb.c: registered new driver hiddev
usb.c: registered new driver hid
input0: USB HID v1.10 Mouse [Logitech USB Mouse] on usb2:2.0
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <[email protected]>
hid-core.c: USB HID support drivers
Serial driver version 5.05c (2001-07-0 with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
8139too Fast Ethernet driver 0.9.26
eth0: RealTek RTL8139 Fast Ethernet at 0xe14c4000, 00:02:3f:20:88:eb, IRQ 11
eth0: Identified 8139 chip type 'RTL-8139C'
Intel 810 + AC97 Audio, version 0.24, 23:32:08 Sep 6 2003
PCI: Setting latency timer of device 00:06.0 to 64
i810: NVIDIA nForce Audio found at IO 0x1c00 and 0x1400, MEM 0x0000 and 0x0000, IRQ 11
i810_audio: Audio Controller supports 6 channels.
i810_audio: Defaulting to base 2 channel mode.
i810_audio: Resetting connection 0
ac97_codec: AC97 Audio codec, id: ADS116 (Unknown)
i810_audio: AC'97 codec 0 supports AMAP, total channels = 2
FAT: Did not find valid FSINFO signature.
Found signature1 0x4e0005 signature2 0xc00b6600 sector=1.
VFS: Can't find a valid FAT filesystem on dev 03:01.
FAT: Did not find valid FSINFO signature.
Found signature1 0x4e0005 signature2 0xc00b6600 sector=1.
VFS: Can't find a valid FAT filesystem on dev 03:01.
NTFS driver 2.1.4a [Flags: R/W MODULE].
NTFS volume version 3.1.
eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 41e1.
eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 41e1.
apm: BIOS not found.
Ifconfig returns
eth0 Link encap:Ethernet HWaddr 00:02:3F:20:88:EB
inet addr:192.168.1.109 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1989 errors:0 dropped:0 overruns:0 frame:0
TX packets:1808 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:2064657 (1.9 MiB) TX bytes:313799 (306.4 KiB)
Interrupt:11 Base address:0x4000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:200 (200.0 b) TX bytes:200 (200.0 b)
iwconfig returns
lo no wireless extensions.
eth0 no wireless extensions.
I hope this helps, anything I can try work be a big help, thanks
