Knoppix erkennt zweite Partition nicht

Mein Knoppix V34 erkennt die zweite Partition meiner Festplatte nicht. Was kann ich tun, dass die zweite Partition eingebunden wird.

Vielen Dank für eine Auskunft.

from free translation:

Quote:

---

My Knoppix V34 does not recognize the second partition of my hard disk. What I can make that the second partition is integrated.

Many thanks for information.

---

Please post the details of your partitions and the output from 'cat /etc/fstab'.

Attempt at free translation. I hope this makes sense:
Schlagen Sie bitte die Details Ihrer Teilungen und der Produktion von der 'cat /etc/fstab'.

mache ein
sudo fdisk -l /dev/hda
und ein
sudo cat /etc/fstab

in der console

und poste es hier

We want to do a KNOPPIX instruction-workshop. We use Notebook-Computers with WindowsXP installed.

Under WindowsXP-SP2 (installed on C:) two partitions of the harddisk are accessible :
C: NTFS used 10.9 GB
free 26.3 GB
total 37.3 GB and
D: FAT32 used 38.0 MB
free 18.5 GB
total 18.5 GB

to our surprise KNOPPIX sees only one big Partition.
We have tried with Versions 3.3 3.4 3.6 3.7 and Linux-Kernels 2.4 and 2.6,
with always the same result. We tried also QTparted but the
FAT32-partition remained invisible under KNOPPIX.

According to the suggestions the following tests were run :

1) sudo fdisk -l /dev/hda produced

Platte /dev/hda: 60.0 GByte, 60011642880 Byte
255 K?pfe, 63 Sektoren/Spuren, 7296 Zylinder
Einheiten = Zylinder von 16065 * 512 = 8225280 Bytes

Ger?t Boot Start End Blocks Id System
/dev/hda1 * 1 7296 58605088 44 Unbekannt

2) sudo cat /etc/fstab produced

/proc /proc proc defaults 0 0
/sys /sys sysfs noauto 0 0
/dev/pts /dev/pts devpts mode=0622 0 0
/dev/fd0 /mnt/auto/floppy auto user,noauto,exec,umask=000 0 0
/dev/cdrom /mnt/auto/cdrom auto user,noauto,exec,ro 0 0
# Added by KNOPPIX
/dev/hda1 /mnt/hda1 ntfs noauto,users,exec,ro,umask=000,uid=knoppix,gid=kno ppix 0 0

3) sudo mount produced

/dev/root on / type ect2 (rw)
/dev/scd0 on /cdrom type iso9660 (ro)
/dev/cloop on /KNOPPIX type iso9660 (ro)
/ramdisk on /ramdisk type tmpfs (rw,size=391808k)
/proc/bus/usb on /proc/bus/usb type usbdefs (rw,devmode=0666)
automount(pid508) on /mnt/auto type autofs (rw,fd=4,pgrp=508,minproto=2,maxproto=4)

As far as we can see, the real FAT32-Partition under Windows is invisible for KNOPPIX.

mmmh
how dit you partiton yuor hd



do you use a bootmanager

fdisk reads the MBR and tell you wath's ther in and ther sems only to be the ntfs
i don't know anything about XP but maybe it stors the entrypoint of your FAT32 partiton
somwhere in a registery

if you know your startpoint of FAT partition and sice you may run fdisk ant write it to the MBR

hope it helps

franz