Newbie with problem getting KNOPPIX up and running!
Although I consider myself quite PC-literate, I'm new to KNOPPIX (or any other LINUX distro) and new to this forum, so first let me say 'hello'.
I just downloaded KNOPPIX v3.7 and successfully burned the iso to CD. The CD boots up and seems to perform most, if not all, hardware detection but then I get the following message on my LCD screen:
INPUT SIGNAL
OUT OF RANGE
and from that point on, the system is no longer responsive. I sure hope you guys can figure out the problem and get me up and running.
Fwiw, here is my hardware configuration...
CPU Properties:
CPU Type Intel Pentium 4HT
CPU Alias Northwood HyperThreading
CPU Stepping D1
CPUID CPU Name Intel(R) Pentium(R) 4 CPU 2.80GHz
CPU Speed:
CPU Clock 2800.16 MHz (original: 2800 MHz)
CPU Multiplier 14.0x
CPU FSB 200.01 MHz (original: 200 MHz)
Memory Bus 200.01 MHz
CPU Cache:
L1 Trace Cache 12K Instructions
L1 Data Cache 8 KB
L2 Cache 512 KB (On-Die, ATC, Full-Speed)
Motherboard Properties:
Motherboard Name Asus P4C800 Deluxe (5 PCI, 1 AGP Pro, 1 WiFi, 4 DIMM, Audio, Gigabit LAN, IEEE-1394)
Chipset Properties:
Motherboard Chipset Intel Canterwood i875P
CAS Latency (CL) 2T
RAS To CAS Delay (tRCD) 3T
RAS Precharge (tRP) 3T
RAS Active Time (tRAS) 6T
PAT Enabled
SPD Memory Modules:
Corsair CMX512-3200C2 512 MB PC3200 DDR SDRAM (CL 2.5 @ 200 MHz) (CL 2.0 @ 166 MHz)
Corsair CMX512-3200C2 512 MB PC3200 DDR SDRAM (CL 2.5 @ 200 MHz) (CL 2.0 @ 166 MHz)
BIOS Properties:
System BIOS Date 05/06/03
Video BIOS Date 12/12/01
DMI BIOS Version 1006.005
Graphics Processor Properties:
DirectX 4.09.00.0904 (DirectX 9.0)
Video Adapter Matrox G550 (Matrox Millennium G550)
GPU Clock 130 MHz
Warp Clock 130 MHz
Memory Clock 162 MHz
Physical Memory:
Total 1022 MB
Used 403 MB
Free 619 MB
Utilization 39 %
Memory Module Properties:
Module Name Corsair CMX512-3200C2
Module Size 512 MB (2 rows, 4 banks)
Module Type Unbuffered
Memory Type DDR SDRAM
Chipset Properties:
Motherboard Chipset Intel Canterwood i875P
In-Order Queue Depth 12
PAT Enabled
North Bridge Properties:
North Bridge Intel Canterwood i875P
Revision / Stepping 02 / A2
South Bridge Properties:
South Bridge Intel 82801EB ICH5
Revision / Stepping C2 / A2/A3
Memory Timings:
CAS Latency (CL) 2T
RAS To CAS Delay (tRCD) 3T
RAS Precharge (tRP) 3T
RAS Active Time (tRAS) 6T
AGP Properties:
AGP Version 3.00
AGP Status Enabled
AGP Aperture Size 64 MB
Supported AGP Speeds 1x, 2x, 4x, 8x
Current AGP Speed 4x
Fast-Write Supported, Disabled
Side Band Addressing Supported, Enabled
BIOS Properties:
BIOS Type Asus AMI
System BIOS Date 05/06/03
Video BIOS Date 12/12/01
Video Adapter Properties:
Device Description Matrox Graphics Millennium G550 AGP
Adapter String Matrox Millennium G550 AGP
BIOS String v1.4.014
Chip Type Matrox G550
DAC Type Integrated, 360 MHz
Serial Number PBT66706
Installed Drivers G550DHD (5.13.01.1360)
Memory Size 32 MB
Video Monitor Princeton VL193
Type LCD Panel - 19" 1280 x 1024 (1280 x 960 in use)
Disk drives:
C: WDC WD360GD SATA 5.1.2535.0
D: Maxtor 6 Y120P0 ATA 5.1.2535.0
DVD/CD-ROM drives:
LITE-ON LTR-52246S 5.1.2535.0
Floppy disk controllers:
Standard floppy disk controller 5.1.2600.0
IDE ATA/ATAPI controllers:
Promise 378 - SATA Channel 5.1.2600.2180
Intel(R) 82801EB Ultra ATA Controllers 5.0.1007.0
Secondary IDE Channel 5.1.2600.2180
Imaging devices:
MINOLTA DiMAGE Scan Dual3
Keyboards:
Standard 101/102-Key or Microsoft Natural PS/2 Keyboard5.1.2600.2180
Mice and other pointing devices:
Microsoft USB-PS/2 IntelliPoint Mouse 5.20.413.0
