Are IRQ well asigned in my PC?

Hi!
Aparently all is working but when I try to use K3b or cdrecord or similar my DVD/CD unit not work more!!!!!
I have try all that I can see on the forum and in the Internet but allways I have the same problem, inclusive I have test other distros (ubuntu, kanotix)

Looking at in the messages file I have seen that aparently in my PC I have the same irq for ATAPI device and for my first hard disk.

I'm including now different information of my system . Maybe can help me to found the problem.

Thanks in advance.

Javier

1.- 'cat /proc/scsi/scsi'
/home/javiergp>cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: ST3200827AS Rev: 3.AA
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: ST3200827AS Rev: 3.AA
Type: Direct-Access ANSI SCSI revision: 05
/home/javiergp>

2.- 'cdrecord -scanbus'
/home/javiergp>cdrecord -scanbus
Cdrecord-Clone 2.01.01a01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Joerg Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
and thus may have bugs that are not present in the original version.
Please send bug reports and support requests to <[email protected]>.
The original author should not be bothered with problems of this version.

cdrecord: Warning: Running on Linux-2.6.12
cdrecord: There are unsettled issues with Linux-2.5 and newer.
cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
Linux sg driver version: 3.5.27
Error: Cannot gain SYS_RAWIO capability.Is cdrecord installed SUID root?
: Operation not permitted
Using libscg version 'ubuntu-0.8ubuntu1'.
cdrecord: Warning: using inofficial version of libscg (ubuntu-0.8ubuntu1 '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling').
scsibus0:
0,0,0 0) 'HL-DT-ST' 'DVDRAM GSA-4167B' 'DL12' Removable CD-ROM
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
scsibus1:
1,0,0 100) 'ATA ' 'ST3200827AS ' '3.AA' Disk
1,1,0 101) *
1,2,0 102) *
1,3,0 103) *
1,4,0 104) *
1,5,0 105) *
1,6,0 106) *
1,7,0 107) *
/home/javiergp>

3.- A piece of messages file
Feb 24 15:27:53 kappaccd syslogd 1.4.1#17: restart.
Feb 24 15:27:53 kappaccd kernel: klogd 1.4.1#17, log source = /proc/kmsg started.
Feb 24 15:27:53 kappaccd kernel: Inspecting /boot/System.map-2.6.12
Feb 24 15:27:53 kappaccd kernel: Loaded 29754 symbols from /boot/System.map-2.6.12.
Feb 24 15:27:53 kappaccd kernel: Symbols match kernel version 2.6.12.
Feb 24 15:27:53 kappaccd kernel: No module symbols loaded - kernel modules not enabled.
Feb 24 15:27:53 kappaccd kernel: Linux version 2.6.12 (root@Knoppix) (gcc-Version 3.3.6 (Debian 1:3.3.6-7)) #2 SMP Tue Aug 9 23:20:52 CEST 2005
Feb 24 15:27:53 kappaccd kernel: BIOS-provided physical RAM map:
Feb 24 15:27:53 kappaccd kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Feb 24 15:27:53 kappaccd kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Feb 24 15:27:53 kappaccd kernel: BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Feb 24 15:27:53 kappaccd kernel: BIOS-e820: 0000000000100000 - 000000003bfb0000 (usable)
Feb 24 15:27:53 kappaccd kernel: BIOS-e820: 000000003bfb0000 - 000000003bfbe000 (ACPI data)
Feb 24 15:27:53 kappaccd kernel: BIOS-e820: 000000003bfbe000 - 000000003bfe0000 (ACPI NVS)
Feb 24 15:27:53 kappaccd kernel: BIOS-e820: 000000003bfe0000 - 000000003c000000 (reserved)
Feb 24 15:27:53 kappaccd kernel: BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
Feb 24 15:27:53 kappaccd kernel: 63MB HIGHMEM available.
Feb 24 15:27:53 kappaccd kernel: 896MB LOWMEM available.
Feb 24 15:27:53 kappaccd kernel: found SMP MP-table at 000ff780
Feb 24 15:27:53 kappaccd kernel: DMI 2.3 present.
Feb 24 15:27:53 kappaccd kernel: ACPI: PM-Timer IO Port: 0x4008
Feb 24 15:27:53 kappaccd kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Feb 24 15:27:53 kappaccd kernel: Processor #0 15:4 APIC version 20
Feb 24 15:27:53 kappaccd kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Feb 24 15:27:53 kappaccd kernel: Processor #1 15:4 APIC version 20
Feb 24 15:27:53 kappaccd kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
Feb 24 15:27:53 kappaccd kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
Feb 24 15:27:53 kappaccd kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Feb 24 15:27:53 kappaccd kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Feb 24 15:27:53 kappaccd kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Feb 24 15:27:53 kappaccd kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Feb 24 15:27:53 kappaccd kernel: Enabling APIC mode: Flat. Using 1 I/O APICs
Feb 24 15:27:53 kappaccd kernel: Using ACPI (MADT) for SMP configuration information
Feb 24 15:27:53 kappaccd kernel: Allocating PCI resources starting at 3c000000 (gap: 3c000000:c3780000)
Feb 24 15:27:53 kappaccd kernel: Built 1 zonelists
Feb 24 15:27:53 kappaccd kernel: Kernel command line: root=/dev/sda1 ro ramdisk_size=100000 lang=us apm=power-off nomce vga=791
Feb 24 15:27:53 kappaccd kernel: Initializing CPU#0
Feb 24 15:27:53 kappaccd kernel: PID hash table entries: 4096 (order: 12, 65536 bytes)
Feb 24 15:27:53 kappaccd kernel: Detected 3201.577 MHz processor.
Feb 24 15:27:53 kappaccd kernel: Using pmtmr for high-res timesource
Feb 24 15:27:53 kappaccd kernel: Console: colour dummy device 80x25
Feb 24 15:27:53 kappaccd kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Feb 24 15:27:53 kappaccd kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Feb 24 15:27:53 kappaccd kernel: Memory: 964484k/982720k available (1882k kernel code, 17548k reserved, 999k data, 296k init, 65216k highmem)
Feb 24 15:27:53 kappaccd kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
Feb 24 15:27:53 kappaccd kernel: Security Framework v1.0.0 initialized
Feb 24 15:27:53 kappaccd kernel: SELinux: Disabled at boot.
Feb 24 15:27:53 kappaccd kernel: Mount-cache hash table entries: 512
Feb 24 15:27:53 kappaccd kernel: monitor/mwait feature present.
Feb 24 15:27:53 kappaccd kernel: using mwait in idle threads.
Feb 24 15:27:53 kappaccd kernel: CPU: Trace cache: 12K uops, L1 D cache: 16K
Feb 24 15:27:53 kappaccd kernel: CPU: L2 cache: 2048K
Feb 24 15:27:53 kappaccd kernel: CPU: Physical Processor ID: 0
Feb 24 15:27:53 kappaccd kernel: Enabling fast FPU save and restore... done.
Feb 24 15:27:53 kappaccd kernel: Enabling unmasked SIMD FPU exception support... done.
Feb 24 15:27:53 kappaccd kernel: Checking 'hlt' instruction... OK.
Feb 24 15:27:53 kappaccd kernel: Checking for popad bug... OK.
Feb 24 15:27:53 kappaccd kernel: CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 03
Feb 24 15:27:53 kappaccd kernel: Booting processor 1/1 eip 3000
Feb 24 15:27:53 kappaccd kernel: Initializing CPU#1
Feb 24 15:27:53 kappaccd kernel: monitor/mwait feature present.
Feb 24 15:27:53 kappaccd kernel: CPU: Trace cache: 12K uops, L1 D cache: 16K
Feb 24 15:27:53 kappaccd kernel: CPU: L2 cache: 2048K
Feb 24 15:27:53 kappaccd kernel: CPU: Physical Processor ID: 0
Feb 24 15:27:53 kappaccd kernel: CPU1: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 03
Feb 24 15:27:53 kappaccd kernel: Total of 2 processors activated (12697.60 BogoMIPS).
Feb 24 15:27:53 kappaccd kernel: ENABLING IO-APIC IRQs
Feb 24 15:27:53 kappaccd kernel: ..TIMER: vector=0x31 pin1=2 pin2=-1
Feb 24 15:27:53 kappaccd kernel: checking TSC synchronization across 2 CPUs: passed.
Feb 24 15:27:53 kappaccd kernel: Brought up 2 CPUs
Feb 24 15:27:53 kappaccd kernel: checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Feb 24 15:27:53 kappaccd kernel: Freeing initrd memory: 4514k freed
Feb 24 15:27:53 kappaccd kernel: NET: Registered protocol family 16
Feb 24 15:27:53 kappaccd kernel: EISA bus registered
Feb 24 15:27:53 kappaccd kernel: PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2
Feb 24 15:27:53 kappaccd kernel: PCI: Using MMCONFIG
Feb 24 15:27:53 kappaccd kernel: mtrr: v2.0 (20020519)
Feb 24 15:27:53 kappaccd kernel: ACPI: Subsystem revision 20050309
Feb 24 15:27:53 kappaccd kernel: ACPI: Interpreter enabled
Feb 24 15:27:53 kappaccd kernel: ACPI: Using IOAPIC for interrupt routing
Feb 24 15:27:53 kappaccd kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Feb 24 15:27:53 kappaccd kernel: PCI: Probing PCI hardware (bus 00)
Feb 24 15:27:53 kappaccd kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15), disabled.
Feb 24 15:27:53 kappaccd kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Feb 24 15:27:53 kappaccd kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
Feb 24 15:27:53 kappaccd kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
Feb 24 15:27:53 kappaccd kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Feb 24 15:27:53 kappaccd kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Feb 24 15:27:53 kappaccd kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Feb 24 15:27:53 kappaccd kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15), disabled.
Feb 24 15:27:53 kappaccd kernel: ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Feb 24 15:27:53 kappaccd kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Feb 24 15:27:53 kappaccd kernel: pnp: PnP ACPI init
Feb 24 15:27:53 kappaccd kernel: pnp: PnP ACPI: found 14 devices
Feb 24 15:27:53 kappaccd kernel: PnPBIOS: Disabled by ACPI PNP
Feb 24 15:27:53 kappaccd kernel: SCSI subsystem initialized
Feb 24 15:27:53 kappaccd kernel: PCI: Using ACPI for IRQ routing
Feb 24 15:27:53 kappaccd kernel: PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Feb 24 15:27:53 kappaccd kernel: pnp: 00:0b: ioport range 0xc00-0xc0f has been reserved
Feb 24 15:27:53 kappaccd kernel: pnp: 00:0b: ioport range 0xd00-0xd0f has been reserved
Feb 24 15:27:53 kappaccd kernel: pnp: 00:0b: ioport range 0xa20-0xa2f has been reserved
Feb 24 15:27:53 kappaccd kernel: pnp: 00:0b: ioport range 0xa30-0xa3f has been reserved
Feb 24 15:27:53 kappaccd kernel: audit: initializing netlink socket (disabled)
Feb 24 15:27:53 kappaccd kernel: highmem bounce pool size: 64 pages
Feb 24 15:27:53 kappaccd kernel: Total HugeTLB memory allocated, 0
Feb 24 15:27:53 kappaccd kernel: VFS: Disk quotas dquot_6.5.1
Feb 24 15:27:53 kappaccd kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Feb 24 15:27:53 kappaccd kernel: Initializing Cryptographic API
Feb 24 15:27:53 kappaccd kernel: vesafb: framebuffer at 0xa0000000, mapped to 0xf8880000, using 3072k, total 65536k
Feb 24 15:27:53 kappaccd kernel: vesafb: mode is 1024x768x16, linelength=2048, pages=41
Feb 24 15:27:53 kappaccd kernel: vesafb: protected mode interface info at c000:5652
Feb 24 15:27:53 kappaccd kernel: vesafb: scrolling: redraw
Feb 24 15:27:53 kappaccd kernel: vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Feb 24 15:27:53 kappaccd kernel: Console: switching to colour frame buffer device 128x48
Feb 24 15:27:53 kappaccd kernel: fb0: VESA VGA frame buffer device
Feb 24 15:27:53 kappaccd kernel: isapnp: Scanning for PnP cards...
Feb 24 15:27:53 kappaccd kernel: isapnp: No Plug & Play device found
Feb 24 15:27:53 kappaccd kernel: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
Feb 24 15:27:53 kappaccd kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Feb 24 15:27:53 kappaccd kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Feb 24 15:27:53 kappaccd kernel: io scheduler noop registered
Feb 24 15:27:53 kappaccd kernel: io scheduler anticipatory registered
Feb 24 15:27:53 kappaccd kernel: io scheduler deadline registered
Feb 24 15:27:53 kappaccd kernel: io scheduler cfq registered
Feb 24 15:27:53 kappaccd kernel: Floppy drive(s): fd0 is 1.44M
Feb 24 15:27:53 kappaccd kernel: FDC 0 is a post-1991 82077
Feb 24 15:27:53 kappaccd kernel: RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize
Feb 24 15:27:53 kappaccd kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Feb 24 15:27:53 kappaccd kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Feb 24 15:27:53 kappaccd kernel: ALI15X3: IDE controller at PCI slot 0000:00:1f.0
Feb 24 15:27:53 kappaccd kernel: ACPI: PCI Interrupt 0000:00:1f.0[A] -> GSI 21 (level, low) -> IRQ 21
Feb 24 15:27:53 kappaccd kernel: ALI15X3: chipset revision 199
Feb 24 15:27:53 kappaccd kernel: ALI15X3: not 100%% native mode: will probe irqs later
Feb 24 15:27:53 kappaccd kernel: ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio
Feb 24 15:27:53 kappaccd kernel: ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:pio, hdd:pio
Feb 24 15:27:53 kappaccd kernel: hda: HL-DT-ST DVDRAM GSA-4167B, ATAPI CD/DVD-ROM drive
Feb 24 15:27:53 kappaccd kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Feb 24 15:27:53 kappaccd kernel: hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
Feb 24 15:27:53 kappaccd kernel: Uniform CD-ROM driver Revision: 3.20
Feb 24 15:27:53 kappaccd kernel: PCI: Enabling device 0000:00:1f.1 (0105 -> 0107)
Feb 24 15:27:53 kappaccd kernel: ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 21 (level, low) -> IRQ 21
Feb 24 15:27:53 kappaccd kernel: ata1: SATA max UDMA/133 cmd 0xEC00 ctl 0xE482 bmdma 0xE000 irq 21
Feb 24 15:27:53 kappaccd kernel: ata2: SATA max UDMA/133 cmd 0xE400 ctl 0xE082 bmdma 0xE008 irq 21
Feb 24 15:27:53 kappaccd kernel: ata3: SATA max UDMA/133 cmd 0xEC08 ctl 0xE486 bmdma 0xE010 irq 21
Feb 24 15:27:53 kappaccd kernel: ata4: SATA max UDMA/133 cmd 0xE408 ctl 0xE086 bmdma 0xE018 irq 21
Feb 24 15:27:53 kappaccd kernel: ata1: dev 0 ATA, max UDMA/133, 390721968 sectors: lba48
Feb 24 15:27:53 kappaccd kernel: ata1: dev 0 configured for UDMA/133
Feb 24 15:27:53 kappaccd kernel: scsi0 : sata_uli
Feb 24 15:27:53 kappaccd kernel: ata2: dev 0 ATA, max UDMA/133, 390721968 sectors: lba48
Feb 24 15:27:53 kappaccd kernel: ata2: dev 0 configured for UDMA/133
Feb 24 15:27:53 kappaccd kernel: scsi1 : sata_uli
Feb 24 15:27:53 kappaccd kernel: ata3: no device found (phy stat 00000000)
Feb 24 15:27:53 kappaccd kernel: scsi2 : sata_uli
Feb 24 15:27:53 kappaccd kernel: ata4: no device found (phy stat 00000000)
Feb 24 15:27:53 kappaccd kernel: scsi3 : sata_uli
Feb 24 15:27:53 kappaccd kernel: Vendor: ATA Model: ST3200827AS Rev: 3.AA
Feb 24 15:27:53 kappaccd kernel: Type: Direct-Access ANSI SCSI revision: 05
Feb 24 15:27:53 kappaccd kernel: Vendor: ATA Model: ST3200827AS Rev: 3.AA
Feb 24 15:27:53 kappaccd kernel: Type: Direct-Access ANSI SCSI revision: 05
Feb 24 15:27:53 kappaccd kernel: SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB)
Feb 24 15:27:53 kappaccd kernel: SCSI device sda: drive cache: write back
Feb 24 15:27:53 kappaccd kernel: SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB)
Feb 24 15:27:53 kappaccd kernel: SCSI device sda: drive cache: write back
Feb 24 15:27:53 kappaccd kernel: sda: sda1 sda2 sda3
Feb 24 15:27:53 kappaccd kernel: Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Feb 24 15:27:53 kappaccd kernel: SCSI device sdb: 390721968 512-byte hdwr sectors (200050 MB)
Feb 24 15:27:53 kappaccd kernel: SCSI device sdb: drive cache: write back
Feb 24 15:27:53 kappaccd kernel: SCSI device sdb: 390721968 512-byte hdwr sectors (200050 MB)
Feb 24 15:27:53 kappaccd kernel: SCSI device sdb: drive cache: write back
Feb 24 15:27:53 kappaccd kernel: sdb: sdb1
Feb 24 15:27:53 kappaccd kernel: Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
Feb 24 15:27:53 kappaccd kernel: mice: PS/2 mouse device common for all mice
Feb 24 15:27:53 kappaccd kernel: EISA: Probing bus 0 at eisa.0
Feb 24 15:27:53 kappaccd kernel: Cannot allocate resource for EISA slot 4
Feb 24 15:27:53 kappaccd kernel: EISA: Detected 0 cards.
Feb 24 15:27:53 kappaccd kernel: NET: Registered protocol family 2
Feb 24 15:27:53 kappaccd kernel: IP: routing cache hash table of 4096 buckets, 64Kbytes
Feb 24 15:27:53 kappaccd kernel: TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
Feb 24 15:27:53 kappaccd kernel: TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
Feb 24 15:27:53 kappaccd kernel: TCP: Hash tables configured (established 131072 bind 65536)
Feb 24 15:27:53 kappaccd kernel: NET: Registered protocol family 1
Feb 24 15:27:53 kappaccd kernel: NET: Registered protocol family 15
Feb 24 15:27:53 kappaccd kernel: Starting balanced_irq
Feb 24 15:27:53 kappaccd kernel: ACPI wakeup devices:
Feb 24 15:27:53 kappaccd kernel: PCE2 PCE3 PCE4 PCE5 PCE6 PCE7 PE2P SLT1 SLT2 PS2K PS2M UAR1 LAN USB0 USB1 USB2 UB20 AC97 AZAL
Feb 24 15:27:53 kappaccd kernel: ACPI: (supports S0 S1 S3 S4 S5)
Feb 24 15:27:53 kappaccd kernel: RAMDISK: Compressed image found at block 0
Feb 24 15:27:53 kappaccd kernel: VFS: Mounted root (ext2 filesystem).
Feb 24 15:27:53 kappaccd kernel: Freeing unused kernel memory: 296k freed
Feb 24 15:27:53 kappaccd kernel: input: AT Translated Set 2 keyboard on isa0060/serio0
Feb 24 15:27:53 kappaccd kernel: usbcore: registered new driver usbfs
Feb 24 15:27:53 kappaccd kernel: usbcore: registered new driver hub
Feb 24 15:27:53 kappaccd kernel: USB Universal Host Controller Interface driver v2.2
Feb 24 15:27:53 kappaccd kernel: ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
Feb 24 15:27:53 kappaccd kernel: ohci_hcd 0000:00:1c.0: ALi Corporation USB 1.1 Controller
Feb 24 15:27:53 kappaccd kernel: ohci_hcd 0000:00:1c.0: new USB bus registered, assigned bus number 1
Feb 24 15:27:53 kappaccd kernel: ohci_hcd 0000:00:1c.0: irq 17, io mem 0xdfffc000
Feb 24 15:27:53 kappaccd kernel: hub 1-0:1.0: USB hub found
Feb 24 15:27:53 kappaccd kernel: hub 1-0:1.0: 3 ports detected
Feb 24 15:27:53 kappaccd kernel: ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 18 (level, low) -> IRQ 18
Feb 24 15:27:53 kappaccd kernel: ohci_hcd 0000:00:1c.1: ALi Corporation USB 1.1 Controller (#2)
Feb 24 15:27:53 kappaccd kernel: ohci_hcd 0000:00:1c.1: new USB bus registered, assigned bus number 2
Feb 24 15:27:53 kappaccd kernel: ohci_hcd 0000:00:1c.1: irq 18, io mem 0xdfffd000
Feb 24 15:27:53 kappaccd kernel: logips2pp: Detected unknown logitech mouse model 99
Feb 24 15:27:53 kappaccd kernel: hub 2-0:1.0: USB hub found
Feb 24 15:27:53 kappaccd kernel: hub 2-0:1.0: 3 ports detected
Feb 24 15:27:53 kappaccd kernel: ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 19 (level, low) -> IRQ 19
Feb 24 15:27:53 kappaccd kernel: ohci_hcd 0000:00:1c.2: ALi Corporation USB 1.1 Controller (#3)
Feb 24 15:27:53 kappaccd kernel: ohci_hcd 0000:00:1c.2: new USB bus registered, assigned bus number 3
Feb 24 15:27:53 kappaccd kernel: ohci_hcd 0000:00:1c.2: irq 19, io mem 0xdfffe000
Feb 24 15:27:53 kappaccd kernel: input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1
Feb 24 15:27:53 kappaccd kernel: hub 3-0:1.0: USB hub found
Feb 24 15:27:53 kappaccd kernel: hub 3-0:1.0: 3 ports detected
Feb 24 15:27:53 kappaccd kernel: Initializing USB Mass Storage driver...
Feb 24 15:27:53 kappaccd kernel: usb 1-2: new full speed USB device using ohci_hcd and address 2
Feb 24 15:27:53 kappaccd kernel: usbcore: registered new driver usb-storage
Feb 24 15:27:53 kappaccd kernel: USB Mass Storage support registered.
Feb 24 15:27:53 kappaccd kernel: sbp2: $Rev: 1219 $ Ben Collins <[email protected]>
Feb 24 15:27:53 kappaccd kernel: cloop: Initializing cloop v2.02
Feb 24 15:27:53 kappaccd kernel: cloop: loaded (max 8 devices)
Feb 24 15:27:53 kappaccd kernel: Real Time Clock Driver v1.12
Feb 24 15:27:53 kappaccd kernel: ACPI: Power Button (FF) [PWRF]
Feb 24 15:27:53 kappaccd kernel: ACPI: Processor [CPU1] (supports 8 throttling states)
Feb 24 15:27:53 kappaccd kernel: Linux Kernel Card Services
Feb 24 15:27:53 kappaccd kernel: options: [pci] [cardbus] [pm]
Feb 24 15:27:53 kappaccd kernel: usbcore: registered new driver hiddev
Feb 24 15:27:53 kappaccd kernel: usbcore: registered new driver usbhid
Feb 24 15:27:53 kappaccd kernel: drivers/usb/input/hid-core.c: v2.01:USB HID core driver
Feb 24 15:27:53 kappaccd kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 14 ports, IRQ sharing disabled
Feb 24 15:27:53 kappaccd kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Feb 24 15:27:53 kappaccd kernel: ali1535_smbus 0000:00:1e.1: ALI1535_smb region uninitialized - upgrade BIOS?
Feb 24 15:27:53 kappaccd kernel: ali1535_smbus 0000:00:1e.1: ALI1535 not detected, module not inserted.
Feb 24 15:27:53 kappaccd kernel: Linux Tulip driver version 1.1.13 (May 11, 2002)
Feb 24 15:27:53 kappaccd kernel: ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 20 (level, low) -> IRQ 20
Feb 24 15:27:53 kappaccd kernel: tulip0: Old style EEPROM with no media selection information.
Feb 24 15:27:53 kappaccd kernel: tulip0: MII transceiver #1 config 3100 status 786d advertising 01e1.
Feb 24 15:27:53 kappaccd kernel: eth0: ULi M5261/M5263 rev 80 at 0001e800, EEPROM not present, 00:4C:69:6E:75:79, IRQ 20.
Feb 24 15:27:53 kappaccd kernel: Linux agpgart interface v0.101 (c) Dave Jones
Feb 24 15:27:53 kappaccd kernel: kjournald starting. Commit interval 5 seconds
Feb 24 15:27:53 kappaccd kernel: EXT3-fs: mounted filesystem with ordered data mode.
Feb 24 15:27:53 kappaccd kernel: Warning: /proc/ide/hd?/settings interface is obsolete, and will be removed soon!
Feb 24 15:27:53 kappaccd kernel: EXT3 FS on sda1, internal journal
Feb 24 15:27:53 kappaccd kernel: Adding 1534196k swap on /dev/sda2. Priority:-1 extents:1
Feb 24 15:27:53 kappaccd kernel: EXT3 FS on sda1, internal journal
Feb 24 15:27:53 kappaccd kernel: ttyS1: LSR safety check engaged!
Feb 24 15:27:53 kappaccd kernel: ttyS1: LSR safety check engaged!
Feb 24 15:27:53 kappaccd kernel: kjournald starting. Commit interval 5 seconds
Feb 24 15:27:53 kappaccd kernel: EXT3 FS on sda3, internal journal
Feb 24 15:27:53 kappaccd kernel: EXT3-fs: mounted filesystem with ordered data mode.
Feb 24 15:27:53 kappaccd kernel: kjournald starting. Commit interval 5 seconds
Feb 24 15:27:53 kappaccd kernel: EXT3 FS on sdb1, internal journal
Feb 24 15:27:53 kappaccd kernel: EXT3-fs: mounted filesystem with ordered data mode.
Feb 24 15:27:53 kappaccd kernel: Registering unionfs 20050921-1517
Feb 24 15:27:53 kappaccd kernel: NET: Registered protocol family 17
Feb 24 15:27:53 kappaccd kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Feb 24 15:27:53 kappaccd kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Feb 24 15:27:53 kappaccd kernel: ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 23
Feb 24 15:27:53 kappaccd kernel: ehci_hcd 0000:00:1c.3: ALi Corporation USB 2.0 Controller
Feb 24 15:27:53 kappaccd kernel: ehci_hcd 0000:00:1c.3: debug port 1
Feb 24 15:27:53 kappaccd kernel: ehci_hcd 0000:00:1c.3: new USB bus registered, assigned bus number 4
Feb 24 15:27:53 kappaccd kernel: ehci_hcd 0000:00:1c.3: irq 23, io mem 0xdffff800
Feb 24 15:27:53 kappaccd kernel: ehci_hcd 0000:00:1c.3: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
Feb 24 15:27:53 kappaccd kernel: hub 4-0:1.0: USB hub found
Feb 24 15:27:53 kappaccd kernel: hub 4-0:1.0: 8 ports detected
Feb 24 15:27:53 kappaccd kernel: usb 1-2: USB disconnect, address 2
Feb 24 15:27:53 kappaccd kernel: usb 1-2: new full speed USB device using ohci_hcd and address 3
Feb 24 15:27:53 kappaccd kernel: drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1004
Feb 24 15:27:53 kappaccd kernel: usbcore: registered new driver usblp
Feb 24 15:27:53 kappaccd kernel: drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Feb 24 15:27:53 kappaccd kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Feb 24 15:27:53 kappaccd kernel: ts: Compaq touchscreen protocol output
Feb 24 15:27:54 kappaccd kernel: lp: driver loaded but no devices found
Feb 24 15:27:57 kappaccd kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
Feb 24 15:27:57 kappaccd kernel: apm: disabled - APM is not SMP safe.
Feb 24 15:29:01 kappaccd kernel: Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
Feb 24 15:29:01 kappaccd kernel: Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 0
/home/javiergp>