After knoppix shutdown system is dead??????

Printable View

04-24-2007, 04:37 AM
robb01

After knoppix shutdown system is dead??????

OK, I ran knoppix 5.1.0-en from cd and it worked great. I shut the system down and now my machine won't turn back on. Any ideas what could cause this?

Only thing I did before booting knoppix was change bios settings boot sequence to "boot from cdrom" as option 1 and boot from hd C as option 2. After logging knoppix off and removing cd I tried to restart the computer but it is frozen. I am stuck. It should have booted to windows right? Now it won't turn on at all. Everything was working fine prior to using knoppix live cd, during use of knoppix, but why won't the machine turn back on? It's driving me nuts.

system info:
Dell dimension 8110
Intel celeron 2.34ghz
windows xp home

Any help would be greatly appreciated
04-24-2007, 05:04 AM
robb01

Forgot some details that might help. When I say system is dead I mean system is dead. When power is turned on I can hear cooling fan turn on for 1 - 2 seconds then machine is dead. Just the orange stand-bye light flashing on the tower.
04-24-2007, 11:46 PM
cbagger01

Quote:

Originally Posted by robb01

Forgot some details that might help. When I say system is dead I mean system is dead. When power is turned on I can hear cooling fan turn on for 1 - 2 seconds then machine is dead. Just the orange stand-bye light flashing on the tower.

Try unplugging the machine and let it sit for 5-10 minutes. Then plug it back in and try to boot it up.

Hopefully you can at least get to the BIOS screen. Otherwise you might have some kind of hardware problem that needs investigation. The OS does not boot up until after the BIOS screen is shown so it is unlikely that the problem is related to MS Windows or anything on your hard drive.

Maybe one of your cables has a loose connection. Usually if you have a critical error, a Dell PC will give a series of "beep" sounds upon initial power up. You can go to the Dell web site and read the manual for your PC to decode these beeps.

If you don't even get to the initial BIOS screen or to the "beep" sounds then it is likely that you have a power supply problem.