Alsa issue: how to make it work after rebooting

Hi people,

This is my first post. I consider myself a newbie in Linux, but in general I can solve the problems by googling (which almost always ends up in this forum). For this strange problem I couldn't find out how to solve it.

Let's start. I have a knoppix, kernel version 2.6.19, installed on my hdd. Everything started when I noticed that flash animations on webpages don't play any sound, although I can hear sounds in other applications. Then I found out that flash plugin was compiled to work with alsa instead of oss. So, I just tried to know what was going on with alsa on my computer. When executed amixer, I get:

Code:

---

amixer: Mixer attach default error: No such device

---

After reading, googling and so on, I executed alsaconf to configure sound. So, after that I got

Code:

---

Running update-modules... Loading driver... Usage: /etc/init.d/alsa {unload|reload|force-unload|force-reload|suspend|resume}Setting default volumes... amixer: Mixer attach default error: No such device =============================================================================== Now ALSA is ready to use. For adjustment of volumes, use your favorite mixer. Have a lot of fun!

---

with no sound.

I remembered that the sound module was snd-cmipci, so I loaded it with modprobe. Sound was back! but when I execute amixer (or, rather, any application that uses alsa) I get that 'no sound card is installed'.

I repeat many times this, and the only way to get (non-alsa) sound is by manually loading the module.

What I did was to reinstall alsa-related packages. So, I executed

Code:

---

apt-get install --reinstall alsa-base

---

And, surprise!: alsaconf configured properly my soundcard! The consequence is that alsa-applications can play sounds! Great!

But when I restart my system, everything goes back to the beginning. The only way to get alsa system to work is by reinstalling it and running alsaconf afterwards (in this order).

btw, alsa-utils,base,all-other-alsa-related-packages version is 1.0.14-1

Any clue to make it work forever?

Thanks in advance for your help.

use this command to fix your alsa:

(as root)
dpkg-reconfigure alsa-base



You can add this to the very end of /etc/init.d/knoppix-hd-autoconfigure:

dpkg-reconfigure alsa-base >/dev/null 2>&1




OR:.... Use my script.

reconfigure_alsa.sh

Code:

---


#!/bin/sh
#
# Ripped straight from postinst in the alsa-base package.
#
[ "$UID" != "0" ] && echo "Must be run as root!" && exit 1

echo "Configuring ALSA..."

set -e

MYNAME="$0"

# $* message
warn() { echo "${MYNAME}: Warning: $*" >&2 ; }

# $* message
report_error() { echo "${MYNAME}: Error: $*" >&2 ; }

devfs_is_active()
{
        test -e /dev/.devfsd
}

kernel_is_2_6_or_above()
{
        case "$(uname -r)" in
                1.*|2.[012345]*) return 1 ;;
                *) return 0 ;;
        esac
}

udev_is_active()
{
        test -e /dev/.udev.tdb || test -d /dev/.udevdb || return 1
        kernel_is_2_6_or_above || return 1
        return 0
}


if [ -d /etc/sound ]; then
rmdir /etc/sound 2> /dev/null || :
fi

rm -f \
        /etc/apm/event.d/alsa \
        /etc/apm/event.d/alsa.dpkg-old \
        /etc/default/alsa.debconf-backup \
        /etc/devfs/conf.d/alsa \
        /etc/discover.conf.d/10alsa \
        /etc/discover.conf.d/10alsa.dpkg-old \
        /etc/alsa/alsa-base.conf \
        /etc/alsa/modutils/0.5 \
        /etc/alsa/modutils/0.9 \
        /etc/alsa/modutils/1.0 \
        /etc/alsa/modutils/0.5.debconf-backup \
        /etc/alsa/modutils/0.9.debconf-backup \
        /etc/alsa/modutils/1.0.debconf-backup \
        /etc/alsa/modprobe-post-install.d/alsa-base \
        /etc/alsa/modprobe-post-install.d/alsa-base.dpkg-old \
        /etc/modutils/alsa \
        /etc/modutils/alsa-path \
        /etc/modprobe.d/alsa

# Delete hotplug blacklist backup file since hotplug doesn't ignore
# it as it should (#299205)
rm -f /etc/hotplug/blacklist.d/alsa-base.dpkg-old

# Delete obsolete rc symlinks to alsa init.d script
# (update-rc.d produces an unnecessary warning message on stderr (see #164471) so print the error message only if its error status is nonzero)
STDERR="$(update-rc.d -f alsa remove 2>&1 >/dev/null)" || echo "Warning: 'update-rc.d -f alsa remove' reported: '$STDERR'." >&2
# Update modutils config
[ "$(which update-modules 2>/dev/null)" ] && update-modules >/dev/null || :

# Decide which conf file to read
conf_file=""
if [ -f /etc/default/alsa ] ; then
        conf_file=/etc/default/alsa
elif [ -f /usr/share/alsa-base/alsa.default ] ; then
        conf_file=/usr/share/alsa-base/alsa.default
else
        report_error "No configuration file found"
        exit 1
fi

        # Read variables from conf file
force_unload_modules_before_suspend="$(
        . "$conf_file" >/dev/null 2>&1
        echo "$force_unload_modules_before_suspend"
)"
# Write new conf file
cat /usr/share/alsa-base/alsa.default | sed \
        -e "s/force_unload_modules_before_suspend=.*/force_unload_modules_before_suspend=\"${force_unload_modules_before_suspend}\"/" \
        > /etc/default/alsa
# Run snddevices if required
# We ignore #309581 "Creating devices not using MAKEDEV violates policy 10.6"
make_snddevices() { /usr/share/alsa-base/snddevices --no-wipe --owner=root.audio "$@" >/dev/null ; }
if devfs_is_active ; then
        # devfs /dev/
        # Run update-devfsd because we have eliminated the devfsd configuration file
        [ "$(which update-devfsd 2>/dev/null)" ] && update-devfsd
else
        if ! udev_is_active || [ "$WRITE_ON_UDEV" ] ; then
                # static /dev/ or udev-controlled /dev/ that we should write on
                [ -d /dev/snd ] || make_snddevices
        else
                # udev-controlled /dev/ which we shouldn't overwrite
                if [ -d /dev/.static/dev ] && [ -e /proc/mounts ] && grep -qE '^[^ ]+ /dev/\.static/dev' /proc/mounts ; then
                        [ -d /dev/.static/dev/snd ] || make_snddevices --dev-dir=/dev/.static/dev > /dev/null
                elif [ -d /.dev ] && [ -e /proc/mounts ] && grep -qE '^[^ ]+ /\.dev' /proc/mounts ; then
                        [ -d /.dev/snd ] || make_snddevices --dev-dir=/.dev > /dev/null
                fi
        fi
fi
# Set up apm symlinks
[ -f /etc/apm/scripts.d/alsa ] || warn "/etc/apm/scripts.d/alsa is absent"
# $1: file to check
already_linked_to_alsa()
{
        [ "$1" ] || return 1
        [ -L "$1" ] || return 1
        [ "$(basename "$(readlink "$1")")" = alsa ] || return 1
        return 0
}

ALREADY_LINKED=no
for F in /etc/apm/suspend.d/??alsa ; do
        already_linked_to_alsa "$F" && ALREADY_LINKED=yes && break
done
[ "$ALREADY_LINKED" = yes ] || ln -sf ../scripts.d/alsa /etc/apm/suspend.d/80alsa
ALREADY_LINKED=no
for F in /etc/apm/resume.d/??alsa ; do
        already_linked_to_alsa "$F" && ALREADY_LINKED=yes && break
done
[ "$ALREADY_LINKED" = yes ] || ln -sf ../scripts.d/alsa /etc/apm/resume.d/20alsa


exit 0

---

(as root)
Copy the above text and paste into a new file named: /etc/init.d/reconfigure_alsa.sh ...

Then issue (as root): ln -s /etc/init.d/reconfigure_alsa.sh /etc/rcS.d/S10reconfigure_alsa


Reboot :)


Take Care,
-Justin
One Mynds Eye

The first suggestion didn't work. The second did, but the it takes some time at boot time. Does anybody know why I/we have to do this?

I just tried the sound in flash animations and it doesn't work :( I think I'll spend some more days to find out what's going on...