Remaster knoppix V6.2.1 - Remove LXDE install KDE

Hoping I'll not the only one who wants to use V6.2.1 but needs KDE

I am posting my knoppix v6.2.1. remove LXDE and add KDE re-mastering scripts.
Beware this is very much a wip with many trial and errors merely remarked out.
The other point that I need to make is that some of my listed steps may thus prove unnecessary.

The scripts are developed from my V5.3 scripts based on the info from the wiki re-mastering site.
Three scripts install1, install2 & install3.
sda3 holds all additional files and sda4 is where all the re-mastering takes place.
Boot from v6.2.1 cd, have the scripts previously copied to fdd, mount fdd, copy them to / and run ./install1.sh

There are a couple of pre-requisits:
Additional files required on sda3
startx-startkde-start_kdeinit-start_kdeinit_wrapper from v5.3
dpkg.deb (see later)

Add your nameserver IP ( and route info if required )in install2.sh etc, I never got around to putting into a variable

Note
1 - My first re-master into KDE all of my menu entries running as user root a pop-up box would ask for root password. Although I googled and tried many things in the end as a work around I changed my user from knoppix to root. This is option 3 in my install1 menu

2 - Option 2 removes LXDE and installs KDE. I was forced to downgrade dpkg prior to installing KDE.
I feel this will give me problems in the future, does anyone know a way around this?

3 - Is the lenny-backports the correct place to install KDE from?

4 - Nothing was working in my chroot until I added to install2:
/etc/init.d/dbus start
/etc/init.d/acpid start
Does this sound correct, should I add others?
I tried adding hal but it failed.

5 - Kwite displays a blank page when loading files from my samba share, yet fine when I copy
the same file to my home directory and then re-open it, it is then OK.

6 - Same script does not work on V6.2 but in structure they look very sinilar.

7 - Finally, cannot get V6.2.1 ( original or re-mastered) to pxe connecting to an NFS share.
V6.2 does work however. Thankfully ruymbeke's customised miniroot does work for V6.2.1
over a CIFS share. More info here:
http://knoppix.net/forum/threads/115...ot.ini)/page61

Here are my scripts (please let me know if there is a better way of posting code):
UPDATE scripts to follow in following posts due to exceeding character limit

Now I know there must be a better way to post these scripts, please advise.
Here is part1 of install1.shh, hit character limit again
========
#!/bin/bash

#Functions

mainmenu()
{
clear
echo
echo "Eaf Knoppix 6.2.1 RE-Master + KDE Menu - Boots via isolinux"
echo "-------------------------------------------------------------------------"
echo "1 - Quick UK lang & KDE image update -(Big KNOPPIX file untouched) "
echo "2 - Remove lxde & install kde. No startx"
echo "3 - Change default user between knoppix & root"
echo "4 - Update Build - Open into chroot KDE for further remastering"
echo "5 - Update Existing HDD Build - No format or CD copy"
echo "-------------------------------------------------------------------------"
echo "Current variables"
echo "-------------------"
echo "Targetpath=${targetpath} - External file path=/media/${extfilepath} "
echo "-------------------------------------------------------------------------"
echo "C - Change variables"
echo "F - Format ${targetpath}"
echo "X - Exit"
echo "-------------------------------------------------------------------------"
echo
read input>/dev/null

case ${input} in
1) quickbld; bldiso;;
2) basebld ${input}; chroot2 ${input};;
3) setuser; mainmenu;;
4) basebld ${input}; chroot2 ${input};;
5) basebld ${input}; chroot2 ${input};;
[cC]) update;;
[fF]) format ${input};;
[Xx]) exit;;
[Yy]) ;;
*) echo; read -p "Invailid Option"; testmenu;;
esac
mainmenu
exit
}
###
quickbld()
{
echo "You selected option 1, do you want to continue ?"
echo "(Y)es or (N)o"
read confirm
case $confirm in
[Nn]) unset confirm; return;;
esac

cd ${targetpath}
echo "Please wait coping files...."
cp -Rp /cdrom knoppix
chmod +w -R knoppix

# 3. Edit the isolinux.cfg to make the default language "us":
echo "Deleting unneccessary files...."
if [ -f knoppix/autorun* ]; then rm knoppix/autorun*;fi
if [ -f knoppix/index.html ]; then rm knoppix/index.html;fi
if [ -f knoppix/boot/isolinux/german.kbd ]; then rm knoppix/boot/isolinux/german.kbd;fi
if [ -f knoppix/KNOPPIX/index* ]; then rm /knoppix/KNOPPIX/index*;fi
if [ -f knoppix/KNOPPIX/KNOPPIX-FAQ-ES.txt ]; then rm /knoppix/KNOPPIX/KNOPPIX-FAQ-ES.txt;fi
if [ -f knoppix/KNOPPIX/KNOPPIX-FAQ-FR.txt ]; then rm /knoppix/KNOPPIX/KNOPPIX-FAQ-FR.txt;fi
if [ -f knoppix/KNOPPIX/KNOPPIX-FAQ-IT.txt ]; then rm /knoppix/KNOPPIX/KNOPPIX-FAQ-IT.txt;fi
if [ -f knoppix/KNOPPIX/KNOPPIX-FAQ-NL.txt ]; then rm /knoppix/KNOPPIX/KNOPPIX-FAQ-NL.txt;fi
if [ -f knoppix/KNOPPIX/KNOPPIX-FAQ.txt ]; then rm /knoppix/KNOPPIX/KNOPPIX-FAQ.txt;fi

echo "Updating files...."
\cp /media/${extfilepath}/EafBuildImages/background.jpg knoppix/KNOPPIX
\cp /media/${extfilepath}/EafBuildImages/knoppix-header.jpg knoppix/KNOPPIX/images
if [ -f /media/${extfilepath}/EafBuildFiles/V6.2.1/boot.msg ]; then
\cp /media/${extfilepath}/EafBuildFiles/V6.2.1/boot.msg knoppix/boot/isolinux
fi
if [ -f /media/${extfilepath}/EafBuildFiles/V6.2.1/isolinux.cfg ]; then
\cp /media/${extfilepath}/EafBuildFiles/V6.2.1/isolinux.cfg knoppix/boot/isolinux
fi
cd knoppix
}
###
bldiso()
{
# Regen md5sums:

echo "Pleae wait regenerating the md5sums"
find -type f -not -name md5sums -not -name boot.cat -not -name isolinux.bin -exec md5sum '{}' \; > KNOPPIX/md5sums
cd ..


# Make ISO
echo "Pleae wait making the iso image"
genisoimage -pad -l -r -J -v -V "KNOPPIX" -no-emul-boot -boot-load-size 4 -boot-info-table -b boot/isolinux/isolinux.bin -c boot/isolinux/boot.cat -hide-rr-moved -o knoppix.iso knoppix

echo
echo Size of finished iso is:
ls -lh knoppix.iso
echo
echo Script finished,the ISO is stored in ${targetpath}knoppix.iso
read -p "Press any key to end"
}
####
setuser()
{
while :
do
echo "------------------------------------------------"
echo "Select user"
echo "------------------------------------------------"
echo "1 - knoppix"
echo "2 - root"
echo "3 - Return to main menu"
echo "------------------------------------------------"
read confirm

case $confirm in
1) user="knoppix"; break;;
2) user="root"; break;;
3) unset confirm; return;;
*) read -p "Invalid selection, try again"; continue;;
esac
unset confirm
done
}
###
basebld()
{
clear
while :
do
echo "You selected option ${1}, do you want to continue ?"
echo "(Y)es or (N)o"
read confirm

case $confirm in
[Yy]) break;;
[Nn]) unset confirm; return;;
*) read -p "Invalid selection, try again"; continue;;
esac

unset confirm
done
if [ "${1}" != "5" ]; then
#Chose format or delete
format
#delknx

mkdir -p ${targetpath}/knx/tmp
mkdir -p ${targetpath}/knx/master/KNOPPIX
mkdir -p ${targetpath}/knx/source/KNOPPIX
cd ${targetpath}/knx

DATE=`date`
echo Copying files, please wait...
echo Start time $DATE, 1.8Ghz P4 this takes approx 8 minutes.
cp -Rp /KNOPPIX/* ${targetpath}/knx/source/KNOPPIX

cp -ar /mnt-system/boot ${targetpath}/knx/master/boot
# /cdrom directory does NOT exist in V6
cd /mnt-system && find . -size -10000k -type f -exec cp -p --parents '{}' ${targetpath}/knx/master/ \;
# Very clever, merely copies into master/KNOPPIX the directories, images & modules (including their files) and the correct file under the KNOPPIX directly. It ignores everything else!

# Update original CD boot menu
\cp /media/${extfilepath}/EafBuildFiles/V6.2.1/boot.msg ${targetpath}/knx/master/boot/isolinux
\cp /media/${extfilepath}/EafBuildFiles/V6.2.1/isolinux.cfg ${targetpath}/knx/master/boot/isolinux

fi
# Update modprobe.d
#\cp -Rp /media/${extfilepath}/EafBuildFiles/V6.2.1/etc/* ${targetpath}/knx/source/KNOPPIX/etc


if [ "${1}" = "2" ]; then
rm -f ${targetpath}/knx/source/KNOPPIX/var/cache/apt/archives/*.deb
\rm ${targetpath}/knx/source/KNOPPIX/var/lib/apt/lists/* >/dev/null 2>&1
#\cp /media/${extfilepath}/EafBuildFiles/V6.2.1/sources.list ${targetpath}/knx/source/KNOPPIX/etc/apt/sources.list

\cp ${targetpath}/knx/source/KNOPPIX/etc/apt/sources.list ${targetpath}/knx/source/KNOPPIX/etc/apt/sourcesORG.list
echo "deb http://www.backports.org/debian lenny-backports main contrib non-free" > ${targetpath}/knx/source/KNOPPIX/etc/apt/sources.list
echo "# Debian/Lenny is the stable base for this installation" >> ${targetpath}/knx/source/KNOPPIX/etc/apt/sources.list
echo "deb http://ftp.de.debian.org/debian stable main contrib non-free" >> ${targetpath}/knx/source/KNOPPIX/etc/apt/sources.list
echo "deb http://security.debian.org stable/updates main contrib non-free" >> ${targetpath}/knx/source/KNOPPIX/etc/apt/sources.list


#\cp /media/${extfilepath}/EafBuildFiles/V6.2.1/45knoppix ${targetpath}/knx/source/KNOPPIX/etc/X11/Xsession.d/45knoppix
\cp /media/${extfilepath}/EafBuildFiles/V6.2.1/startx* ${targetpath}/knx/source/KNOPPIX/etc/bin/
#startx-startkde-start_kdeinit-start_kdeinit_wrapper from v5.3
sed 's/lxde/kde/;s/LXDE/KDE/' -i ${targetpath}/knx/source/KNOPPIX/etc/X11/Xsession.d/45knoppix #Just the first match
# \cp /media/${extfilepath}/EafBuildFiles/V6.2.1/knoppix-startx ${targetpath}/knx/source/KNOPPIX/etc/init.d/knoppix-startx
sed 's/lxde/kde/g' -i ${targetpath}/knx/source/KNOPPIX/etc/init.d/knoppix-startx # all instances (2)
\cp /media/${extfilepath}/EafBuildFiles/V6.2.1/dpkg.deb ${targetpath}/knx/source/KNOPPIX/


#\cp -v /etc/resolv.conf ${targetpath}/knx/source/KNOPPIX/etc/resolv.conf

# Update wallpaper

\cp /media/${extfilepath}/EafBuildImages/knoppix.jpg ${targetpath}/knx/source/KNOPPIX/usr/local/lib
\cp /media/${extfilepath}/EafBuildImages/background.jpg ${targetpath}/knx/master/KNOPPIX/

# Update boot graphics
\cp /media/${extfilepath}/EafBuildImages/knoppix-24-1.jpg ${targetpath}/knx/master/KNOPPIX/images
\cp /media/${extfilepath}/EafBuildImages/knoppix-header.jpg ${targetpath}/knx/master/KNOPPIX/images

# Update previously saved config files
#\cp /media/${extfilepath}/EafBuildFiles/V6.2.1/45xsession* ${targetpath}/knx/source/KNOPPIX/etc/X11/Xsession.d
#\cp /media/${extfilepath}/EafBuildFiles/V6.2.1/knoppix-autoconfig ${targetpath}/knx/source/KNOPPIX/etc/init.d
#\cp /media/${extfilepath}/EafBuildFiles/V6.2.1/locale ${targetpath}/knx/source/KNOPPIX/etc/default

echo "b44" >> /etc/modules # WHY????
fi

\cp /media/${extfilepath}/EafBuildFiles/V6.2.1/xorg.conf ${targetpath}/knx/source/KNOPPIX/etc/X11/

# Stops rebooting when finished kde in chroot by replacing init 0
sed 's@/sbin/init 0@echo "/sbin/init 0"@' -i ${targetpath}/knx/source/KNOPPIX/etc/init.d/knoppix-startx

if [ -z "${user}" ]; then
grep 'USER="root"' <${targetpath}/knx/source/KNOPPIX/etc/init.d/knoppix-startx
if [ "${?}" -eq 0 ]; then
user=root
else
user=knoppix
fi
else
case "${user}" in
"knoppix")
sed 's/USER="root"/USER="knoppix"/;s/GROUP="root"/GROUP="knoppix"/' -i ${targetpath}/knx/source/KNOPPIX/etc/init.d/knoppix-startx;;
"root")
sed 's/USER="knoppix"/USER="root"/;s/GROUP="knoppix"/GROUP="root"/' -i ${targetpath}/knx/source/KNOPPIX/etc/init.d/knoppix-startx;;
esac
fi

cd ${targetpath}/knx

# NOTE: /dev gives error - wronmg fs type, bad option
mount --bind /dev ${targetpath}/knx/source/KNOPPIX/dev
mount --bind /proc ${targetpath}/knx/source/KNOPPIX/proc
mount --bind /sys ${targetpath}/knx/source/KNOPPIX/sys

DATE=`date`
echo
echo About to change root to KNOPPIX
echo chroot prompt will change to sh-3.1
echo
echo Finish time $DATE
echo

chmod 777 /install2.sh /install3.sh
\cp /install2.sh /install3.sh ${targetpath}/knx/source/KNOPPIX
echo
echo "About to chroot"
echo
chroot ${targetpath}/knx/source/KNOPPIX ./install2.sh ${1} ${extfilepath} ${targetpath} ${user}
echo

}

################################################## ################################################## #####
format()
{
umount -l /dev/${target} >/dev/null 2>&1
echo When in cfdisk do NOT make ${targetpath} bootable, otherwise a re-boot will be required.
echo
if [ "${1}" = "F" -o "${1}" = "f" ]; then
read -p "Partition drive prior to format? (Y)es,(N)o or (C)ancel " NEW_MASTER
case ${NEW_MASTER} in
[Yy]) cfdisk;; #echo>//dev/null
[Nn]) ;;
*) echo; echo "Test Cancelled"; exit;;
esac
fi

unset NEW_MASTER
echo Formatting /dev/${target}, please wait...
mkfs.ext3 /dev/${target}
#mount -t ext3 -rw /dev/${target} ${targetpath}
mount /dev/${target} ${targetpath}
}
################################################## ################################################## #####
delknx()
{
if [ -d ${targetpath}/knx ]; then
echo "Please wait deleting old build"
rm -rf ${targetpath}/knx/
fi
}
################################################## ################################################## #####
update()
{
echo "Current target path is ${targetpath}"
echo "Enter new path or just press return"
read temp1
if [ -n "${temp1}" ]; then
targetpath=${temp1}
mount ${targetpath}
fi
unset temp1

echo "Current external file path is ${extfilepath} - Do NOT enter the /media/"
echo "Enter new path or just press return"
read temp1
if [ -n "${temp1}" ]; then
extfilepath=${temp1}
mount /media/${extfilepath}
fi
unset temp1

}
################################################## ######################################
chroot2()
{

#Return back from CHROOT environment

# Should help if home directories nor saved in re-mastered versions
# rsync -a ${targetpath}/knx/source/KNOPPIX/home/knoppix/ ${targetpath}/knx/source/KNOPPIX/etc/skel/
# chown root:root -R ${targetpath}/knx/source/KNOPPIX/etc/skel/
# rm -rf ${targetpath}/knx/source/KNOPPIX/home/knoppix

clear
echo Now install1.sh active again
echo
echo Prompt should be back to 'root!tty1:/#'
echo Only run after install3.sh and exit to CHROOT
echo

# Put startx back to orig again by re-instating text init 0 etc.
sed 's@echo "/sbin/init 0"@/sbin/init 0@' -i ${targetpath}/knx/source/KNOPPIX/etc/init.d/knoppix-startx
rm -f ${targetpath}/knx/source/KNOPPIX/etc/X11/xorg.conf
rm -f ${targetpath}/knx/source/KNOPPIX/install2.sh
rm -f ${targetpath}/knx/source/KNOPPIX/install3.sh
rm -f ${targetpath}/knx/source/KNOPPIX/dpkg.deb
# read -p "pause"

if [ "${1}" = "2" ]; then
#Remove some files
\rm ${targetpath}/knx/master/KNOPPIX/index*.html 2>/dev/null
\rm ${targetpath}/knx/master/KNOPPIX/KNOPPIX-FAQ-*.txt 2>/dev/null
\rm ${targetpath}/knx/master/boot/isolinux/german.kbd 2>/dev/null

# Update kde splash screen
\cp /media/${extfilepath}/EafBuildImages/splash_top.png ${targetpath}/knx/source/KNOPPIX/usr/share/apps/ksplash/Themes/Knoppix
\cp /media/${extfilepath}/EafBuildImages/splash_top.png ${targetpath}/knx/source/KNOPPIX/usr/share/apps/ksplash/Themes/Default
fi

#Blanket umount
umount -l /media/${extfilepath} >/dev/null 2>&1
umount -l /media/fd0 >/dev/null 2>&1
umount -l /share1 >/dev/null 2>&1

apt-get clean

rm -rf ${targetpath}/knx/source/KNOPPIX/.rr_moved

clear
echo
echo Making the big compressed KNOPPIX ISO 9660 filesystem - used by the cloop driver:

# Get documented error with above, try -m -B
mkisofs -R -U -V "Knoppixfilesystem" -publisher "Knoppix" -input-charset ISO-8859-15 -allow-leading-dots -hide-rr-moved -cache-inodes -no-bak -pad ${targetpath}/knx/source/KNOPPIX | nice -5 /usr/bin/create_compressed_fs - 131072 > ${targetpath}/knx/master/KNOPPIX/KNOPPIX
# NOTE: can add --best for higher compression ie: /usr/bin/create_compressed_fs --best - 65536
cd ${targetpath}/knx/master

echo
echo Updating the md5 hashes of the files included in the ISO, used for integrity checking
echo

find -type f -not -name md5sums -not -name boot.cat -not -name isolinux.bin -exec md5sum '{}' \; > KNOPPIX/md5sums

#v6 required?
#find -type f -not -name sha1sums -not -name boot.cat -not -name isolinux.bin \
#-exec sha1sum '{}' \; > KNOPPIX/sha1sums

echo
echo "Pleae wait making the iso image"

#mkisofs -pad -l -r -J -v -V "KNOPPIX" -no-emul-boot -boot-load-size 4 \
# -boot-info-table -b boot/isolinux/isolinux.bin -c boot/isolinux/boot.cat \
# -hide-rr-moved -o ${targetpath}/knx/knoppix.iso ${targetpath}/knx/master


genisoimage -pad -l -r -J -v -V "KNOPPIX" -no-emul-boot -boot-load-size 4 -boot-info-table -b boot/isolinux/isolinux.bin -c boot/isolinux/boot.cat -hide-rr-moved -o ${targetpath}/knx/knoppix.iso ${targetpath}/knx/master

echo
echo Size of finished iso is:
ls -lh ${targetpath}/knx/knoppix.iso
echo
echo Script finished,the ISO is stored in ${targetpath}/knx/knoppix.iso
read -p "Press any key to end"
}

################################################## ################################################## #####
#Main body of script
################################################## ################################################## #####
targetpath=/media/sda4
target=sda4
extfilepath=sda3
TMP=${targetpath}/knx/tmp

swapon -s | grep "/dev" >/dev/null 2>&1
if [ "${?}" -gt "0" ]; then
mkswap /dev/sda1
swapon /dev/sda1
fi

for i in ${target} ${extfilepath}; do
mount | grep "/dev/${i}" 1>/dev/null 2>&1
if [ "${?}" -eq 0 ]; then
echo "/dev/${i} is already mounted"
else
if [ ! -d /media/${i} ];then
sudo mkdir /media/${i} >/dev/null
fi
echo "Mounting /dev/${i} /media/${i}"
mount /dev/${i} /media/${i}
fi
done

mainmenu

#!/bin/bash
#Functions
build2()
{
apt-get remove -y --purge openoffice.* #335M of disk space will be freed
apt-get autoremove -y
apt-get remove -y lxde*
apt-get remove -y lxappearance
apt-get remove -y lxpanel
apt-get remove -y lxsession-edit
apt-get remove -y lxshortcut
apt-get remove -y pcmanfm
apt-get remove -y compiz*
apt-get remove -y adriane*
apt-get remove -y gimp*
apt-get remove -y gpicview
apt-get remove -y synaptic
apt-get remove -y espeak*
apt-get remove -y libflite1*
apt-get remove -y leafpad*
apt-get remove -y vim-runtime*
apt-get remove -y ocropus*
apt-get remove -y icedove-l10n-de
apt-get remove -y iceweasel-l10n-de
apt-get remove -y virtualbox*
apt-get remove -y geoip-database
apt-get remove -y irssi
apt-get remove -y ncftp
apt-get remove -y rtorrent
apt-get remove -y gconf-editor
apt-get remove -y hplip*
apt-get remove -y mc
apt-get remove -y man-db
apt-get autoremove -y
clean1
dpkg -i --force-all /dpkg.deb
wget -O - http://backports.org/debian/archive.key | apt-key add -
apt-get update
aptitude -t lenny-backports install kde-core kdm
aptitude -t lenny-backports install kpackage
# apt-get remove -y `dpkg-query -l | grep i18n | grep kde | cut -d' ' -f3`
apt-get remove -y frozen-bubble*
apt-get remove -y gnome-utils*
apt-get remove -y smail
apt-get remove -y openbox-themes
apt-get autoremove -y
}
##
build3()
{
apt-get remove -y emacs21 emacs21-bin-common emacs21-common emacsen-common gettext-el zile
apt-get remove -y `dpkg-query -l | grep i18n | grep kde | cut -d' ' -f3`
apt-get remove -y --purge openoffice.* #298M of disk space will be freed
apt-get autoremove -y
clean1

}
####
clean1()
{
deborphan | xargs apt-get -y remove

# May need to run next line three times due to stab source package list errors
# deborphan | xargs apt-get -y remove
# deborphan --find-config | xargs dpkg --purge remove
# deborphan | xargs apt-get -y remove
# deborphan --find-config | xargs dpkg --purge remove
# deborphan | xargs apt-get -y remove
# deborphan --find-config | xargs dpkg --purge remove

COLUMNS=200 dpkg -l | grep ^rc | awk '{print $2} ' | xargs dpkg -P
apt-get autoremove -y
apt-get autoclean
apt-get clean
}

#Main#####
echo "Var1=${1} var2=${2} var3=${3} var4=${4} "
# ${1} ${extfilepath} ${targetpath} ${user}

echo "nameserver xxx.xxx.xxx.xx" >/etc/resolv.conf
route add default gw 192.168.1.254 eth0
route del default gw 192.168.1.1 eth0

lang=en
echo
echo prompt should be sh-3.1
echo
#read -p "in chroot passed var ${*} "

# Already mounted
mount -t proc /proc proc >/dev/null 2>&1
/etc/init.d/dbus start
/etc/init.d/acpid start
read -p "wip"
echo "Un-installing some packages , please wait..."

case ${1} in
2) build2;;
3) ;;
4) ;;
5) ;;
*) echo; read -p "Passed varibale ${1} Invailid Option"; exit;;
esac

# Installed packages
# http://wiki.linuxhelp.net/index.php/...t_Guide#Remove
# To provide list of all installed packages:
# dpkg-query -W --showformat='${Installed-Size} ${Package} ${Status}\n' | grep -v deinstall | sort -n | awk '{print $1" "$2}'
# apt-get remove openoffice-de-en manpages-de trans-de-en

# Starting X-based programs
export DISPLAY=localhost:0.0
export LANGUAGE=en

# \cp /usr/share/apps/ksplash/Themes/Default/locolor/* /usr/share/apps/ksplash/Themes/Default/
chown knoppix:knoppix -R /home/knoppix

#read -p "Pause"

echo
echo --------------------------------------------
#rm -rfv /etc/skel #2.6.28 work - Removed
#mv /home/knoppix /etc/skel #2.6.28 work - Removed


#chown -R root:root /etc/skel #2.6.28 work - Removed
#chown -R root:root /ramdisk || error "Unable to chown root:root -ramdisk"

echo
echo About to change user to knoppix: su knoppix
echo Prompt will change to 'knoppix1tty1:#'
echo
echo KDE will start via next script - install3.sh
echo
# chmod -Rv ugo+rw /tmp
chmod 777 /tmp
echo
#umount /media/${2}
# rmdir /media/${2}

X -configure > /dev/null 2>&1
\mv xorg.conf.new /etc/X11/xorg.conf

if [ "${1}" = "2" ] ; then
dpkg-reconfigure console-data
dpkg-reconfigure xserver-xorg
else
#su - knoppix -c "/install3.sh ${2}"
su - ${4} -c "/install3.sh ${2} ${4}"
fi

## KEYBOARD & MOUSE NOT working in KDE
# echo 'hald_enable="YES"' >> /etc/rc.conf
# echo 'dbus_enable="YES"' >> /etc/rc.conf
# /usr/local/etc/rc.d/hald onestart
# /usr/local/etc/rc.d/dbus onestart





# sudo umount -l /media/fd0 >/dev/null 2>&1
# sudo umount -l /mnt/fd0 >/dev/null 2>&1
# sudo umount -l /share1 >/dev/null 2>&1
# sudo umount -l /nfs1 >/dev/null 2>&1
# sudo umount -l /media/sda2 >/dev/null 2>&1
# sudo umount -l /media/sda3 >/dev/null 2>&1
# sudo umount -l /media/sda4 >/dev/null 2>&1
# sudo umount -l /media/${1} >/dev/null 2>&1

# if [ -d /media/sda2 ]; then sudo rm -rf /media/sda2; fi
# if [ -d /media/sda3 ]; then sudo rm -rf /media/sda3; fi
# if [ -d /media/sda4 ]; then sudo rm -rf /media/sda4; fi

# if [ -d /media/${1} ]; then sudo rm -rf /media/${1}; fi
# if [ -d /media/share1 ]; then sudo rm -rf /media/share1; fi
# if [ -d /media/nfs1 ]; then sudo rm -rf /media/nfs1; fi
##new end###

####
# start of script part b
####
echo
echo install2 active again
echo Make sure you have su root, make sure prompt is sh-3:

sudo umount -l /share1 >/dev/null 2>&1

sudo umount -l /nfs1 >/dev/null 2>&1
# rm /home/knoppix/.bash_history
rm -rf /tmp/*
rm -rf /.rr_moved

# Installing packages many logs and docs are created, If we need the space,
#rm -f /var/lib/apt/lists/*Packages
#rm -f /var/lib/apt/lists/*Release
#rm -f /var/lib/apt/lists/*Release.gpg
cp /var/lib/apt/lists/lock /
rm -f /var/lib/apt/lists/* 2>/dev/null
mv /lock /var/lib/apt/lists/

rm -f /var/lib/dpkg/*old
rm -f /var/cache/debconf/*old
rm -f /var/cache/apt/*bin
rm -f /var/cache/apt/archives/*.deb
# Optional
rm -rf /usr/share/doc/*

#clean1 #NEEDS ATTENTION, IF DO AUTOREMOVE AFTER INSTALLING NEW PACKAGES THEN THEY WILL BE REMOVED!!!
apt-get autoclean

apt-get clean

#read -p "Run only after install3.sh and changes have been made to the KDE"


# rm /etc/X11/xorg.conf
chmod 555 /tmp


umount /proc
umount /sys >/dev/null 2>&1
umount /dev >/dev/null 2>&1
# umount /mediasda4/knx/source/KNOPPIX/dev

exit

#!/bin/bash
echo "Passed variable = DataDrive:${1} User:${2}"
if [ ! -d /media/${1} ]; then
sudo mkdir /media/${1}
fi
sudo mount /dev/${1} /media/${1}


#sudo dpkg-reconfigure xserver-xorg #Must run every time!!!
lang=en
# startx /usr/bin/startkde -- :1
sudo /etc/init.d/knoppix-startx start
#startx

sudo chmod -R 777 /home/${2}/.config/
sudo chmod -R 777 /home/${2}/.local/

#sudo chmod -R 777 /home/knoppix/.*/
# find how to make all the contained files 644

#Blanket umount

sudo umount -l /media/fd0 >/dev/null 2>&1
sudo umount -l /mnt/fd0 >/dev/null 2>&1
sudo umount -l /share1 >/dev/null 2>&1
sudo umount -l /nfs1 >/dev/null 2>&1
sudo umount -l /media/sda2 >/dev/null 2>&1
sudo umount -l /media/sda3 >/dev/null 2>&1
sudo umount -l /media/sda4 >/dev/null 2>&1
sudo umount -l /media/${1} >/dev/null 2>&1

if [ -d /media/sda2 ]; then sudo rm -rf /media/sda2; fi
if [ -d /media/sda3 ]; then sudo rm -rf /media/sda3; fi
if [ -d /media/sda4 ]; then sudo rm -rf /media/sda4; fi

if [ -d /media/${1} ]; then sudo rm -rf /media/${1}; fi
if [ -d /media/share1 ]; then sudo rm -rf /media/share1; fi
if [ -d /media/nfs1 ]; then sudo rm -rf /media/nfs1; fi
exit

Test if this works.
I have uploaded the scripts renamed from .sh to .txt as attachments.