Is there a way to create a swapfile mannually?
Quote:
Originally Posted by Dave_Bechtel
Printable View
Is there a way to create a swapfile mannually?
Quote:
Originally Posted by Dave_Bechtel
I assume you don't have a working Linux install anywhere so get Toms root/boot disk http://www.toms.net/rb/
Boot with it, run
fdisk /dev/hda
It's pretty easy to figure out from there.
Ok, thanx, I'll try it
I have tried several other older computers recently and I am having mixed results getting knoppix to run from cd, on a Gateway2000 PII-266 w/ 80MB of RAM, it get to the point where it says OK booting kernel and hangs there indefinately. Strange thing is, that same computer will run a knoppix hd install that was done on another computer just fine. I should go back and try the failsafe and expert kernels and see what happens.
I tried booting knoppix on a P-150 w/ 32 MB (a 1995 Gateway2000) and it wouldn't run without a hard disk, but once I put in a linux hd with a 128MB swap it booted into kde (very slowly of course).
rock
I have tried making a linux swap file for Knoppix but I only have 1 other machine to work with right now. IBM GL300-350MHz-64Mram and the only distro it's ever liked is MDK9.0 I've another IBM 166 w/80M ram to try out but it's my router for now. I need to get a 486. Haven't had a chance to try out 3.2 though - YET!Quote:
Originally Posted by RockMumbles
Off-Subject, but rickenbacherus, what router software have you been using?
The P-150 w/ 32MB was my home router I was runnng e-smith 4.01 a gateway/server package I've been running for several years.Quote:
I've another IBM 166 w/80M ram to try out but it's my router for now. I need to get a 486.
rock
' /usr/sbin/mkdosswapfile '
The manual way:
' df '
' mount /mnt/hda1 -oremount,rw '
' dd if=/dev/zero of=/mnt/hda1/knoppix.swp bs=2M count=64 ' == 128Meg swapfile
' mkswap /mnt/hda1/knoppix.swp '
' swapon /mnt/hda1/knoppix.swp '
' swapon -s '
--Knoppix should autodetect and activate this swapfile from now on.
Quote:
Originally Posted by KeelMan
--To everyone reading this thread:
NOBODY should have to run with 32Meg RAM anymore. Unless you're running with ancient 72-pin SIMMS or a non-upgradable laptop, you can go out to Officemax and get 128Meg SDRAM for like $30-40. They even offer a money-back rebate. You can probably find it even cheaper online, but then you have to wait, and pay for shipping.
--My ancient P100 came with 32Meg. My roomie upgraded the mommybopard and chip to P233MMX, and I upgraded it to 164Meg of RAM. It's my server now!
--To quote Nike: Just Do It. Go out and buy the RAM. You won't regret it.
Quote:
Originally Posted by RockMumbles
Using Coyote. It's quite easy to set up. Unfortunately Dalantec decided not to host the Coyote FAQ anymore- wish I would have saved it somewhere. It was the best how-to for Coyote. The router has no keyboard, mouse or monitor-I just telnet in and check the logs from time to time. It's been up for almost 6 weeks now. That'll be a record for me.Quote:
Off-Subject, but rickenbacherus, what router software have you been using?
cmon' Dave we don't all have so much dinero lying aroung you know. :DQuote:
NOBODY should have to run with 32Meg RAM anymore
I totally agree with Dave, I wouldn't want to have to run Knoppix on my P-150 w/32MB of RAM (72-pin) and swap partition, I said it was slow running KDE, I really didn't do this thread justice when I said it was slow, it took more than 15 minutes for konqueror to come up with the cd's html index page, I never did see mozilla actually run, I gave up. The other problem with most systems of this age is not only a lack of memory but also video cards that only partially function with X-4.x.Quote:
--To everyone reading this thread:
NOBODY should have to run with 32Meg RAM anymore. Unless you're running with ancient 72-pin SIMMS or a non-upgradable laptop, you can go out to Officemax and get 128Meg SDRAM for like $30-40. They even offer a money-back rebate. You can probably find it even cheaper online, but then you have to wait, and pay for shipping.
Similar to Dave's story about his server, I have taken several old cases, made sure the power supplies functioned OK, put in a new 80mm fan if necessary and then put in used AMD K2 processors on AT motherboards that I find used. Using other recycled parts that I find or have laying around, I have built 3 or 4 computers for a cash outlay of between 30 to 75 dollars (US) each. The $75 one is my office computer, it was built from a free case, a $20 combination of a motherboard, a K3-450 processor, and a Voodoo3 pci video card. I paid another $30 for a used 30GB hd and had to buy a $20 128MB stick of ram, and a $3 used cd-rom, it runs great, it has never crashed or locked up, I am running libranet 2.0 on it, no problems even through power outages at school.
I do realize that in other parts of the world people are not obsessive consumers like we are in the US so finding good functioning used parts inexpensively may be a different story.
rock