KDE, apt-get and Knoppix

Printable View

Show 40 post(s) from this thread on one page

05-31-2003, 08:03 PM
Icekiss

KDE, apt-get and Knoppix

I have installed knoppix yesterday (runs now just fine :D ).
I started to play around with it (especially with apt-get), and found, that updating KDE isn't all that simple.
After trashing my system with "apt-get dist-upgrade" and playing around by installing and removing of testing and unstable packages for a few more hours I reinstalled it today completelly.

Ok, now I want to install kdict (on my new, cleanly reinstalled knoppix 3.2), and therefore run:
--------------------------------------------------------------------------------
root@terminus:/home/knoppix# apt-get -s install kdict
Reading Package Lists... Done
Building Dependency Tree... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.

Since you only requested a single operation it is extremely likely that
the package is simply not installable and a bug report against
that package should be filed.
The following information may help to resolve the situation:

Sorry, but the following packages have unmet dependencies:
kdict: Depends: kdelibs3 (>= 4:2.2.2-1) but it is not going to be installed
E: Sorry, broken packages
----------------------------------------------------------------------------------------------

the uncommented lines of my sources.list:

# Stable
deb http://ftp2.de.debian.org/pub/debian stable main contrib non-free
deb http://ftp2.de.debian.org/pub/debian-non-US stable/non-US main contrib non-free
# Testing
deb http://ftp2.de.debian.org/pub/debian testing main contrib non-free
deb http://ftp2.de.debian.org/pub/debian-non-US testing/non-US main contrib non-free
# Unstable
deb http://ftp2.de.debian.org/debian unstable main contrib non-free
deb http://ftp2.de.debian.org/debian-non-US unstable/non-US main contrib non-free
------------------------------------------------------------------------------------------------------

apt.conf is unchanged, which means my default release is testing
and yes, I did run apt-get update beforehand.

I tried to install noatun as well, and got the same unmet dependency.

Can anybody help?
05-31-2003, 08:11 PM
aay

If apt-get install package doens't work try "apt-get install package/testing" or "apt-get install package/unstable". Alternately you may try "apt-get -t testing install package" or "apt-get -t unstable install package". The last one may be the ticket but try the others first.
05-31-2003, 08:26 PM
Icekiss

The last one is the only one where apt-get isn't complaining about broken packages.
That is what apt-get want's to do:

The following extra packages will be installed:
alsa-headers ark audacity cpp-3.2 cupsys e2fsprogs fontconfig
foomatic-db-gimp-print g++-3.2 gcc-3.2 gcc-3.2-base gcc-3.3-base gcj-3.2 gs
gs-common gs-esp ijsgimpprint k3b kaddressbook kalarm kamera kandy
kappfinder karbon karm kasteroids kate kate-plugins kbattleship kbounce
kcalc kcharselect kchart kcoloredit kcontrol kdeaddons-kfile-plugins
kdebase-bin kdebase-kio-plugins kdegraphics-kfile-plugins kdelibs-bin
kdelibs-data kdelibs4 kdelibs4-dev kdemultimedia-kfile-plugins
kdenetwork-kfile-plugins kdepasswd kdepim kdepim-kfile-plugins kdepim-libs
kdeprint kdesktop kdessh kdevelop kdevelop-data kdf kdm kdvi kedit kfax
kfind kfloppy kformula kgeo kget kghostview kgpgcertmanager khelpcenter
khexedit kicker kicker-applets kiconedit kivio kjots klaptopdaemon klipper
kmail kmailcvt kmenuedit kmix kmrml knotes koffice-libs kompare konq-plugins
konqueror konqueror-nsplugins konsole kontour kooka korganizer koshell
kpackage kpager kpaint kpersonalizer kpf kpilot kppp kpresenter krdc krfb
ksim ksmserver ksnapshot ksokoban ksplash kspread kstars ksync ksysguard
ksysguardd kteatime ktimer ktip kugar kuickshow kuser kview kviewshell kwin
kword kxmlrpc libarts1 libarts1-dev libartsc0 libartsc0-dev libasound2
libasound2-dev libaudio-dev libblkid1 libcupsimage2 libcupsys2
libcupsys2-dev libdb4.1 libfam-dev libfam0c102 libfontconfig1
libfontconfig1-dev libgcc1 libgcj3 libgcj3-dev libgcrypt-dev libgcrypt1
libgdbmg1-dev libgimpprint1 libgnutls5 libgnutls5-dev libgphoto2-2
libgphoto2-port0 libid3-3.8.3 libijs-0.34 libkdegames1 libkdenetwork2
libkonq4 libkregexpeditor libkscan1 libldap2 libmal0 libmimelib1 libopenal0
libopencdk-dev libqt3-headers libqt3-mt-dev libqt3c102-mt libsane libsasl2
libsdl-mixer1.2 libsmbclient libstdc++5 libstdc++5-dev libtasn1-dev
libusb-0.1-4 libusb-dev libvorbis-dev libvorbis0a libvorbisenc2
libvorbisfile3 libwxgtk2.4 libxft2 libxft2-dev libxslt1 lisa psi python2.2
qt3-dev-tools scribus sox vorbis-tools xlibmesa-gl-dev xlibmesa-glu-dev
xlibs xlibs-dev xlibs-pic
The following packages will be REMOVED:
cupsys-driver-gimpprint kalarmd klprfax libfam0 libkcal2 libkgantt0
libqt3-dev libqt3-helper libqt3-mt libvorbis0 nas-dev qt3-tools
The following NEW packages will be installed:
g++-3.2 gcc-3.3-base gs ijsgimpprint kdepim-kfile-plugins kdict libaudio-dev
libblkid1 libcupsimage2 libdb4.1 libfam0c102 libfontconfig1-dev
libgcrypt-dev libgdbmg1-dev libgnutls5-dev libid3-3.8.3 libijs-0.34 libmal0
libopencdk-dev libqt3-headers libqt3c102-mt libsasl2 libsmbclient
libstdc++5-dev libtasn1-dev libvorbis0a libwxgtk2.4 libxft2-dev
qt3-dev-tools xlibmesa-gl-dev xlibmesa-glu-dev xlibs-pic
The following held packages will be changed:
libqt3-dev libqt3-mt libqt3-mt-dev
162 packages upgraded, 32 newly installed, 12 to remove and 651 not upgraded.
----------------------------------------------------------------------------------------------------
Looks like this would actually work...
But why the heck do I have to upgrade half my system?
I thought KDE 3 stays binary-compatible?
But if thats the way to go, I will do it (and pray that i don't trash my system again...)
Thanks for your hint!
(Before I do upgrade, I will wait for an reaction)
05-31-2003, 09:17 PM
Stephen

Code:

[05:11 PM Sat May 31: root @ /home/stephen] ># apt-cache policy kdict kdict: Installed: (none) Candidate: 4:2.2.2-14.1 Version Table: 4:3.1.2-1 0 500 http://ftp.de.debian.org unstable/main Packages 4:2.2.2-14.6 0 500 http://security.debian.org stable/updates/main Packages 4:2.2.2-14.1 0 990 http://ftp.de.debian.org testing/main Packages 4:2.2.2-14 0 500 http://ftp.de.debian.org stable/main Packages [05:12 PM Sat May 31: root @ /home/stephen] ># apt-get -s install kdict/unstable Reading Package Lists... Done Building Dependency Tree... Done Selected version 4:3.1.2-1 (Debian:unstable) for kdict The following NEW packages will be installed: kdict 0 packages upgraded, 1 newly installed, 0 to remove and 33 not upgraded. Inst kdict (4:3.1.2-1 Debian:unstable) Conf kdict (4:3.1.2-1 Debian:unstable)

I think you would be better off just installing the single package. But if you are on a high speed connection and can do without the 12 packages that will be removed it looks like it's going to work properly.
05-31-2003, 09:29 PM
Icekiss

the connection isn't the problem (DSL flat), but if I could just install the single package I would do so (less likely to cause problems). I just don't know how...
05-31-2003, 10:05 PM
kaplanfx

Maybe this will help

I'm not sure if this will do the trick but apt-get has a force command. You can try apt-get install -f without any package but that might break some dependancies, you could also try apt-get install -f kdict and that just might do the trick. I assume you can -s to simulate those too.
05-31-2003, 10:33 PM
Icekiss

the -f option is for fixing broken packages, not to force anything.
I could try to force dpkg to install the package, but for that I would need the .deb package on my system first. And apt-get won't fetch it, because of the broken packages...

Anyway, no one tried to stop me from installing kdict upgrading kde alongside, so I while give that a try.
05-31-2003, 10:36 PM
Stephen

Quote:

Originally Posted by Icekiss

the connection isn't the problem (DSL flat), but if I could just install the single package I would do so (less likely to cause problems). I just don't know how...

So which packages are conflicting when you run apt-get -s install kdict/unstable can you do without them if so remove them. Just simulate the removal of the packages and see if anything important is going to be removed. Could you post the output of the above apt-get so I can see.
05-31-2003, 10:50 PM
Icekiss

The output of your command is, that there are broken packages.

The command "apt-get -s -t unstable install kdict" does work however.
The output is already listed in this Thread (my second post in this thread).

The packages that are to be removed are:
cupsys-driver-gimpprint kalarmd klprfax libfam0 libkcal2 libkgantt0
libqt3-dev libqt3-helper libqt3-mt libvorbis0 nas-dev qt3-tools

That looks ok to me.
I just hope that nothing of the cool knoppix preconfiguration gets lost on the way.
05-31-2003, 11:41 PM
Icekiss

Well, I did try to do the actualizing of KDE, it downloaded ok, but presented me an error within the replacement process:
-------------------------------------------------------------------------------------
Fehler traten auf beim Bearbeiten von:
/var/cache/apt/archives/kdepim-libs_4%3a3.1.2-1_i386.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
-------------------------------------------------------------------------------------
translation of the first line: "errors occured during the processing of:"
After that I was given back the command line...
I tried the proposed "apt-get -f install", but that wanted to remove the whole KDE!

I'm going to reboot my computer now, to see if everything still works ok...

EDIT: back again, seems like no harm is done

Show 40 post(s) from this thread on one page