Running KNOPPIX From CD, Stops At Penguin Screen!

I've tried running KNOPPIX_V3.7-2004-12-08-EN.iso from CD, more than once but after about 1/2 an hour, during which my hardware is detected, it gets as far as the splash-screen with the Penguin sitting in the middle of a CD, then nothing.

System specs:
OS: Win. XP Pro.
File System: NTFS
MB: ASUS A7N8X-E Deluxe
BIOS: Award
CPU: AMD Athlon XP 1.6
Ram: 256 Meg Crucial Memory
HD: C:(80GB Western Digital Caviar SE, no partitions)
CD Drive: D:(Liteon 40x12x48x Writer)
DVD Drive: J:(LG GSA-4160B Writer, in external USB2 enclosure)

Ajak. :(

You will need to use qtparted to carve out a space for knoppix.

In other words: partition your drive. I'm no expert in windows
but linux can't use NTFS. You will need to decide how much space you want to
give to the knoppix install and then what type of install you want to do.

Then there's the subject of dual booting search for grub or lilo.

Sorry my mistake, I am trying to run KNOPPIX from the CD.

Ajak,

You may need to experiment with the cheat codes to get
knoppix to boot. See: http://www.knoppix.net/wiki/Cheat_Codes

Quote:

---

Originally Posted by Ajak

Sorry my mistake, I am trying to run KNOPPIX from the CD.

---

No, it wasn't your mistake, you stated that clearly in the first post, and any question asked about Knoppix that is not asked in the hd forum should be assumed to be asked about the Live CD.

I agree, cheat codes may be helpful, particularly nodma. You may also find that you need to burn the CD at a slow speed like 4x if you burned it faster (yea, I know, in theory your drive should burn disks at 48x or faster just fine, but a lot of people fianlly acknowledge that all they needed to do to get a CD to boot was burn it at 4x). And I certainly hope that you confirmed the md5 checksum of the iso file before burning it, to be sure that the download was not corrupt.

Yes I did burn at 4x & confirmed the md5 checksum, I don't think the download was corrupt, because I first bought the KNOPPIX 3.7 CD from http://www.cheeplinux.com/ & exactly the same thing happened.

I just bought an old PIII 500Mhz PC w 128MEG RAM & 8GB HDD. I am planning to install Debian Linux on it but first I will format the HDD with FAT16, run the KNOPPIX CD & see what happens.

Ajak. :?

Quote:

---

Originally Posted by Ajak

Yes I did burn at 4x & confirmed the md5 checksum, I don't think the download was corrupt, because....

---

If you checked the md5 sum then the download was absolutely not corrupt, no further logic needed.

Cheat codes should still help you boot, although finding the right codes for your particular situation can be perplexing.

There's a cheat code (testcd, I think) will verify the image on the cd. If that fails, the problem would be either the CD or the CD-ROM drive.

Quote:

---

Originally Posted by Harry Kuhman

Quote:

---

Originally Posted by Ajak

Sorry my mistake, I am trying to run KNOPPIX from the CD.

---

No, it wasn't your mistake, you stated that clearly in the first post, and any question asked about Knoppix that is not asked in the hd forum should be assumed to be asked about the Live CD.

I agree, cheat codes may be helpful, particularly nodma. You may also find that you need to burn the CD at a slow speed like 4x if you burned it faster (yea, I know, in theory your drive should burn disks at 48x or faster just fine, but a lot of people fianlly acknowledge that all they needed to do to get a CD to boot was burn it at 4x). And I certainly hope that you confirmed the md5 checksum of the iso file before burning it, to be sure that the download was not corrupt.

---

I don't remember seeing the live cd bit the 1st time I read the post & the post was edited!

i normaly burn cds at 24x ive never had no problem other then when i tryed to burn cd over a remote connection...

Quote:

---

Originally Posted by pureone

i normaly burn cds at 24x ive never had no problem other then when i tryed to burn cd over a remote connection...

---

I'm not saying all burns at 24x or faster are bad. In theory a drive that is made to burn at these speeds shouild make a disc that is bootable. But in reality I and many others have seen high speed burning problems and burns that are made at 4x work. So I suggest to anyone having problems to do their first burns until they get a working CD at 4x (or even better use a CDRW which wil force them to 4x or even 2x unless they use the high speed CDRW media). One someone know that they can burn properly then If they want to risk high speed burns that is a choice they make.