New version due to file corruption during upload of 2003-04-09.
Printable View
New version due to file corruption during upload of 2003-04-09.
Thanx Stephen,
That huge sucking sound is my broadband Leech in progress ':D'
All the best, RK
Ac 97 sound module is still not loaded
Savage graphics have been broken since V3.2-2003-03-28
for the powers to be
Compaq presario 6000
S3 prosavage ddr onboard graphics
Thanks for a great product!
It would help a whole lot if you provided downloads via bittorrent, a peer-to-peer technology that scales MUCH better than mirrors and is much faster per download.
http://bitconjurer.org/BitTorrent/index.html
E.g. KNOPPIX_V3.2-2003-03-28-EN is available at
http://207.44.142.96/
Check out the graphs and other isos there.
Cheers,
Did you try the now working alsa-autodetection ?Quote:
Originally Posted by thewalkingman
"knoppix alsa" at start.
and try knoppix xmodule=fbdev, like it was before for your card.
so your whole line ist:
knoppix xmodule=fbdev alsa
cu
Fabian
PS: I spent a lot of time to get alsa working, so please try it!
this is my 3rd attempt on download the d* iso! My bandwidth is veeeery limited, but i will not order de CD! :wink: Please keep it for 3 or 4 days, pleeease, my prozilla is suffering... :cry:
I tried knoppix alsa but the video is broken :cry:
and no the sound module cant be found
hmm, too bad that means your soundcard seems not supported by linux :-(Quote:
Originally Posted by thewalkingman
cu
Fabian
PS: or did it work once ?
It is clear that checking the md5sums is very important. But sometimes people neglect to get the files, and can't do so later because the mirrors are overloaded.
It can often also be confusing to figure out which file on the mirrors is the most recent one.
I think it would help to put the md5sums on the knoppix download page, next to the full file names of the most recent versions.
Cheers,
PS: or did it work once ?
No fairly new machine
i suppose i could install redhat 9 and compile drivers
Re Ac'97
I also have this onboard soundcard and was able to have it detected as usual no problem. Check your bios.
Re Video 'Broken'
Dunno if same prob, but this was first time knoppix didn't detect my refresh rate properly so screen was black/white choppy. Press f2 in boot you will see knoppix xrefresh=60 or somesuch. Check it out.
where in bios?
I believe it is listed in peripherals. Make sure you have the soundcard enabled. There are 3 or 4 lines that need to be enabled. This is assuming your bios is the same or similar which is likely. Mine is on a gigabyte board.
Done that already...
I tried the gentoo ut2003 demo cd and it loaded the alsa driver so there is hope for me yet[/url]