Printable View
I have an external hard drive that plugs into my USB port. Knoppix assigns the device /dev/uba1 to it. When I try to scan the drive using the command "gpart /dev/uba1", I receive the message "*** Fatal error: ioctl(HDIO_GETGEO) failed: Inappropriate ioctl for device."
I accidentally deleted the primary NTFS partition on this drive and I'm trying to re-create it. Can gpart help me with this? What do I need to do?
I havn't used gpart much and never on a usb device, but shouldn't you be scanning uba, the hard drive, and not uba1, the partition that does not exist?Quote:
Originally Posted by ktas
Well, I'm new to this, but perhaps you're right. If that's all it is, I'll be embarassed, but appreciative! I'll try that. :-)
Yup. You want the device where the partition table is stored, i.e. /dev/uba. According to the man page, yes, gpart should be able to recover the partition table even if the filesystem is NTFS. I'm curious to know how you deleted the partition and how well gpart worked to recover it. So, please let us know how it goes.Quote:
Originally Posted by ktas
As safety net, you may want to image the entire device before you let gpart work on it. You can image the device with dd. How big is the USB device? Do you have enough space on another device to store the image?
Regards,
- Robert
http://www.cwelug.org
Well, I did try using "/dev/uba" and received the same error msg. The error seems to be saying that the routine HDIO_GETGEO that the program is using is not valid for USB. The device is a 200 GB Maxtor external drive. But, at this point, I can't even perform a sucessful scan of the drive.
What is a "successful scan"? Are you able to read the first 512 bytes of the drive with dd? For example:Quote:
Originally Posted by ktas
BTW, if you know the NTFS partition took up the entire drive you can simply "repartition" with fdisk. Again, you may want to make an image of the drive first.Code:dd if=/dev/uba of=/tmp/mbr.img bs=512 count=1
Regards,
- Robert
http://www.cwelug.org
No, I was referring to the "gpart" utility which refuses even to scan the drive. I know there was only a single NTFS partition. Repartitioning with fdisk won't lose data?Quote:
Originally Posted by rwcitek
Uh, you've got a backup image, right? In that case, no, you won't lose any data. Partitioning, especially when there's only one partition involved, only modifies the first 512 bytes of data. Destroying the partition table is kind of like ripping out the table of contents from a book. The chapters are still there, you just don't know how many there are or where they are or how big they are. But if you know there was only one partition and it took the entire drive and it was NTFS, then you can recreate the partition table.Quote:
Originally Posted by ktas
However, if you do not create a backup image first, yes, whatever you do will immediately destroy all hopes of getting any meaningful data off the drive. That rule is called "Murphy's Law" and it holds true whenever there's really important data involved. ;)
Regards,
- Robert
http://www.cwelug.org
Okay. Thanks so much for the help. :)Quote:
Originally Posted by rwcitek
You can also see if testdisk sees the partition, but like rwcitek said, the easiest way is to just fdisk a new partition AFTER taking a backup image of the disk.
Got it! Thanks. :wink:Quote:
Originally Posted by Markus
"Got it!" as in "I understand" or as in "I was able to get to my data on the drive"?Quote:
Originally Posted by ktas
Inquiring minds want to know.
Regards,
- Robert
http://www.cwelug.org
As in "I understand". Sorry about that. :oops:Quote:
Originally Posted by rwcitek
It's probably going to be a while before I can actually sit down and try some of this out.