I have used the following cheatcodes to no avail!
xmodule=vesa
xmodule=fbdev
xvrefresh=60
screen=800x600
noddc
:cry:
my video card is a GeForce2 MX/MX400
Printable View
I have used the following cheatcodes to no avail!
xmodule=vesa
xmodule=fbdev
xvrefresh=60
screen=800x600
noddc
:cry:
my video card is a GeForce2 MX/MX400
What exactly happens? Dose it boot at all- does it tell you exactly what doesn't work? BTW- don't use the xvrefresh=60 unless that is the actual vertical refresh rate for your monitor.
How About giving this a try
knoppix xserver=XF86_SVGA xvrefresh=60 (check this first with your monitor!) vga=normal
It worked for me this will at least get KDE up and runnig from there the skies the limit.....
Dave 8)
Thanks for the replys.
What I'm getting is the knoppix blue screen, then
loading vmlinuz........
loading miniroot.gz........
then a black screen
when I tried vga=normal I got the above, plus:
Ready.
Uncompressing Linux....OK, booting the kernel
then everything froze (blue screen and above writing stayed on) no response to any keyboard input. Which is a step further than I have been before, but not far enough!!
I also tried xserver=XF86_SVGA xvrefresh=60 vga=normal
with the same results
monitor is a Mag innovision model dx15fe.
any more suggestions?
Try adding xmodule=nv to the line and have you tried the noddc in combination with the other options or just on it's own that may be worth a try.Quote:
Originally Posted by cozzy
have tried the following combinations:
xserver=XF86_SVGA
2 vga=normal
noddc vga=normal
vga=normal xmodule=nv
xserver=XF86_SVGA vga=normal
xserver=XF86_SVGA xvrefresh=60 vga=normal xmodule=nv noddc
xserver=XF86_SVGA xvrefresh=60 vga=normal xmodule=nv
always the same results: if i dont put in vga=normal I get
loading vmlinuz........
loading miniroot.gz........
then a black screen
if I do put in vga=normal, I get:
loading vmlinuz........
loading miniroot.gz........
Ready.
Uncompressing Linux....OK, booting the kernel
then everything freezes (blue screen and above writing stay on) no response to any keyboard input.
:(
This seems like a hardware (detection) problem (in the kernel). Try adding all the "no.." (noacpi, nousb) stuff that you can afford to run without, or don have at all.Quote:
Originally Posted by cozzy
What are the rest of the specs of you machine? Mobo, sound, etc.
tried
noscsi nopcmcia nousb noswap noapm noapic noddc
results as before.
my sytem stats: hope they are of some use, thanks for you assistaince
Andrew
[Display]
Item Value
Name NVIDIA GeForce2 MX/MX 400 (Microsoft Corporation)
PNP Device ID PCI\VEN_10DE&DEV_0110&SUBSYS_00000000&REV_B2\4&26E 5833C&0&0008
Adapter Type GeForce2 MX//MX 400, NVIDIA compatible
Adapter Description NVIDIA GeForce2 MX/MX 400 (Microsoft Corporation)
Adapter RAM 64.00 MB (67,108,864 bytes)
Installed Drivers nv4_disp.dll
Driver Version 6.13.10.2958
INF File nv4_disp.inf (nv4 section)
Color Planes 1
Color Table Entries 4294967296
Resolution 800 x 600 x 60 hertz
Bits/Pixel 32
Memory Address 0xDE000000-0xDEFFFFFF
Memory Address 0xD0000000-0xD7FFFFFF
IRQ Channel IRQ 5
I/O Port 0x000003B0-0x000003BB
I/O Port 0x000003C0-0x000003DF
Memory Address 0xA0000-0xBFFFF
Driver c:\windows\system32\drivers\nv4_mini.sys (6.13.10.2958, 870.81 KB (891,711 bytes), 29/08/2002 6:16 PM)
[Sound Device]
Item Value
Name VIA AC'97 Enhanced Audio Controller (WDM)
Manufacturer VIA Technologies, Inc.
Status OK
PNP Device ID PCI\VEN_1106&DEV_3059&SUBSYS_41611106&REV_30\3&61A AA01&0&8D
I/O Port 0x0000E800-0x0000E8FF
IRQ Channel IRQ 11
Driver c:\windows\system32\drivers\viaudio.sys (5.12.01.3516 built by: VIA, 42.63 KB (43,648 bytes), 11/10/2002 12:36 PM)
Name Unimodem Full-Duplex Audio Device
Manufacturer Microsoft
Status OK
PNP Device ID MODEMWAVE\0\{40C976DC-41A9-4ED5-87E0-D3DDE54AB191}
Driver c:\windows\system32\drivers\modemcsa.sys (5.1.2600.0 (xpclient.010817-1148), 15.75 KB (16,128 bytes), 11/10/2002 12:39 PM)
[Conflicts/Sharing]
Resource Device
I/O Port 0x00000000-0x00000CF7 PCI bus
I/O Port 0x00000000-0x00000CF7 Direct memory access controller
I/O Port 0x000003C0-0x000003DF VIA Tech CPU to AGP Controller
I/O Port 0x000003C0-0x000003DF NVIDIA GeForce2 MX/MX 400 (Microsoft Corporation)
IRQ 5 NVIDIA GeForce2 MX/MX 400 (Microsoft Corporation)
IRQ 5 VIA PCI 10/100Mb Fast Ethernet Adapter
IRQ 11 VIA Rev 5 or later USB Universal Host Controller
IRQ 11 VIA Rev 5 or later USB Universal Host Controller
IRQ 11 VIA Rev 5 or later USB Universal Host Controller
IRQ 11 VIA AC'97 Enhanced Audio Controller (WDM)
IRQ 11 HSP56 MR
Memory Address 0xA0000-0xBFFFF PCI bus
Memory Address 0xA0000-0xBFFFF VIA Tech CPU to AGP Controller
Memory Address 0xA0000-0xBFFFF NVIDIA GeForce2 MX/MX 400 (Microsoft Corporation)
I/O Port 0x000003B0-0x000003BB VIA Tech CPU to AGP Controller
I/O Port 0x000003B0-0x000003BB NVIDIA GeForce2 MX/MX 400 (Microsoft Corporation)
[Memory]
Resource Device Status
0xA0000-0xBFFFF PCI bus OK
0xA0000-0xBFFFF VIA Tech CPU to AGP Controller OK
0xA0000-0xBFFFF NVIDIA GeForce2 MX/MX 400 (Microsoft Corporation) OK
0xC0000-0xDFFFF PCI bus OK
0x10000000-0xFFDFFFFF PCI bus OK
0xFEE01000-0xFFDFFFFF PCI bus OK
0xDDE00000-0xDFEFFFFF VIA Tech CPU to AGP Controller OK
0xCDC00000-0xDDCFFFFF VIA Tech CPU to AGP Controller OK
0xE0000000-0xE3FFFFFF VIA Tech CPU to AGP Controller OK
0xDE000000-0xDEFFFFFF NVIDIA GeForce2 MX/MX 400 (Microsoft Corporation) OK
0xD0000000-0xD7FFFFFF NVIDIA GeForce2 MX/MX 400 (Microsoft Corporation) OK
0xDFFFFF00-0xDFFFFFFF VIA PCI 10/100Mb Fast Ethernet Adapter OK
Hmmm, btw how long do you wait? It could be that the kernel is wrong with it's fbdev (graphical text console) device settings, but that X will start correctly.Quote:
Originally Posted by cozzy
Have you tried knoppix vga=normal?
What kind of motherboard do you use? If you don't know you could install Sisoft Sandra and let it detect it.
I sifted though the CheatCodes again, adn I think you could also try this:
Quote:
If you have an old (VGA) monitor and get only flickering with the defaults, try "knoppix-txt xvrefresh=60" or "fb800x600"
thanks for your help henk, I tried all in your last message, to no avial
I'm gonna try and sound a bit more desperate by listing my problem under the heading
"im gonna have to buy red hat!"
and see if I can get any joy.
Meantime, if you come up with anything, please let me know!
Cozzy
tried failsafe and expert?
tried testcd ?
In rare cases, linux won't work with your processor / mb. If nothing else works, try downloading something like the debian install CD ( 30 mb ) and see if that boots. It may be a bug in the way the kernel is configured.
Is your cpu overclocked? Check in the bios, if you have plug&play OS turn it off. If you have an OS selection, change it to UNIX ( newer MB's ).
tried failsafe and expert.
got a black screen with lots of writing,
but I did notice "SMP motherboard not dected" 2 lines from the bottom
the screen then froze, no keys worked, and I had to reset.
in bios, I changed Plug and Play aware o/s to 'no'
same result
reading the motherboard manual:
my motherboard is a pc ddr266 systemboard m825 series
has a km266chipset that supports 4x AGP slot, 100/133 MHz DDR/SDR
The mainboard has the built-in AC97 Codec, and CNR slot and a built-in 10BaseT/100BaseTX Network interface
Has the 128-bit 2D/3D AGP graphics accelerator with 32mb frame buffer, suppoorting AGP 4X 266MHz mode up to 1GB/s bandwidth.
hope this helps
thanks for all the assistance
Cozzy
Did you boot:Quote:
Originally Posted by cozzy
knoppix nosmp
Have you disabled IRQ sharing in the BIOS?
Do you have another monitor to try out?
Are you sure this is not a problem withyour cd? Could be the cd drive or the cd missreading? Have you tried another monitor, or video card?
Good luck. Jimmy