rockwell external modem need help

Printable View

05-19-2003, 08:08 PM
bako

rockwell external modem need help

I use rockwell external v.90 56k, but still doesn't work. just stop in initializing modem. I was hear, it's not difficult to configure external modem on linux. but, I'm not lucky. somebody can help me?
05-20-2003, 10:13 AM
iconfly

I am using A Rockwell external modem. The only thing I had to do was change the device option in setup. I changed it from /dev/modem to /dev/stty1 or whatever serial port is used by the modem. Hope this helps, Jimmy.
05-20-2003, 10:54 AM
bako

I tried with /dev/ttyS1 but nothing happen. still stuck with initializing modem. anything help?
mmm...did u use knoppix 3.2?
05-20-2003, 03:09 PM
RockMumbles

in linux /dev/ttyS0 is your first serial port, COM1 in DOS, and /dev/ttyS1 is COM2, etc.

What serial port is your modem on?

rock
05-20-2003, 07:21 PM
iconfly

Yes I use 3.2 Do you have or can borrow another external modem?
Does it work under windows? If so you could find the port used.
Good luck!!
05-21-2003, 08:32 PM
bako

I use COM2 so I tried with /dev/ttyS1 but doesn't work. but it's work under windows. or maybe I should try with COM1. or any idea?
05-28-2003, 08:14 PM
bako

im almost give up with "this" modem. its right external modem and work under windows but still stuck with "initializing modem".
i want online with my linux :(
anyone can help me???
05-28-2003, 10:05 PM
iconfly

You could try running minicom. This is a comms program and should allow you to test the modem. Also it might be worth booting up with the modem switched OFF so it does not get autodetected. Then power modem up and try to connect. Hope someone has an answer for you. 8) :o
06-02-2003, 05:59 AM
bako

yes it's good idea to use minicom. thanx, i can heard my modem called my ISP. but I don't know, why it's not connected. i already configure my ISP phone number, my account, password, my serial port. im not familiar with minicom. man page is not helped me. any tutorial to use minicom I can get? :)
06-02-2003, 06:48 AM
Stephen

Quote:

Originally Posted by bako

yes it's good idea to use minicom. thanx, i can heard my modem called my ISP. but I don't know, why it's not connected. i already configure my ISP phone number, my account, password, my serial port. im not familiar with minicom. man page is not helped me. any tutorial to use minicom I can get? :)

This article and the second part on linux journal might help.
04-21-2005, 11:29 PM
sjey

Re: rockwell external modem need help

Quote:

Originally Posted by bako

I use rockwell external v.90 56k, but still doesn't work. just stop in initializing modem. I was hear, it's not difficult to configure external modem on linux. but, I'm not lucky. somebody can help me?

I had the same problem with US robotics sportster voice 33600 Fax modem. I set the jumpers to com 2 and irq 3 (this also disabled pnp, and in windows I had to manually instal it - windows could not find it itself). It worked with Knoppix. Hope this helps.