Iīm trying to install / use my USB - Digital Camera (CASIO QV-R4) Camera under KNOPPIX 3.3.
I tried to do this in KDE Control Center - but it didnīt support my camera.
Has anybody any experience?
thank you,
stefan
Printable View
Iīm trying to install / use my USB - Digital Camera (CASIO QV-R4) Camera under KNOPPIX 3.3.
I tried to do this in KDE Control Center - but it didnīt support my camera.
Has anybody any experience?
thank you,
stefan
I just bought a usb 6-n-1 card reader for mine and when I put in a card (sd/cf/smart,etc..) and boot knoppix live it makes it plug-and-play and treats the media like a normal hard drive.Makes it easy to move files between the camera and debian just by swaping the card.The reader was about 30bucks.
Not what your looking for by a possiable solution.
Yes this is a good solution. I bought a small little reader and am quite happy with it.Quote:
Originally Posted by Tech2k
On the other hand try running gtkam and see if it detects your camera. You may want to consult the gtkam website to see if your camera is supported.
I have had much success simply mounting my Toshiba as /dev/sda1.
YES- I mount my Fuji FinePix 1400Zoom by editing the /etc/fstab file:
# This will add support for a USB camera to be mounted as a removable media
/dev/sda1 /mnt/XXXX auto noauto,user,rw 0
Remember to create the directory XXXX (can be any name) under /mnt (You can also make this any directory, anywhere.
Good Luck,
Civ
Yes some cameras will work like this because they function as a generic usb hard drive (not mine), but this will certainly not work with all cameras. Perhaps not even the majority. Fortunately for you it appears that your model can be treated as a simple usb hard drive. I discovered this by looking at the links below. Check them out and you should be able to get your camera working. The fist link shows which cameras us the usb mass storage device driver. The second one is more suited to your casio.Quote:
Originally Posted by CivilEng
http://www.teaser.fr/~hfiguiere/linux/digicam.html
http://www.harald-schreiber.de/
For reference the gphoto2 page is also quite helpful.
Thanks for the fast help. Mounting my camera as a removable media works fine.
Thanks a lot.
Stefan
:)
I tried the change to fstab but I get "/dev/sda1 is not a valid blockQuote:
Originally Posted by tweety77
device".
What am I doing wring?
TIA
Paul
Try /dev/sdb1
instead of /dev/sda1
This assumes that you already assigned a device to /dev/sda1 so we move to the next available: sdb1
Play with it if you have more than two devices like this.
sakiZ
if you issue the coimand below in a console the information displayed
might help you solve the puzzle.Code:dmesg|grep sd
Check out s10sh for canon cameras:
http://www.kyuzz.org/antirez/s10sh.html
http://www.reynoldsnet.org/s10sh/
<<<YES- I mount my Fuji FinePix 1400Zoom by editing the /etc/fstab file: >>
<<<# This will add support for a USB camera to be mounted as a removable media
/dev/sda1 /mnt/XXXX auto noauto,user,rw 0 >>>
Remember to create the directory XXXX (can be any name) under /mnt (You can also make this any directory, anywhere. >>>>
This worked for my Fuji FinePix 2300 camera as well.
Man, what a relief!!!
sakiZ
:shock: for the above post, dmesg | grep sd is telling you to look at the messages to see if you have a device that was mounted as /dev/sda1 or /dev/sdb1 which is a SCSI mount point when your USB camera was plugged in to the USB cable. The HotPlug will detect the change and print out a message.
# mount could tell you if your camera has mounted as a filesystem, that you read and write to directly
You might also list what the Linux Kernel sees attached to the USB port with the following
# ls /proc/bus/usb
# cat /proc/bus/usb/devices
Thanks for this thread, it was instructional. On a hard disk install of Knoppix that has been upgraded using apt-get, dselect, kpackage, or synaptic
apt-get install gtkam
you might have to add the group camera to a users profile with kde-user manager. also add check box for the audio groups to.
In a consol terminal window, make a directory to save your pictures in. Change directory to that area, start gtkam (which is a graphic user interface ) to gphoto2 libphoto2 and one other software XX
#mkdir mypics
#cd mypics
#gtkam
re-scan and detect your camera. Select it. Then download and save your pictures
I open konqueror to the location file:///home/knoppix/mypics then select the ICON view, and set the ICON size to HUGE, then I can view all the pictures simutaneously to select and delete the ones I don;t want.
I hope other readers add to the knowledge here of HowTo install and use a USB Digital Camera on Knoppix / Debian. This was my two sents worth that uses gtkam with a cheap old SIPIX StyleCam BlinkII with USB interface. Long Live Knoppix Linux!! Knoppix has helped me to use my camera and my Cell phone.
Sanyo 4900 on a SPrintPCS cell phone
Here in the USA, have a SprintPCS cell phone? Buy the FutureDial USB cable to connect the Sanyo 4900 SprintPCS cell phone to Knoppix 3.4 Linux as a modem for surfing the web / email at 7K to 14.4K bytes per second rate. What is the secret command to issue in a console window to surf the internet?
# pon sprint
I just could not believe it!! It was all there in Knoppix (Debian) Linux one $22 cable (www.futuredial.com) and one 10 character command line and I was on line!!! I was using a computer in my 18 wheeler Rig, no access to a phone line to dial in. My particular SprintPCS plan gave me unlimited Data connection. Your plan may be different. It logs in by sending the dialup command #777 through the /dev/usb/ttyACM0 usb serial port device.
Fred Finster
fredfinster (AT) netscape (DOT) net