Printable View
Knoppix used to work just fine on my ECS mainboard, but now i have upgraded to a Soyo KT333 Dragon Plus. It detects eth0 fine, but DHCP doesn't work. I;ve tried entering the IP and all that manually, and it still doesn't connect. Anyone know what the problem could be?
What do you mean by "dhcp", client or server?
Are you behind a router or do you have a direct connection to internet?
I'm behind a router, i would be the DHCP client
Try booting Knoppix with the noapic option. Also, try booting then open a shell and enter "sudo mii-tools -r" then run "netcardconfig" and see if dhcp works (if it still doesn't, see if you can configure it manually, also done in netcardconfig).
edit: sorry, double post.
Quote:
Originally Posted by activeco
Still no luck. the no apic option seems to make no difference. I even manually put in the IP, netmask, etc...
Knoppix says it detects eth0, could it be detecting it wrong??
Let's figure out what's working and what's not. You say you're behind a router, would that be a home cable/DSL router/switch like the Linksys? Do you have other computers on your network? Can you ping the router or the other computers? What happens when you try to do a netcardconfig? Any error message?Quote:
Originally Posted by replica9000
The computer doesn't see the router at all. When I use netcardconfig and let it use DHCP, it just fails. so I enter in all the numbers manually, and it tells me the network is unreachable. Oh and yeah it's a Linksys Cable/DSL router. I've even tried directly pluging the PC into the modem, still nothing. Everything ran fine on my ECS board.
try booting with the cheatcode-
knoppix noapic
If your enter all the numbers manually, among other things IP address, do you specify the same IP for that PC in your router setup?Quote:
Originally Posted by replica9000
Do you have second NIC plugged? Are there some BIOS settings for the onboard NIC?
The mac address for the nic is stored in the router, so the PC always gets the same IP running Win or Linux. I'm running WinXP on the same computer. I tried the no apic option and nothing different happened. And the only setting in the bios for the onboard LAN is to turn it on or off. That's the only NIC in the machine.
What is the root passord for knoppix?
Keep the linksys in the connection, it should help. If you have to log in, the Linksys is already taking care of that for you; if on cable the cable provider already gets along fine with the Linksys mac address, no reason for it to see any different one. Plus the Linksys gives you a local known IP address that you should be able to ping.Quote:
Originally Posted by replica9000
What does "it just fails" mean? What does the message say, if there is one (and if there isn't then how do you determine it failed). Does a "sudo mii-tool -r" command from a shell work ok? (don't worry, you don't need a root password.) If so, try a netcardconfig after that and see if that works, but if it gives you an error please tell us what the error is.